From f45e3caf7c8c9b4a6f4807a6a0cbe99aacddd8cd Mon Sep 17 00:00:00 2001 From: Jean-Noel Rouvignac <jean-noel.rouvignac@forgerock.com> Date: Thu, 13 Nov 2014 12:21:49 +0000 Subject: [PATCH] Removed the apparently obsolete "Two spaces after dot" English spacing convention --- opendj3-server-dev/src/messages/messages/config.properties | 378 +++++++++++++++++++++++++++--------------------------- 1 files changed, 189 insertions(+), 189 deletions(-) diff --git a/opendj3-server-dev/src/messages/messages/config.properties b/opendj3-server-dev/src/messages/messages/config.properties index a22ba53..b5bea5a 100644 --- a/opendj3-server-dev/src/messages/messages/config.properties +++ b/opendj3-server-dev/src/messages/messages/config.properties @@ -51,7 +51,7 @@ have at least one value but the resulted operation would have removed all \ values ERR_CONFIG_ATTR_REJECTED_VALUE_2=Provided value %s for configuration \ - attribute %s was rejected. The reason provided was: %s + attribute %s was rejected. The reason provided was: %s ERR_CONFIG_ATTR_SET_VALUES_IS_SINGLE_VALUED_3=Configuration attribute %s \ is single-valued, but multiple values were provided ERR_CONFIG_ATTR_ADD_VALUES_IS_SINGLE_VALUED_4=Configuration attribute %s \ @@ -75,7 +75,7 @@ allowable range for an int ERR_CONFIG_ATTR_INVALID_INT_VALUE_11=Unable to set the value for integer \ configuration attribute %s because the provided value %s cannot be \ - interpreted as an integer value: %s + interpreted as an integer value: %s ERR_CONFIG_ATTR_INT_BELOW_LOWER_BOUND_12=Unable to set the value for \ configuration attribute %s because the provided value %d is less than the \ lowest allowed value of %d @@ -83,7 +83,7 @@ configuration attribute %s because the provided value %d is greater than the \ largest allowed value of %d ERR_CONFIG_ATTR_INT_COULD_NOT_PARSE_14=Unable to parse value %s for \ - configuration attribute %s as an integer value: %s + configuration attribute %s as an integer value: %s ERR_CONFIG_ATTR_NO_STRING_VALUE_15=Unable to retrieve the value for \ configuration attribute %s as a string because that attribute does not have \ any values @@ -100,9 +100,9 @@ value and a unit for configuration attribute %s because no value/unit \ delimiter could be found ERR_CONFIG_ATTR_COULD_NOT_PARSE_INT_COMPONENT_21=Could not decode the \ - integer portion of value %s for configuration attribute %s: %s + integer portion of value %s for configuration attribute %s: %s ERR_CONFIG_ATTR_INVALID_VALUE_WITH_UNIT_22=The provided value %s for \ - integer with unit attribute %s is not allowed: %s + integer with unit attribute %s is not allowed: %s ERR_CONFIG_ENTRY_CONFLICTING_CHILD_23=Unable to add configuration entry \ %s as a child of configuration entry %s because a child entry was already \ found with that DN @@ -115,23 +115,23 @@ ERR_CONFIG_FILE_DOES_NOT_EXIST_26=The specified configuration file %s \ does not exist or is not readable ERR_CONFIG_FILE_CANNOT_VERIFY_EXISTENCE_27=An unexpected error occurred \ - while attempting to determine whether configuration file %s exists: %s + while attempting to determine whether configuration file %s exists: %s ERR_CONFIG_FILE_CANNOT_OPEN_FOR_READ_28=An error occurred while \ - attempting to open the configuration file %s for reading: %s + attempting to open the configuration file %s for reading: %s ERR_CONFIG_FILE_READ_ERROR_29=An error occurred while attempting to \ - read the contents of configuration file %s: %s + read the contents of configuration file %s: %s ERR_CONFIG_ATTR_OPTIONS_NOT_ALLOWED_30=Invalid configuration attribute \ - %s detected: the only attribute option allowed in the Directory Server \ + %s detected: the only attribute option allowed in the Directory Server \ configuration is "pending" to indicate the set of pending values ERR_CONFIG_FILE_INVALID_LDIF_ENTRY_31=An error occurred at or near line \ - %d while trying to parse the configuration from LDIF file %s: %s + %d while trying to parse the configuration from LDIF file %s: %s ERR_CONFIG_FILE_EMPTY_32=The specified configuration file %s does not \ appear to contain any configuration entries ERR_CONFIG_FILE_INVALID_BASE_DN_33=The first entry read from LDIF \ configuration file %s had a DN of "%s" rather than the expected "%s" which \ should be used as the Directory Server configuration root ERR_CONFIG_FILE_GENERIC_ERROR_34=An unexpected error occurred while \ - attempting to process the Directory Server configuration file %s: %s + attempting to process the Directory Server configuration file %s: %s ERR_CONFIG_FILE_DUPLICATE_ENTRY_35=Configuration entry %s starting at \ or near line %s in the LDIF configuration file %s has the same DN as another \ entry already read from that file @@ -143,36 +143,36 @@ %d in the configuration LDIF file %s ERR_CONFIG_CANNOT_DETERMINE_SERVER_ROOT_38=Unable to determine the \ Directory Server instance root from either an environment variable or based \ - on the location of the configuration file. Please set an environment \ + on the location of the configuration file. Please set an environment \ variable named %s with a value