From 4f50cdb97c5bc421bd1dccada157d45c3bdb5fc1 Mon Sep 17 00:00:00 2001
From: Violette Roche-Montane <violette.roche-montane@forgerock.com>
Date: Wed, 29 Jan 2014 08:25:04 +0000
Subject: [PATCH] OPENDJ-1303 Split out CLI support from opendj-ldap-toolkit into a separate Maven module, "opendj-cli" Part I. Added required classes.

---
 opendj-cli/src/main/resources/com/forgerock/opendj/cli/cli.properties |  476 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 475 insertions(+), 1 deletions(-)

diff --git a/opendj-cli/src/main/resources/com/forgerock/opendj/cli/cli.properties b/opendj-cli/src/main/resources/com/forgerock/opendj/cli/cli.properties
index d330757..bfb49e9 100755
--- a/opendj-cli/src/main/resources/com/forgerock/opendj/cli/cli.properties
+++ b/opendj-cli/src/main/resources/com/forgerock/opendj/cli/cli.properties
@@ -26,4 +26,478 @@
 #
 # CLI messages
 #
-ERR_CONSOLE_INPUT_ERROR=The response could not be read from the console due to the following error: %s
\ No newline at end of file
+ERR_ARG_NO_IDENTIFIER=The %s argument does not have either a \
+ single-character or a long identifier that may be used to specify it.  At \
+ least one of these must be specified for each argument
+ERR_ARG_NO_VALUE_PLACEHOLDER=The %s argument is configured to take \
+ a value but no value placeholder has been defined for it
+ERR_ARG_NO_INT_VALUE=The %s argument does not have any value that \
+ may be retrieved as an integer
+ERR_ARG_CANNOT_DECODE_AS_INT=The provided value "%s" for the %s \
+ argument cannot be decoded as an integer
+ERR_ARG_INT_MULTIPLE_VALUES=The %s argument has multiple values and \
+ therefore cannot be decoded as a single integer value
+ERR_ARG_NO_BOOLEAN_VALUE=The %s argument does not have any value \
+ that may be retrieved as a Boolean
+ERR_ARG_CANNOT_DECODE_AS_BOOLEAN=The provided value "%s" for the %s \
+ argument cannot be decoded as a Boolean
+ERR_ARG_BOOLEAN_MULTIPLE_VALUES=The %s argument has multiple values \
+ and therefore cannot be decoded as a single Boolean value
+ERR_INTARG_LOWER_BOUND_ABOVE_UPPER_BOUND=The %s argument \
+ configuration is invalid because the lower bound of %d is greater than the \
+ upper bound of %d
+ERR_INTARG_VALUE_BELOW_LOWER_BOUND=The provided %s value %d is \
+ unacceptable because it is below the lower bound of %d
+ERR_INTARG_VALUE_ABOVE_UPPER_BOUND=The provided %s value %d is \
+ unacceptable because it is above the upper bound of %d
+ERR_BOOLEANARG_NO_VALUE_ALLOWED=The provided %s value is \
+ unacceptable because Boolean arguments are never allowed to have values
+ERR_MCARG_VALUE_NOT_ALLOWED=The provided %s value %s is \
+ unacceptable because it is not included in the set of allowed values for that \
+ argument
+ERR_FILEARG_NO_SUCH_FILE=The file %s specified for argument %s does \
+ not exist
+ERR_FILEARG_CANNOT_VERIFY_FILE_EXISTENCE=An error occurred while \
+ trying to verify the existence of file %s specified for argument %s:  %s
+ERR_FILEARG_CANNOT_OPEN_FILE=An error occurred while trying to open \
+ file %s specified for argument %s for reading:  %s
+ERR_FILEARG_CANNOT_READ_FILE=An error occurred while trying to read \
+ from file %s specified for argument %s:  %s
+ERR_FILEARG_EMPTY_FILE=The file %s specified for argument %s exists \
+ but is empty
+ERR_ARGPARSER_DUPLICATE_SHORT_ID=Cannot add argument %s to the \
+ argument list because its short identifier -%s conflicts with the %s argument \