containing the absolute path to the server \ installation root ERR_CONFIG_FILE_WRITE_ERROR_39=An unexpected error occurred while \ - trying to write configuration entry %s to LDIF: %s + trying to write configuration entry %s to LDIF: %s ERR_CONFIG_FILE_CLOSE_ERROR_40=An unexpected error occurred while \ - trying to close the LDIF writer: %s + trying to close the LDIF writer: %s ERR_CONFIG_FILE_UNWILLING_TO_IMPORT_41=The Directory Server \ configuration may not be altered by importing a new configuration from LDIF WARN_CONFIG_LOGGER_NO_ACTIVE_ACCESS_LOGGERS_44=There are no active \ - access loggers defined in the Directory Server configuration. No access \ + access loggers defined in the Directory Server configuration. No access \ logging will be performed WARN_CONFIG_LOGGER_NO_ACTIVE_ERROR_LOGGERS_45=There are no active \ - error loggers defined in the Directory Server configuration. No error \ + error loggers defined in the Directory Server configuration. No error \ logging will be performed ERR_CONFIG_LOGGER_CANNOT_CREATE_LOGGER_49=An error occurred while \ attempting to create a Directory Server logger from the information in \ - configuration entry %s: %s + configuration entry %s: %s ERR_CONFIG_LOGGER_INVALID_OBJECTCLASS_50=Configuration entry %s does \ not contain a valid objectclass for a Directory Server access, error, or \ debug logger definition ERR_CONFIG_LOGGER_INVALID_ACCESS_LOGGER_CLASS_54=Class %s specified in \ attribute ds-cfg-java-class of configuration entry %s cannot be \ - instantiated as a Directory Server access logger: %s + instantiated as a Directory Server access logger: %s ERR_CONFIG_LOGGER_INVALID_ERROR_LOGGER_CLASS_55=Class %s specified in \ attribute ds-cfg-java-class of configuration entry %s cannot be \ - instantiated as a Directory Server error logger: %s + instantiated as a Directory Server error logger: %s ERR_CONFIG_LOGGER_INVALID_DEBUG_LOGGER_CLASS_56=Class %s specified in \ attribute ds-cfg-java-class of configuration entry %s cannot be \ - instantiated as a Directory Server debug logger: %s + instantiated as a Directory Server debug logger: %s ERR_CONFIG_ATTR_MULTIPLE_PENDING_VALUE_SETS_64=Configuration attribute \ %s appears to contain multiple pending value sets ERR_CONFIG_ATTR_MULTIPLE_ACTIVE_VALUE_SETS_65=Configuration attribute %s \ @@ -186,7 +186,7 @@ configuration attribute %s as a set of integer values because the array \ contained elements of an invalid type (%s) ERR_CONFIG_ATTR_INVALID_STRING_VALUE_69=Unable to parse value %s for \ - configuration attribute %s as a string value: %s + configuration attribute %s as a string value: %s ERR_CONFIG_ATTR_STRING_INVALID_TYPE_70=Unable to parse value %s for \ configuration attribute %s as a string value because the element was of an \ invalid type (%s) @@ -202,23 +202,23 @@ component registered with configuration entry %s ERR_CONFIG_JMX_CANNOT_REGISTER_MBEAN_83=The Directory Server could not \ register a JMX MBean for the component associated with configuration entry \ - %s: %s + %s: %s ERR_CONFIG_LDIF_WRITE_ERROR_84=An unexpected error occurred while \ - trying to export the Directory Server configuration to LDIF: %s + trying to export the Directory Server configuration to LDIF: %s ERR_CONFIG_WORK_QUEUE_TOO_MANY_FAILURES_94=Worker thread "%s" has \ experienced too many repeated failures while attempting to retrieve the next \ operation from the work queue (%d failures experienced, maximum of %d \ - failures allowed). This worker thread will be destroyed + failures allowed). This worker thread will be destroyed ERR_CONFIG_WORK_QUEUE_CANNOT_CREATE_MONITOR_95=A problem occurred \ while trying to create and start an instance of class %s to use as a monitor \ - provider for the Directory Server work queue: %s. No monitor information \ + provider for the Directory Server work queue: %s. No monitor information \ will be available for the work queue ERR_CONFIG_ATTR_DN_NULL_98=A null value was provided for DN \ configuration attribute %s ERR_CONFIG_ATTR_DN_CANNOT_PARSE_99=An error occurred while trying to \ - parse value "%s" of attribute %s as a DN: %s + parse value "%s" of attribute %s as a DN: %s ERR_CONFIG_ATTR_INVALID_DN_VALUE_100=Unable to parse value %s for \ - configuration attribute %s as a DN: %s + configuration attribute %s as a DN: %s ERR_CONFIG_ATTR_DN_INVALID_TYPE_101=Unable to parse value %s for \ configuration attribute %s as a DN because the element was of an invalid type \ (%s) @@ -227,64 +227,64 @@ elements of an invalid type (%s) ERR_CONFIG_CANNOT_REGISTER_AS_PRIVATE_SUFFIX_103=An unexpected error \ occurred while trying to register the configuration handler base DN "%s" as a \ - private suffix with the Directory Server: %s + private suffix with the Directory Server: %s ERR_CONFIG_BACKEND_CANNOT_GET_CONFIG_BASE_104=An error occurred while \ trying to retrieve configuration entry cn=Backends,cn=config in order to \ - initialize the Directory Server backends: %s + initialize the Directory Server backends: %s ERR_CONFIG_BACKEND_BASE_DOES_NOT_EXIST_105=The entry \ cn=Backends,cn=config does not appear to exist in the Directory Server \ - configuration. This is a required entry + configuration. This is a required entry ERR_CONFIG_BACKEND_ERROR_INTERACTING_WITH_BACKEND_ENTRY_107=An \ unexpected error occurred while interacting with backend configuration entry \ - %s: %s + %s: %s INFO_CONFIG_BACKEND_ATTR_DESCRIPTION_CLASS_109=Fully-qualified \ name of the Java class that should provide the core logic for this backend \ - implementation. Changes to this configuration attribute will not take effect \ + implementation. Changes to this configuration attribute will not take effect \ until the backend is disabled and re-enabled or the server is restarted INFO_CONFIG_BACKEND_DISABLED_111=The backend defined in configuration entry \ %s is marked as disabled and therefore will not be used ERR_CONFIG_BACKEND_UNABLE_TO_DETERMINE_ENABLED_STATE_112=An unexpected \ error occurred while attempting to determine whether the backend associated \ - with configuration entry %s should be enabled or disabled: %s. It will be \ + with configuration entry %s should be enabled or disabled: %s. It will be \ disabled ERR_CONFIG_BACKEND_CANNOT_INSTANTIATE_115=The Directory Server was \ unable to load class %s and use it to create a backend instance as defined in \ - configuration entry %s. The error that occurred was: %s. This backend will \ + configuration entry %s. The error that occurred was: %s. This backend will \ be disabled ERR_CONFIG_BACKEND_CANNOT_INITIALIZE_116=An error occurred while \ trying to initialize a backend loaded from class %s with the information in \ - configuration entry %s: %s. This backend will be disabled + configuration entry %s: %s. This backend will be disabled ERR_CONFIG_BACKEND_CLASS_NOT_BACKEND_117=The class %s specified in \ configuration entry %s does not contain a valid Directory Server backend \ implementation NOTE_CONFIG_BACKEND_ACTION_REQUIRED_TO_CHANGE_CLASS_118=The requested \ change to configuration entry %s would cause the class for the associated \ - backend to change from %s to %s. This change will not take effect until the \ + backend to change from %s to %s. This change will not take effect until the \ backend is disabled and re-enabled, or until the Directory Server is \ restarted NOTE_CONFIG_BACKEND_CANNOT_REMOVE_BACKEND_WITH_SUBORDINATES_119=The backend \ - defined in configuration entry %s has one or more subordinate backends. A \ + defined in configuration entry %s has one or more subordinate backends. A \ backend may not be removed if it has subordinate backends ERR_CONFIG_MONITOR_INITIALIZATION_FAILED_140=An error occurred while \ trying to initialize an instance of class %s as a monitor provider as defined \ - in configuration entry %s: %s + in configuration entry %s: %s ERR_CONFIG_CONNHANDLER_CANNOT_INITIALIZE_154=An error occurred while \ trying to initialize a connection handler loaded from class %s with the \ - information in configuration entry %s: %s. This connection handler will be \ + information in configuration entry %s: %s. This connection handler will be \ disabled ERR_CONFIG_SCHEMA_MR_CANNOT_INITIALIZE_172=An error occurred while \ trying to initialize a matching rule loaded from class %s with the \ - information in configuration entry %s: %s. This matching rule will be \ + information in configuration entry %s: %s. This matching rule will be \ disabled WARN_CONFIG_SCHEMA_MR_CONFLICTING_MR_173=The matching rule defined in \ configuration entry %s conflicts with another matching rule defined in the \ - server configuration: %s. This matching rule will not be used + server configuration: %s. This matching rule will not be used ERR_CONFIG_SCHEMA_SYNTAX_CANNOT_INITIALIZE_186=An error occurred while \ trying to initialize an attribute syntax loaded from class %s with the \ - information in configuration entry %s: %s. This syntax will be disabled + information in configuration entry %s: %s. This syntax will be disabled WARN_CONFIG_SCHEMA_SYNTAX_CONFLICTING_SYNTAX_187=The attribute syntax \ defined in configuration entry %s conflicts with another syntax defined in \ - the server configuration: %s. This attribute syntax will not be used + the server configuration: %s. This attribute syntax will not be used ERR_CONFIG_SCHEMA_NO_SCHEMA_DIR_188=Unable to read the Directory \ Server schema definitions because the schema directory %s does not exist ERR_CONFIG_SCHEMA_DIR_NOT_DIRECTORY_189=Unable to read the Directory \ @@ -292,39 +292,39 @@ directory ERR_CONFIG_SCHEMA_CANNOT_LIST_FILES_190=Unable to read the Directory \ Server schema definitions from directory %s because an unexpected error \ - occurred while trying to list the files in that directory: %s + occurred while trying to list the files in that directory: %s WARN_CONFIG_SCHEMA_CANNOT_OPEN_FILE_191=Schema configuration file %s \ in directory %s cannot be parsed because an unexpected error occurred while \ - trying to open the file for reading: %s + trying to open the file for reading: %s WARN_CONFIG_SCHEMA_CANNOT_READ_LDIF_ENTRY_192=Schema configuration \ file %s in directory %s cannot be parsed because an unexpected error occurred \ - while trying to read its contents as an LDIF entry: %s + while trying to read its contents as an LDIF entry: %s WARN_CONFIG_SCHEMA_CANNOT_PARSE_ATTR_TYPE_193=Unable to parse an \ - attribute type definition from schema configuration file %s: %s + attribute type definition from schema configuration file %s: %s WARN_CONFIG_SCHEMA_CONFLICTING_ATTR_TYPE_194=An attribute type read \ from schema configuration file %s conflicts with another attribute type \ - already read into the schema: %s. The later attribute type definition will \ + already read into the schema: %s. The later attribute type definition will \ be used WARN_CONFIG_SCHEMA_CONFLICTING_OC_195=An objectclass read from schema \ configuration file %s conflicts with another objectclass already read into \ - the schema: %s. The later objectclass definition will be used + the schema: %s. The later objectclass definition will be used WARN_CONFIG_SCHEMA_CANNOT_PARSE_OC_196=An objectclass read from schema \ - configuration file %s could not be parsed: %s + configuration file %s could not be parsed: %s ERR_CONFIG_ENTRYCACHE_CANNOT_INSTALL_DEFAULT_CACHE_200=An unexpected \ error occurred that prevented the server from installing its default entry \ - cache framework: %s + cache framework: %s WARN_CONFIG_ENTRYCACHE_NO_CONFIG_ENTRY_201=The entry cache \ configuration entry "cn=Entry Caches,cn=config" does not exist in the \ - Directory Server configuration. No entry cache will be available until this \ + Directory Server configuration. No entry cache will be available until this \ entry is created with a valid entry cache configuration ERR_CONFIG_ENTRYCACHE_CANNOT_INITIALIZE_CACHE_202=An error occurred \ while attempting to initialize an instance of class %s for use as the \ - Directory Server entry cache: %s. As a result, the entry cache will be \ + Directory Server entry cache: %s. As a result, the entry cache will be \ disabled ERR_CONFIG_ENTRYCACHE_CONFIG_NOT_ACCEPTABLE_203=The configuration for \ - the entry cache defined in configuration entry %s was not acceptable: %s + the entry cache defined in configuration entry %s was not acceptable: %s ERR_CONFIG_ENTRYCACHE_CONFIG_LEVEL_NOT_ACCEPTABLE_204=The configuration \ - for the entry cache defined in configuration entry %s was not acceptable: \ + for the entry cache defined in configuration entry %s was not acceptable: \ the entry cache level %d is already in use INFO_WARN_CONFIG_ENTRYCACHE_NO_MONITOR_CONFIG_ENTRY_205=The configuration for \ the entry cache %s monitor provider was not available. As a result this \ @@ -333,45 +333,45 @@ the entry cache %s monitor provider was disabled. As a result the monitor \ provider %s will not be enabled ERR_CONFIG_ENTRY_CANNOT_REMOVE_CHILD_215=An unexpected error occurred \ - while attempting to remove entry %s as a child of configuration entry %s: %s + while attempting to remove entry %s as a child of configuration entry %s: %s WARN_CONFIG_SCHEMA_CANNOT_PARSE_NAME_FORM_216=Unable to parse a name \ - form definition from schema configuration file %s: %s + form definition from schema configuration file %s: %s WARN_CONFIG_SCHEMA_CONFLICTING_NAME_FORM_217=A name form read from \ schema configuration file %s conflicts with another name form already read \ - into the schema: %s. The later name form definition will be used + into the schema: %s. The later name form definition will be used WARN_CONFIG_SCHEMA_CANNOT_PARSE_DCR_218=Unable to parse a DIT content \ - rule definition from schema configuration file %s: %s + rule definition from schema configuration file %s: %s WARN_CONFIG_SCHEMA_CONFLICTING_DCR_219=A DIT content rule read from \ schema configuration file %s conflicts with another DIT content rule already \ - read into the schema: %s. The later DIT content rule definition will be \ + read into the schema: %s. The later DIT content rule definition will be \ used WARN_CONFIG_SCHEMA_CANNOT_PARSE_DSR_220=Unable to parse a DIT \ - structure rule definition from schema configuration file %s: %s + structure rule definition from schema configuration file %s: %s WARN_CONFIG_SCHEMA_CONFLICTING_DSR_221=A DIT structure rule read from \ schema configuration file %s conflicts with another DIT structure rule \ - already read into the schema: %s. The later DIT structure rule definition \ + already read into the schema: %s. The later DIT structure rule definition \ will be used WARN_CONFIG_SCHEMA_CANNOT_PARSE_MRU_222=Unable to parse a matching \ - rule use definition from schema configuration file %s: %s + rule use definition from schema configuration file %s: %s WARN_CONFIG_SCHEMA_CONFLICTING_MRU_223=A matching rule use read from \ schema configuration file %s conflicts with another matching rule use already \ - read into the schema: %s. The later matching rule use definition will be \ + read into the schema: %s. The later matching rule use definition will be \ used ERR_CONFIG_ATTR_READ_ONLY_228=Configuration attribute %s is read-only \ and its values may not be altered ERR_CONFIG_PLUGIN_CANNOT_INITIALIZE_245=An error occurred while \ attempting to initialize an instance of