+ that has already been defined
+ERR_ARGPARSER_DUPLICATE_LONG_ID=Cannot add argument %s to the \
+ argument list because its long identifier --%s conflicts with the %s argument \
+ that has already been defined
+ERR_ARGPARSER_CANNOT_READ_PROPERTIES_FILE=An error occurred while \
+ attempting to read the contents of the argument properties file %s:  %s
+ERR_ARGPARSER_TOO_MANY_TRAILING_ARGS=The provided set of \
+ command-line arguments contained too many unnamed trailing arguments.  The \
+ maximum number of allowed trailing arguments is %d
+ERR_ARGPARSER_LONG_ARG_WITHOUT_NAME=The provided argument "%s" is \
+ invalid because it does not include the argument name
+ERR_ARGPARSER_NO_ARGUMENT_WITH_LONG_ID=Argument --%s is not allowed \
+ for use with this program
+ERR_ARGPARSER_NO_VALUE_FOR_ARGUMENT_WITH_LONG_ID=Argument --%s \
+ requires a value but none was provided
+ERR_ARGPARSER_VALUE_UNACCEPTABLE_FOR_LONG_ID=The provided value \
+ "%s" for argument --%s is not acceptable:  %s
+ERR_ARGPARSER_NOT_MULTIVALUED_FOR_LONG_ID=The argument --%s was \
+ included multiple times in the provided set of arguments but it does not \
+ allow multiple values
+ERR_ARGPARSER_ARG_FOR_LONG_ID_DOESNT_TAKE_VALUE=A value was \
+ provided for argument --%s but that argument does not take a value
+ERR_ARGPARSER_INVALID_DASH_AS_ARGUMENT=The dash character by itself \
+ is invalid for use as an argument name
+ERR_ARGPARSER_NO_ARGUMENT_WITH_SHORT_ID=Argument -%s is not allowed \
+ for use with this program
+ERR_ARGPARSER_NO_VALUE_FOR_ARGUMENT_WITH_SHORT_ID=Argument -%s \
+ requires a value but none was provided
+ERR_ARGPARSER_VALUE_UNACCEPTABLE_FOR_SHORT_ID=The provided value \
+ "%s" for argument -%s is not acceptable:  %s
+ERR_ARGPARSER_NOT_MULTIVALUED_FOR_SHORT_ID=The argument -%s was \
+ included multiple times in the provided set of arguments but it does not \
+ allow multiple values
+ERR_ARGPARSER_CANT_MIX_ARGS_WITH_VALUES=The provided argument block \
+ '-%s%s' is illegal because the '%s' argument requires a value but is in the \
+ same block as at least one other argument that doesn't require a value
+ERR_ARGPARSER_DISALLOWED_TRAILING_ARGUMENT=Argument "%s" does not \
+ start with one or two dashes and unnamed trailing arguments are not allowed
+ERR_ARGPARSER_TOO_FEW_TRAILING_ARGUMENTS=At least %d unnamed \
+ trailing arguments are required in the argument list, but too few were \
+ provided
+ERR_ARGPARSER_NO_VALUE_FOR_REQUIRED_ARG=The argument %s is required \
+ to have a value but none was provided in the argument list and no default \
+ value is available
+INFO_TIME_IN_SECONDS=%d seconds
+INFO_TIME_IN_MINUTES_SECONDS=%d minutes, %d seconds
+INFO_TIME_IN_HOURS_MINUTES_SECONDS=%d hours, %d minutes, %d seconds
+INFO_TIME_IN_DAYS_HOURS_MINUTES_SECONDS=%d days, %d hours, %d minutes, %d \
+ seconds
+INFO_SUBCMDPARSER_WHERE_OPTIONS_INCLUDE=Command options:
+ERR_MENU_BAD_CHOICE_SINGLE=Invalid response. Please enter a valid \
+menu option
+INFO_MENU_PROMPT_SINGLE=Enter choice:
+INFO_MENU_PROMPT_RETURN_TO_CONTINUE=Press RETURN to continue
+ERR_CONSOLE_INPUT_ERROR=The response could not be read from the console due to the following error: %s
+INFO_LDAP_CONN_PROMPT_SECURITY_SERVER_CERTIFICATE=Server Certificate:
+INFO_LDAP_CONN_SECURITY_SERVER_CERTIFICATE=%s
+INFO_LDAP_CONN_PROMPT_SECURITY_TRUST_OPTION=Do you trust this server certificate?