class %s as a Directory Server plugin \ - using the information in configuration entry %s: %s. This plugin will be \ + using the information in configuration entry %s: %s. This plugin will be \ disabled ERR_CONFIG_EXTOP_INVALID_CLASS_256=Class %s specified in configuration \ entry %s does not contain a valid extended operation handler implementation: \ %s ERR_CONFIG_EXTOP_INITIALIZATION_FAILED_261=An error occurred while \ trying to initialize an instance of class %s as an extended operation handler \ - as defined in configuration entry %s: %s + as defined in configuration entry %s: %s ERR_CONFIG_SASL_INITIALIZATION_FAILED_277=An error occurred while trying \ to initialize an instance of class %s as a SASL mechanism handler as defined \ - in configuration entry %s: %s + in configuration entry %s: %s ERR_CONFIG_FILE_ADD_ALREADY_EXISTS_280=Entry %s cannot be added to the \ Directory Server configuration because another configuration entry already \ exists with that DN @@ -384,7 +384,7 @@ registered with the parent entry %s rejected this change with the message: \ %s ERR_CONFIG_FILE_ADD_FAILED_284=An unexpected error occurred while \ - attempting to add configuration entry %s as a child of entry %s: %s + attempting to add configuration entry %s as a child of entry %s: %s ERR_CONFIG_FILE_DELETE_NO_SUCH_ENTRY_285=Entry %s cannot be removed from \ the Directory Server configuration because the specified entry does not exist ERR_CONFIG_FILE_DELETE_HAS_CHILDREN_286=Entry %s cannot be removed from \ @@ -395,14 +395,14 @@ removing the configuration root entry is not allowed ERR_CONFIG_FILE_DELETE_REJECTED_288=Entry %s cannot be removed from the \ Directory Server configuration because one of the delete listeners registered \ - with the parent entry %s rejected this change with the message: %s + with the parent entry %s rejected this change with the message: %s ERR_CONFIG_FILE_DELETE_FAILED_289=An unexpected error occurred while \ - attempting to remove configuration entry %s as a child of entry %s: %s + attempting to remove configuration entry %s as a child of entry %s: %s ERR_CONFIG_FILE_MODIFY_NO_SUCH_ENTRY_290=Entry %s cannot be modified \ because the specified entry does not exist ERR_CONFIG_FILE_MODIFY_REJECTED_BY_CHANGE_LISTENER_291=Entry %s cannot \ be modified because one of the configuration change listeners registered for \ - that entry rejected the change: %s + that entry rejected the change: %s ERR_CONFIG_FILE_SEARCH_NO_SUCH_BASE_293=The search operation cannot be \ processed because base entry %s does not exist ERR_CONFIG_FILE_SEARCH_INVALID_SCOPE_294=The search operation cannot be \ @@ -412,62 +412,62 @@ %s ERR_CONFIG_FILE_WRITE_CANNOT_RENAME_NEW_CONFIG_301=An error occurred \ while attempting to rename the new Directory Server configuration from file \ - %s to %s: %s + %s to %s: %s ERR_CONFIG_FILE_MODDN_NOT_ALLOWED_302=Modify DN operations are not \ allowed in the Directory Server configuration INFO_CONFIG_BACKEND_ATTR_DESCRIPTION_BASE_DNS_305=Set of base \ - DNs that should be used for this backend. It is up to the backend \ + DNs that should be used for this backend. It is up to the backend \ implementation as to whether changes to this attribute will automatically \ take effect INFO_CONFIG_KEYMANAGER_DESCRIPTION_ENABLED_313=Indicates whether the \ - Directory Server key manager provider should be enabled. A key manager \ + Directory Server key manager provider should be enabled. A key manager \ provider is required for operations that require access to a key manager \ - (e.g., communication over SSL). Changes to this configuration attribute will \ + (e.g., communication over SSL). Changes to this configuration attribute will \ take effect immediately, but will only impact future attempts to access the \ key manager ERR_CONFIG_TRUSTMANAGER_DESCRIPTION_ENABLED_328=Indicates whether the \ - Directory Server trust manager provider should be enabled. A trust manager \ + Directory Server trust manager provider should be enabled. A trust manager \ provider is required for operations that require access to a trust manager \ - (e.g., communication over SSL). Changes to this configuration attribute will \ + (e.g., communication over SSL). Changes to this configuration attribute will \ take effect immediately, but will only impact future attempts to access the \ trust manager ERR_CONFIG_PWSCHEME_INITIALIZATION_FAILED_376=An error occurred while \ trying to initialize an instance of class %s as a password storage scheme as \ - defined in configuration entry %s: %s + defined in configuration entry %s: %s ERR_CONFIG_PWSCHEME_EXISTS_377=Unable to add a new password storage \ scheme entry with DN %s because there is already a storage scheme registered \ with that DN INFO_CONFIG_BACKEND_ATTR_DESCRIPTION_BACKEND_ID_382=Unique \ - identifier for this backend. Changes to this configuration attribute will \ + identifier for this backend. Changes to this configuration attribute will \ not take effect until the backend is disabled and re-enabled or the server is \ restarted WARN_CONFIG_BACKEND_DUPLICATE_BACKEND_ID_384=The backend defined in \ configuration entry %s has a backend ID of %s that conflicts with the backend \ - ID for another backend in the server. The backend will be disabled + ID for another backend in the server. The backend will be disabled ERR_CONFIG_BACKUP_CANNOT_GET_MAC_386=An error occurred while \ attempting to obtain the %s MAC provider to create the signed hash for the \ - backup: %s + backup: %s ERR_CONFIG_BACKUP_CANNOT_GET_DIGEST_387=An error occurred while \ attempting to obtain the %s message digest to create the hash for the backup: \ %s ERR_CONFIG_BACKUP_CANNOT_CREATE_ARCHIVE_FILE_388=An error occurred \ - while trying to create the config archive file %s in directory %s: %s + while trying to create the config archive file %s in directory %s: %s ERR_CONFIG_BACKUP_CANNOT_GET_CIPHER_389=An error occurred while \ - attempting to obtain the cipher to use to encrypt the backup: %s + attempting to obtain the cipher to use to encrypt the backup: %s ERR_CONFIG_BACKUP_ZIP_COMMENT_390=%s config backup %s ERR_CONFIG_BACKUP_CANNOT_DETERMINE_CONFIG_FILE_LOCATION_391=An error \ occurred while attempting to determine the path to the Directory Server \ - configuration file so that it could be archived: %s + configuration file so that it could be archived: %s ERR_CONFIG_BACKUP_CANNOT_BACKUP_CONFIG_FILE_392=An error occurred \ - while attempting to back up configuration file %s: %s + while attempting to back up configuration file %s: %s ERR_CONFIG_BACKUP_CANNOT_BACKUP_ARCHIVED_CONFIGS_393=An error occurred \ while attempting to back up the archived previous configurations from file \ - %s: %s + %s: %s ERR_CONFIG_BACKUP_CANNOT_CLOSE_ZIP_STREAM_394=An error occurred while \ - trying to close the config archive file %s in directory %s: %s + trying to close the config archive file %s in directory %s: %s ERR_CONFIG_BACKUP_CANNOT_UPDATE_BACKUP_DESCRIPTOR_395=An error \ occurred while attempting to update the backup descriptor file %s with \ - information about the configuration backup: %s + information about the configuration backup: %s ERR_CONFIG_RESTORE_NO_SUCH_BACKUP_396=Unable to restore or verify \ configuration backup %s in directory %s because no such backup exists ERR_CONFIG_RESTORE_NO_BACKUP_FILE_397=Unable to restore or verify \ @@ -477,7 +477,7 @@ configuration backup %s because the specified archive file %s does not exist ERR_CONFIG_RESTORE_CANNOT_CHECK_FOR_ARCHIVE_399=Unable to restore or \ verify configuration backup %s because an error occurred while trying to \ - determine whether backup archive %s exists: %s + determine whether backup archive %s exists: %s ERR_CONFIG_RESTORE_UNKNOWN_DIGEST_400=Unable to restore or verify \ configuration backup %s because an unsigned hash of this backup is available \ but the server cannot determine the digest algorithm used to generate this \ @@ -493,41 +493,41 @@ unsupported MAC algorithm of %s ERR_CONFIG_RESTORE_CANNOT_OPEN_BACKUP_FILE_404=Unable to restore or \ verify configuration backup %s because an error occurred while attempting to \ - open the backup archive file %s: %s + open the backup archive file %s: %s ERR_CONFIG_RESTORE_CANNOT_GET_CIPHER_406=Unable to restore or verify \ configuration backup %s because it is encrypted using an unknown or \ - unsupported cipher: %s + unsupported cipher: %s ERR_CONFIG_RESTORE_CANNOT_BACKUP_EXISTING_CONFIG_407=Unable to restore \ configuration backup %s because an error occurred while attempting to \ - temporarily back up the current configuration files from %s to %s: %s + temporarily back up the current configuration files from %s to %s: %s NOTE_CONFIG_RESTORE_RESTORED_OLD_CONFIG_408=An error occurred that \ - prevented the configuration backup from being properly restored. However, \ + prevented the configuration backup from being properly restored. However, \ the original configuration files that were in place before the start of the \ restore process have been preserved and are now in their original location of \ %s ERR_CONFIG_RESTORE_CANNOT_RESTORE_OLD_CONFIG_409=An error occurred \ - that prevented the configuration backup from being properly restored. The \ + that prevented the configuration backup from being properly restored. The \ original configuration files that were in place before the start of the \ restore process have been preserved and are contained in the %s directory ERR_CONFIG_RESTORE_CANNOT_CREATE_CONFIG_DIRECTORY_410=Unable to \ restore configuration backup %s because an error occurred while attempting to \ - create a new empty directory %s into which the files should be restored: %s + create a new empty directory %s into which the files should be restored: %s ERR_CONFIG_RESTORE_OLD_CONFIG_SAVED_411=An error occurred that \ - prevented the configuration backup from being properly restored. The \ + prevented the configuration backup from being properly restored. The \ original configuration files that were in place before the start of the \ restore process have been preserved in the %s directory ERR_CONFIG_RESTORE_CANNOT_GET_ZIP_ENTRY_412=Unable to restore or \ verify configuration backup %s because