+INFO_LDAP_CONN_PROMPT_SECURITY_TRUST_OPTION_NO=No
+INFO_LDAP_CONN_PROMPT_SECURITY_TRUST_OPTION_SESSION=Yes, for this session only
+INFO_LDAP_CONN_PROMPT_SECURITY_TRUST_OPTION_ALWAYS=Yes, also add it to a truststore
+INFO_LDAP_CONN_PROMPT_SECURITY_CERTIFICATE_DETAILS=View certificate details
+INFO_LDAP_CONN_SECURITY_SERVER_CERTIFICATE_USER_DN=User DN  : %s
+INFO_LDAP_CONN_SECURITY_SERVER_CERTIFICATE_VALIDITY=Validity : From '%s'%n             To '%s'
+INFO_LDAP_CONN_SECURITY_SERVER_CERTIFICATE_ISSUER=Issuer   : %s
+INFO_PROMPT_SINGLE_DEFAULT=%s [%s]:
+INFO_ARGPARSER_USAGE_JAVA_CLASSNAME=Usage:  java %s  {options}
+INFO_ARGPARSER_USAGE_JAVA_SCRIPTNAME=Usage:  %s  {options}
+INFO_ARGPARSER_USAGE_TRAILINGARGS={trailing-arguments}
+INFO_ARGPARSER_USAGE_DEFAULT_VALUE=Default value: %s
+#
+# Extension messages
+#
+#
+# Tools messages
+#
+ERR_CANNOT_INITIALIZE_ARGS=An unexpected error occurred while \
+ attempting to initialize the command-line arguments:  %s
+ERR_ERROR_PARSING_ARGS=An error occurred while parsing the \
+ command-line arguments:  %s
+INFO_PROCESSING_OPERATION=Processing %s request for %s
+INFO_OPERATION_FAILED=%s operation failed
+INFO_OPERATION_SUCCESSFUL=%s operation successful for DN %s
+INFO_PROCESSING_COMPARE_OPERATION=Comparing type %s with value %s in \
+ entry %s
+INFO_COMPARE_OPERATION_RESULT_FALSE=Compare operation returned false for \
+ entry %s
+INFO_COMPARE_OPERATION_RESULT_TRUE=Compare operation returned true for \
+ entry %s
+INFO_DESCRIPTION_TRUSTALL=Trust all server SSL certificates
+INFO_DESCRIPTION_BINDDN=DN to use to bind to the server
+INFO_DESCRIPTION_BINDPASSWORD=Password to use to bind to \
+ the server
+INFO_DESCRIPTION_BINDPASSWORDFILE=Bind password file
+INFO_DESCRIPTION_ENCODING=Use the specified character set for \
+ command-line input
+INFO_DESCRIPTION_VERBOSE=Use verbose mode
+INFO_DESCRIPTION_KEYSTOREPATH=Certificate key store path
+INFO_DESCRIPTION_TRUSTSTOREPATH=Certificate trust store path
+INFO_DESCRIPTION_KEYSTOREPASSWORD=Certificate key store PIN
+INFO_DESCRIPTION_HOST=Directory server hostname or IP address
+INFO_DESCRIPTION_PORT=Directory server port number
+INFO_DESCRIPTION_SHOWUSAGE=Display this usage information
+INFO_DESCRIPTION_CONTROLS=Use a request control with the provided \
+ information
+INFO_DESCRIPTION_CONTINUE_ON_ERROR=Continue processing even if there are \
+ errors
+INFO_DESCRIPTION_USE_SSL=Use SSL for secure communication with the server
+INFO_DESCRIPTION_START_TLS=Use StartTLS to secure communication with the \
+ server
+INFO_MODIFY_DESCRIPTION_DEFAULT_ADD=Treat records with no changetype as \
+ add operations
+INFO_SEARCH_DESCRIPTION_BASEDN=Search base DN
+INFO_SEARCH_DESCRIPTION_SIZE_LIMIT=Maximum number of entries to return \
+ from the search
+INFO_SEARCH_DESCRIPTION_TIME_LIMIT=Maximum length of time in seconds to \
+ allow for the search
+INFO_SEARCH_DESCRIPTION_SEARCH_SCOPE=Search scope ('base', 'one', 'sub', \
+ or 'subordinate')
+INFO_SEARCH_DESCRIPTION_DEREFERENCE_POLICY=Alias dereference policy \
+ ('never', 'always', 'search', or 'find')
+ERR_LDAPAUTH_UNSUPPORTED_SASL_MECHANISM=The requested SASL mechanism \
+ "%s" is not supported by this client
+ERR_LDAPAUTH_SASL_AUTHID_REQUIRED=The "authid" SASL property is \