an error occurred while trying to read \ - the next entry from the archive file %s: %s + the next entry from the archive file %s: %s ERR_CONFIG_RESTORE_CANNOT_CREATE_FILE_413=Unable to restore \ configuration backup %s because an error occurred while trying to recreate \ - file %s: %s + file %s: %s ERR_CONFIG_RESTORE_CANNOT_PROCESS_ARCHIVE_FILE_414=Unable to restore \ or verify configuration backup %s because an error occurred while processing \ - archived file %s: %s + archived file %s: %s ERR_CONFIG_RESTORE_ERROR_ON_ZIP_STREAM_CLOSE_415=Unable to restore or \ verify configuration backup %s because an unexpected error occurred while \ - trying to close the archive file %s: %s + trying to close the archive file %s: %s NOTE_CONFIG_RESTORE_UNSIGNED_HASH_VALID_416=The message digest calculated \ from the backup archive matches the digest stored with the backup information ERR_CONFIG_RESTORE_UNSIGNED_HASH_INVALID_417=Unable to restore or \ @@ -544,61 +544,61 @@ NOTE_CONFIG_RESTORE_SUCCESSFUL_421=Configuration backup %s was successfully \ restored from the archive in directory %s ERR_CONFIG_BACKEND_CANNOT_ACQUIRE_SHARED_LOCK_422=The Directory Server \ - was unable to acquire a shared lock for backend %s: %s. This generally \ + was unable to acquire a shared lock for backend %s: %s. This generally \ means that the backend is in use by a process that requires an exclusive lock \ - (e.g., importing from LDIF or restoring a backup). This backend will be \ + (e.g., importing from LDIF or restoring a backup). This backend will be \ disabled WARN_CONFIG_BACKEND_CANNOT_RELEASE_SHARED_LOCK_423=An error occurred \ - while attempting to release a shared lock for backend %s: %s. This may \ + while attempting to release a shared lock for backend %s: %s. This may \ interfere with operations that require exclusive access, including LDIF \ import and restoring a backup INFO_CONFIG_FILE_HEADER_424=This file contains the primary Directory Server \ - configuration. It must not be directly edited while the server is online. \ + configuration. It must not be directly edited while the server is online. \ The server configuration should only be managed using the administration \ utilities provided with the Directory Server ERR_CONFIG_IDMAPPER_INITIALIZATION_FAILED_442=An error occurred while \ trying to initialize an instance of class %s as an identity mapper as defined \ - in configuration entry %s: %s + in configuration entry %s: %s ERR_CONFIG_IDMAPPER_NO_PROXY_MAPPER_DN_448=The Directory Server does \ not have any identity mapper configured for use in conjunction with proxied \ - authorization V2 operations. The Directory Server will not be able to \ + authorization V2 operations. The Directory Server will not be able to \ process requests containing the proxied authorization control with a \ username-based authorization ID ERR_CONFIG_IDMAPPER_INVALID_PROXY_MAPPER_DN_449=The configured proxied \ authorization identity mapper DN %s does not refer to an active identity \ - mapper. The Directory Server will not be able to process requests containing \ + mapper. The Directory Server will not be able to process requests containing \ the proxied authorization control with a username-based authorization ID ERR_CONFIG_SYNCH_UNABLE_TO_LOAD_PROVIDER_CLASS_463=An error occurred \ while attempting to load class %s referenced in synchronization provider \ - configuration entry %s: %s + configuration entry %s: %s ERR_CONFIG_SYNCH_UNABLE_TO_INSTANTIATE_PROVIDER_464=An error occurred \ while attempting to instantiate class %s referenced in synchronization \ - provider configuration entry %s: %s + provider configuration entry %s: %s ERR_CONFIG_SYNCH_ERROR_INITIALIZING_PROVIDER_465=An error occurred \ while attempting to initialize the Directory Server synchronization provider \ - referenced in configuration entry %s: %s + referenced in configuration entry %s: %s ERR_CONFIG_PWVALIDATOR_INITIALIZATION_FAILED_489=An error occurred while \ trying to initialize an instance of class %s as a password validator as \ - defined in configuration entry %s: %s + defined in configuration entry %s: %s ERR_CONFIG_PWGENERATOR_INITIALIZATION_FAILED_505=An error occurred while \ trying to initialize an instance of class %s as a password generator as \ - defined in configuration entry %s: %s + defined in configuration entry %s: %s ERR_CONFIG_PWPOLICY_NO_POLICIES_514=No password policies have been \ defined below the cn=Password Policies,cn=config entry in the Directory \ - Server configuration. At least one password policy configuration must be \ + Server configuration. At least one password policy configuration must be \ defined ERR_CONFIG_PWPOLICY_INVALID_POLICY_CONFIG_515=The password policy \ - defined in configuration entry %s is invalid: %s + defined in configuration entry %s is invalid: %s ERR_CONFIG_PWPOLICY_MISSING_DEFAULT_POLICY_516=The Directory Server \ default password policy is defined as %s, but that entry does not exist or is \ not below the password policy configuration base cn=Password \ Policies,cn=config WARN_CONFIG_PWPOLICY_CANNOT_DELETE_DEFAULT_POLICY_517=The