+ required for use with the %s mechanism
+INFO_DESCRIPTION_VERSION=LDAP protocol version number
+ERR_DESCRIPTION_INVALID_VERSION=Invalid LDAP version number '%s'. \
+ Allowed values are 2 and 3
+ERR_SEARCH_NO_FILTERS=No filters specified for the search request
+INFO_DESCRIPTION_DONT_WRAP=Do not wrap long lines
+INFO_DESCRIPTION_NOOP=Show what would be done but do not perform any \
+ operation
+INFO_DESCRIPTION_TYPES_ONLY=Only retrieve attribute names but not their \
+ values
+INFO_DESCRIPTION_ASSERTION_FILTER=Use the LDAP assertion control with the \
+ provided filter
+ERR_LDAP_ASSERTION_INVALID_FILTER=The search filter provided for the \
+ LDAP assertion control was invalid:  %s
+INFO_DESCRIPTION_PREREAD_ATTRS=Use the LDAP ReadEntry pre-read control
+INFO_DESCRIPTION_POSTREAD_ATTRS=Use the LDAP ReadEntry post-read control
+INFO_LDAPMODIFY_PREREAD_ENTRY=Target entry before the operation:
+INFO_LDAPMODIFY_POSTREAD_ENTRY=Target entry after the operation:
+INFO_DESCRIPTION_PROXY_AUTHZID=Use the proxied authorization control with \
+ the given authorization ID
+INFO_DESCRIPTION_PSEARCH_INFO=Use the persistent search control
+ERR_PSEARCH_MISSING_DESCRIPTOR=The request to use the persistent \
+ search control did not include a descriptor that indicates the options to use \
+ with that control
+ERR_PSEARCH_DOESNT_START_WITH_PS=The persistent search descriptor %s \
+ did not start with the required 'ps' string
+ERR_PSEARCH_INVALID_CHANGE_TYPE=The provided change type value %s is \
+ invalid.  The recognized change types are add, delete, modify, modifydn, and \
+ any
+ERR_PSEARCH_INVALID_CHANGESONLY=The provided changesOnly value %s is \
+ invalid.  Allowed values are 1 to only return matching entries that have \
+ changed since the beginning of the search, or 0 to also include existing \
+ entries that match the search criteria
+ERR_PSEARCH_INVALID_RETURN_ECS=The provided returnECs value %s is \
+ invalid.  Allowed values are 1 to request that the entry change notification \
+ control be included in updated entries, or 0 to exclude the control from \
+ matching entries
+INFO_DESCRIPTION_REPORT_AUTHZID=Use the authorization identity control
+INFO_BIND_AUTHZID_RETURNED=# Bound with authorization ID %s
+INFO_SEARCH_DESCRIPTION_FILENAME=File containing a list of search filter \
+ strings
+INFO_DESCRIPTION_MATCHED_VALUES_FILTER=Use the LDAP matched values \
+ control with the provided filter
+ERR_LDAP_MATCHEDVALUES_INVALID_FILTER=The provided matched values \
+ filter was invalid:  %s
+ERR_LDIF_FILE_CANNOT_OPEN_FOR_READ=An error occurred while \
+ attempting to open the LDIF file %s for reading:  %s
+ERR_LDIF_FILE_CANNOT_OPEN_FOR_WRITE=An error occurred while \
+ attempting to open the LDIF file %s for writing:  %s
+ERR_LDIF_FILE_READ_ERROR=An error occurred while attempting to read \
+ the contents of LDIF file %s:  %s
+INFO_BIND_PASSWORD_EXPIRED=# Your password has expired
+INFO_BIND_PASSWORD_EXPIRING=# Your password will expire in %s
+INFO_BIND_ACCOUNT_LOCKED=# Your account has been locked
+INFO_BIND_MUST_CHANGE_PASSWORD=# You must change your password before any \
+ other operations will be allowed
+INFO_BIND_GRACE_LOGINS_REMAINING=# You have %d grace logins remaining
+INFO_DESCRIPTION_USE_PWP_CONTROL=Use the password policy request control
+INFO_LDAPPWMOD_DESCRIPTION_AUTHZID=Authorization ID for the \
+ user entry whose password should be changed
+INFO_LDAPPWMOD_DESCRIPTION_NEWPW=New password to provide \
+ for the target user
+INFO_LDAPPWMOD_DESCRIPTION_NEWPWFILE=Path to a file \
+ containing the new password to provide for the target user
+INFO_LDAPPWMOD_DESCRIPTION_CURRENTPW=Current password for \
+ the target user
+INFO_LDAPPWMOD_DESCRIPTION_CURRENTPWFILE=Path to a file \
+ containing the current password for the target user
+ERR_LDAPPWMOD_CONFLICTING_ARGS=The %s and %s arguments may not be \
+ provided together
+ERR_LDAPPWMOD_FAILED=The LDAP password modify operation failed: \
+ %d (%s)
+ERR_LDAPPWMOD_FAILURE_ERROR_MESSAGE=Error Message:  %s
+ERR_LDAPPWMOD_FAILURE_MATCHED_DN=Matched DN:  %s
+INFO_LDAPPWMOD_SUCCESSFUL=The LDAP password modify operation was \
+ successful
+INFO_LDAPPWMOD_ADDITIONAL_INFO=Additional Info:  %s
+INFO_LDAPPWMOD_GENERATED_PASSWORD=Generated Password:  %s
+INFO_COMPARE_CANNOT_BASE64_DECODE_ASSERTION_VALUE=The assertion value was \
+ indicated to be base64-encoded, but an error occurred while trying to decode \
+ the value
+INFO_COMPARE_CANNOT_READ_ASSERTION_VALUE_FROM_FILE=Unable to read the \
+ assertion value from the specified file:  %s
+ERR_LDAPCOMPARE_NO_DNS=No entry DNs provided for the compare \
+ operation
+INFO_LDAPCOMPARE_TOOL_DESCRIPTION=This utility can be used to perform \
+ LDAP compare operations in the Directory Server
+INFO_LDAPMODIFY_TOOL_DESCRIPTION=This utility can be used to perform LDAP \
+ modify, add, delete, and modify DN operations in the Directory Server
+INFO_LDAPPWMOD_TOOL_DESCRIPTION=This utility can be used to perform LDAP \
+ password modify operations in the Directory Server
+INFO_LDAPSEARCH_TOOL_DESCRIPTION=This utility can be used to perform LDAP \
+ search operations in the Directory Server
+ERR_TOOL_CONFLICTING_ARGS=You may not provide both the --%s and \
+ the --%s arguments
+ERR_LDAPCOMPARE_NO_ATTR=No attribute was specified to use as the \
+ target for the comparison
+ERR_LDAPCOMPARE_INVALID_ATTR_STRING=Invalid attribute string '%s'. \
+ The attribute string must be in one of the following forms: \
+ 'attribute:value', 'attribute::base64value', or 'attribute:<valueFilePath'
+ERR_TOOL_INVALID_CONTROL_STRING=Invalid control specification '%s'
+ERR_TOOL_SASLEXTERNAL_NEEDS_SSL_OR_TLS=SASL EXTERNAL \
+ authentication may only be requested if SSL or StartTLS is used
+ERR_TOOL_SASLEXTERNAL_NEEDS_KEYSTORE=SASL EXTERNAL authentication \
+ may only be used if a client certificate key store is specified
+INFO_LDAPSEARCH_PSEARCH_CHANGE_TYPE=# Persistent search change type:  %s
+INFO_LDAPSEARCH_PSEARCH_PREVIOUS_DN=# Persistent search previous entry \
+ DN:  %s
+INFO_LDAPSEARCH_ACCTUSABLE_HEADER=# Account Usability Response Control
+INFO_LDAPSEARCH_ACCTUSABLE_IS_USABLE=#   The account is usable
+INFO_LDAPSEARCH_ACCTUSABLE_TIME_UNTIL_EXPIRATION=#   Time until password \
+ expiration:  %s
+INFO_LDAPSEARCH_ACCTUSABLE_NOT_USABLE=#   The account is not usable
+INFO_LDAPSEARCH_ACCTUSABLE_ACCT_INACTIVE=#   The account has been \
+ deactivated
+INFO_LDAPSEARCH_ACCTUSABLE_PW_RESET=#   The password has been reset
+INFO_LDAPSEARCH_ACCTUSABLE_PW_EXPIRED=#   The password has expired
+INFO_LDAPSEARCH_ACCTUSABLE_REMAINING_GRACE=#   Number of grace logins \
+ remaining:  %d
+INFO_LDAPSEARCH_ACCTUSABLE_LOCKED=#   The account is locked
+INFO_LDAPSEARCH_ACCTUSABLE_TIME_UNTIL_UNLOCK=#   Time until the account \
+ is unlocked:  %s
+INFO_DESCRIPTION_KEYSTOREPASSWORD_FILE=Certificate key store PIN file
+INFO_DESCRIPTION_TRUSTSTOREPASSWORD=Certificate trust store PIN
+INFO_DESCRIPTION_TRUSTSTOREPASSWORD_FILE=Certificate trust store PIN file
+INFO_DESCRIPTION_COUNT_ENTRIES=Count the number of entries returned by \
+ the server
+INFO_LDAPSEARCH_MATCHING_ENTRY_COUNT=# Total number of matching entries: \
+ %d
+INFO_DESCRIPTION_SIMPLE_PAGE_SIZE=Use the simple paged results control \
+ with the given page size
+ERR_PAGED_RESULTS_REQUIRES_SINGLE_FILTER=The simple paged results \
+ control may only be used with a single search filter
+INFO_DESCRIPTION_CERT_NICKNAME=Nickname of certificate for SSL client \
+ authentication
+ERR_TOOL_RESULT_CODE=Result Code:  %d (%s)
+ERR_TOOL_ERROR_MESSAGE=Additional Information:  %s
+ERR_TOOL_MATCHED_DN=Matched DN:  %s
+INFO_LDAPMODIFY_DESCRIPTION_FILENAME=LDIF file containing \
+ the changes to apply
+INFO_DESCRIPTION_SORT_ORDER=Sort the results using the provided sort \
+ order
+ERR_LDAP_SORTCONTROL_INVALID_ORDER=The provided sort order was \
+ invalid:  %s
+INFO_DESCRIPTION_VLV=Use the virtual list view control to retrieve the \
+ specified results page
+ERR_LDAPSEARCH_VLV_REQUIRES_SORT=If the --%s argument is provided, \
+ then the --%s argument must also be given
+ERR_LDAPSEARCH_VLV_INVALID_DESCRIPTOR=The provided virtual list view \
+ descriptor was invalid.  It must be a value in the form \
+ 'beforeCount:afterCount:offset:contentCount' (where offset specifies the \
+ index of the target entry and contentCount specifies the estimated total \
+ number of results or zero if it is not known), or \
+ 'beforeCount:afterCount:assertionValue' (where the entry should be the first \
+ entry whose primary sort value is greater than or equal to the provided \
+ assertionValue).  In either case, beforeCount is the number of entries to \
+ return before the target value and afterCount is the number of entries to \
+ return after the target value
+WARN_LDAPSEARCH_SORT_ERROR=# Server-side sort failed:  %s
+INFO_LDAPSEARCH_VLV_TARGET_OFFSET=# VLV Target Offset:  %d
+INFO_LDAPSEARCH_VLV_CONTENT_COUNT=# VLV Content Count:  %d
+WARN_LDAPSEARCH_VLV_ERROR=# Virtual list view processing failed: \
+ %s
+INFO_DESCRIPTION_EFFECTIVERIGHTS_USER=Use geteffectiverights control with \
+ the provided authzid
+INFO_DESCRIPTION_EFFECTIVERIGHTS_ATTR=Specifies geteffectiverights \
+ control specific attribute list
+ERR_EFFECTIVERIGHTS_INVALID_AUTHZID=The authorization ID "%s" \
+ contained in the geteffectiverights control is invalid because it does not \
+ start with "dn:" to indicate a user DN
+INFO_DESCRIPTION_PRODUCT_VERSION=Display Directory Server version \
+ information
+INFO_DESCRIPTION_SCRIPT_FRIENDLY=Use script-friendly mode
+ERR_LDAP_CONN_CANNOT_INITIALIZE_SSL=ERROR:  Unable to perform SSL \
+ initialization:  %s
+ERR_LDAP_CONN_CANNOT_PARSE_SASL_OPTION=ERROR:  The provided SASL \
+ option string "%s" could not be parsed in the form "name=value"
+INFO_LDAP_CONN_DESCRIPTION_SASLOPTIONS=SASL bind options
+INFO_DESCRIPTION_PROP_FILE_PATH=Path to the file containing default \
+  property values used for command line arguments
+INFO_DESCRIPTION_NO_PROP_FILE=No properties file will be \
+  used to get default command line argument values
+INFO_DESCRIPTION_GENERAL_ARGS=General options:
+INFO_DESCRIPTION_IO_ARGS=Utility input/output options:
+INFO_DESCRIPTION_LDAP_CONNECTION_ARGS=LDAP connection options:
+INFO_FILE_PLACEHOLDER={file}
+INFO_KEYSTOREPATH_PLACEHOLDER={keyStorePath}
+INFO_TRUSTSTOREPATH_PLACEHOLDER={trustStorePath}
+INFO_BINDPWD_FILE_PLACEHOLDER={bindPasswordFile}
+INFO_HOST_PLACEHOLDER={host}
+INFO_PORT_PLACEHOLDER={port}
+INFO_BASEDN_PLACEHOLDER={baseDN}
+INFO_BINDDN_PLACEHOLDER={bindDN}
+INFO_BINDPWD_PLACEHOLDER={bindPassword}
+INFO_KEYSTORE_PWD_PLACEHOLDER={keyStorePassword}
+INFO_TRUSTSTORE_PWD_FILE_PLACEHOLDER={path}
+INFO_TRUSTSTORE_PWD_PLACEHOLDER={trustStorePassword}
+INFO_NICKNAME_PLACEHOLDER={nickname}
+INFO_ASSERTION_FILTER_PLACEHOLDER={filter}
+INFO_FILTER_PLACEHOLDER={filter}
+INFO_PROXYAUTHID_PLACEHOLDER={authzID}
+INFO_SASL_OPTION_PLACEHOLDER={name=value}
+INFO_PROTOCOL_VERSION_PLACEHOLDER={version}
+INFO_PROP_FILE_PATH_PLACEHOLDER={propertiesFilePath}
+INFO_ATTRIBUTE_PLACEHOLDER={attribute}
+INFO_NUM_ENTRIES_PLACEHOLDER={numEntries}
+INFO_LDAP_CONTROL_PLACEHOLDER={controloid[:criticality[:value|::b64value|:<filePath]]}
+INFO_ENCODING_PLACEHOLDER={encoding}
+INFO_ATTRIBUTE_LIST_PLACEHOLDER={attrList}
+INFO_NEW_PASSWORD_PLACEHOLDER={newPassword}
+INFO_CURRENT_PASSWORD_PLACEHOLDER={currentPassword}
+INFO_SEARCH_SCOPE_PLACEHOLDER={searchScope}
+INFO_SORT_ORDER_PLACEHOLDER={sortOrder}
+INFO_VLV_PLACEHOLDER={before:after:index:count | before:after:value}
+INFO_DEREFERENCE_POLICE_PLACEHOLDER={dereferencePolicy}
+INFO_SIZE_LIMIT_PLACEHOLDER={sizeLimit}
+INFO_TIME_LIMIT_PLACEHOLDER={timeLimit}
+INFO_TARGETDN_PLACEHOLDER={targetDN}
+INFO_KEYSTORE_PWD_FILE_PLACEHOLDER={keyStorePasswordFile}
+INFO_PSEARCH_PLACEHOLDER=ps[:changetype[:changesonly[:entrychgcontrols]]]
+ERR_CANNOT_READ_TRUSTSTORE=Cannot access trust store '%s'.  Verify \
+ that the provided trust store exists and that you have read access rights to it
+ERR_CANNOT_READ_KEYSTORE=Cannot access key store '%s'.  Verify \
+ that the provided key store exists and that you have read access rights to it
+INFO_DESCRIPTION_ADMIN_PORT=Directory server administration port number
+ERR_LDAPCOMPARE_ERROR_READING_FILE=An error occurred reading file \
+ '%s'.  Check that the file exists and that you have read access rights to \
+ it.  Details: %s
+ERR_LDAPCOMPARE_FILENAME_AND_DNS=Both entry DNs and a file name \
+ were provided for the compare operation.  These arguments are not compatible
+INFO_ERROR_EMPTY_RESPONSE=ERROR: a response must be provided in order to continue
+ERR_DECODE_CONTROL_FAILURE=# %s
+INFO_SEARCHRATE_TOOL_DESCRIPTION=This utility can be used to measure \
+  search throughput and response time of a directory service using \
+  user-defined searches.\n\n\
+  Example:\n\n\ \ searchrate -p 1389 -D "cn=directory manager" -w password \\\n\
+  \ \ \ \ -F -c 4 -t 4 -b "dc=example,dc=com" -g "rand(0,2000)" "(uid=user.%%d)"
+INFO_SEARCHRATE_TOOL_DESCRIPTION_BASEDN=Base DN format string.
+INFO_MODRATE_TOOL_DESCRIPTION=This utility can be used to measure \
+  modify throughput and response time of a directory service using \
+  user-defined modifications.\n\n\
+  Example:\n\n\ \ modrate -p 1389 -D "cn=directory manager" -w password \\\n\
+  \ \ \ \ -F -c 4 -t 4 -b "uid=user.%%d,ou=people,dc=example,dc=com" \\\n\
+  \ \ \ \ -g "rand(0,2000)" -g "randstr(16)" 'description:%%2$s'
+INFO_MODRATE_TOOL_DESCRIPTION_TARGETDN=Target entry DN format string
+INFO_AUTHRATE_TOOL_DESCRIPTION=This utility can be used to measure \
+  bind throughput and response time of a directory service using \
+  user-defined bind or search-then-bind operations.\n\nFormat strings may be \
+  used in the bind DN option as well as the authid and authzid SASL bind \
+  options. A search operation may be used to retrieve the bind DN by \
+  specifying the base DN and a filter. The retrieved entry DN will be appended \
+  as the last argument in the argument list when evaluating format strings.\n\n\
+  Example (bind only):\n\n\ \ authrate -p 1389 -D "uid=user.%%d,ou=people,dc=example,dc=com" \\\n\
+  \ \ \ \  -w password -f -c 10 -g "rand(0,2000)"\n\n\
+  Example (search then bind):\n\n\ \ authrate -p 1389 -D '%%2$s' -w password -f -c 10 \\\n\
+  \ \ \ \ -b "ou=people,dc=example,dc=com" -s one -g "rand(0,2000)" "(uid=user.%%d)"
+INFO_OUTPUT_LDIF_FILE_PLACEHOLDER={file}
+INFO_LDIFMODIFY_DESCRIPTION_OUTPUT_FILENAME=Write updated entries to %s \
+ instead of stdout
+INFO_LDIFDIFF_DESCRIPTION_OUTPUT_FILENAME=Write differences to %s \
+ instead of stdout
+INFO_LDIFSEARCH_DESCRIPTION_OUTPUT_FILENAME=Write search results to %s \
+ instead of stdout
+ERR_LDIFMODIFY_MULTIPLE_USES_OF_STDIN=Unable to use stdin for both the source \
+ LDIF and changes LDIF
+ERR_LDIFDIFF_MULTIPLE_USES_OF_STDIN=Unable to use stdin for both the source \
+ LDIF and target LDIF
+ERR_LDIFMODIFY_PATCH_FAILED=The changes could not be applied for the following \
+ reason: %s
+ERR_LDIFDIFF_DIFF_FAILED=The differences could not be computed for the following \
+ reason: %s
+ERR_LDIFSEARCH_FAILED=The search could not be performed for the following \
+ reason: %s
+INFO_LDIFMODIFY_TOOL_DESCRIPTION=This utility can be used to apply a set of \
+ modify, add, and delete operations to entries contained in an LDIF file
+INFO_LDIFDIFF_TOOL_DESCRIPTION=This utility can be used to compare two LDIF \
+ files and report the differences in LDIF format
+INFO_LDIFSEARCH_TOOL_DESCRIPTION=This utility can be used to perform search \
+ operations against entries contained in an LDIF file
+ #
+ # MakeLDIF tool
+ #
+INFO_MAKELDIF_TOOL_DESCRIPTION=This utility can be used to generate LDIF \
+ data based on a definition in a template file
+INFO_CONSTANT_PLACEHOLDER={name=value}
+INFO_SEED_PLACEHOLDER={seed}
+INFO_PATH_PLACEHOLDER={path}
+INFO_MAKELDIF_DESCRIPTION_CONSTANT=A constant that overrides the value \
+ set in the template file
+INFO_MAKELDIF_DESCRIPTION_LDIF=The path to the LDIF file to be written
+INFO_MAKELDIF_DESCRIPTION_SEED=The seed to use to initialize the random \
+ number generator
+INFO_MAKELDIF_DESCRIPTION_HELP=Show this usage information
+INFO_MAKELDIF_DESCRIPTION_RESOURCE_PATH=Path to look for \
+ MakeLDIF resources (e.g., data files)
+ERR_MAKELDIF_NO_SUCH_RESOURCE_DIRECTORY=The specified resource \
+ directory %s could not be found
+INFO_MAKELDIF_PROCESSED_N_ENTRIES=Processed %d entries
+INFO_MAKELDIF_PROCESSING_COMPLETE=LDIF processing complete. %d entries \
+ written
+ERR_MAKELDIF_EXCEPTION_DURING_PARSE=An error occurred while \
+ parsing template file :  %s
+ERR_MAKELDIF_UNABLE_TO_CREATE_LDIF=An error occurred while \
+ attempting to open LDIF file %s for writing:  %s
+ERR_MAKELDIF_ERROR_WRITING_LDIF=An error occurred while writing data \
+ to LDIF file %s:  %s
+ERR_MAKELDIF_EXCEPTION_DURING_PROCESSING=An error occurred while \
+ processing :  %s
+ERR_CONSTANT_ARG_CANNOT_DECODE=Unable to parse a constant argument, \
+ expecting name=value but got %s

--
Gitblit v1.10.0