specified \ entry %s is currently defined as the configuration entry for the default \ - password policy. The default password policy configuration entry may not be \ + password policy. The default password policy configuration entry may not be \ removed INFO_CONFIG_PWPOLICY_REMOVED_POLICY_518=Password policy entry %s has been \ - removed from the Directory Server configuration. Any user entries that \ + removed from the Directory Server configuration. Any user entries that \ explicitly reference this password policy will no longer be allowed to \ authenticate WARN_CONFIG_AUTHZ_DISABLED_525=Access control has been disabled @@ -606,52 +606,52 @@ the %s implementation ERR_CONFIG_AUTHZ_UNABLE_TO_INSTANTIATE_HANDLER_533=An error occurred \ while attempting to instantiate class %s referenced in the access control \ - configuration entry %s: %s + configuration entry %s: %s INFO_CONFIG_ROOTDN_DESCRIPTION_ALTERNATE_BIND_DN_540=Specifies one or more \ alternate bind DNs that may be used to authenticate as the associated root \ DN, in addition to the actual DN of the root DN configuration entry. \ Alternate bind DNs must not conflict with the DNs of any other entries in the \ directory, nor can they conflict with other alternate bind DNs configured for \ - other root DNs. Changes to this configuration attribute will take effect \ + other root DNs. Changes to this configuration attribute will take effect \ immediately ERR_CONFIG_ROOTDN_CONFLICTING_MAPPING_541=Unable to register "%s" as \ an alternate bind DN for user "%s" because it is already registered as an \ alternate bind DN for root user "%s" ERR_CONFIG_ACCTNOTHANDLER_INITIALIZATION_FAILED_558=An error occurred \ while trying to initialize an instance of class %s as an account status \ - notification handler as defined in configuration entry %s: %s + notification handler as defined in configuration entry %s: %s ERR_CONFIG_ACCTNOTHANDLER_EXISTS_559=Unable to add a new account status \ notification handler entry with DN %s because there is already a notification \ handler registered with that DN ERR_CONFIG_UNABLE_TO_APPLY_STARTUP_CHANGES_563=An error occurred while \ attempting to apply the changes contained in file %s to the server \ - configuration at startup: %s + configuration at startup: %s ERR_CONFIG_ERROR_APPLYING_STARTUP_CHANGE_564=Unable to apply a change \ - at server startup: %s + at server startup: %s ERR_CONFIG_UNABLE_TO_APPLY_CHANGES_FILE_565=One or more errors occurred \ while applying changes on server startup ERR_CONFIG_BACKEND_MODE_INVALID_567=Configuration entry %s does not \ contain a valid value for configuration attribute ds-cfg-db-directory-permissions (It \ should be an UNIX permission mode in three-digit octal notation.) ERR_CONFIG_BACKEND_INSANE_MODE_568=Invalid UNIX file permissions %s \ - does not allow read and write access to the backend database directory by \ - the backend + does not allow read and write access to the backend database directory by \ + the backend ERR_CONFIG_PWPOLICY_NO_DEFAULT_POLICY_571=No default password policy \ - is configured for the Directory Server. The default password policy must be \ + is configured for the Directory Server. The default password policy must be \ specified by the ds-cfg-default-password-policy attribute in the cn=config \ entry WARN_CONFIG_BACKEND_CANNOT_REGISTER_BACKEND_572=An error occurred \ - while attempting to register backend %s with the Directory Server: %s + while attempting to register backend %s with the Directory Server: %s ERR_CONFIG_FILE_CANNOT_CREATE_ARCHIVE_DIR_NO_REASON_573=An error \ occurred while trying to create the configuration archive directory %s ERR_CONFIG_FILE_CANNOT_CREATE_ARCHIVE_DIR_574=An error occurred while \ - trying to create the configuration archive directory %s: %s + trying to create the configuration archive directory %s: %s ERR_CONFIG_FILE_CANNOT_WRITE_CONFIG_ARCHIVE_575=An error occurred \ while trying to write the current configuration to the configuration archive: \ %s ERR_CONFIG_GROUP_INITIALIZATION_FAILED_591=An error occurred while \ trying to initialize an instance of class %s as a group implementation as in \ - configuration entry %s: %s + configuration entry %s: %s ERR_CONFIG_FILE_ADD_INSUFFICIENT_PRIVILEGES_598=You do not have \ sufficient privileges to perform add operations in the Directory Server \ configuration @@ -671,34 +671,34 @@ sufficient privileges to change the set of default root privileges ERR_CONFIG_CERTMAPPER_INITIALIZATION_FAILED_614=An error occurred while \ trying to initialize an instance of class %s as a certificate mapper as \ - defined in configuration entry %s: %s + defined in configuration entry %s: %s ERR_CONFIG_KEYMANAGER_CANNOT_GET_BASE_617=An error occurred while \ attempting to retrieve the key manager provider base entry cn=Key Manager \ - Providers,cn=config from the Directory Server configuration: %s + Providers,cn=config from the Directory Server configuration: %s ERR_CONFIG_KEYMANAGER_INITIALIZATION_FAILED_627=An error occurred while \ trying to initialize an instance of class %s as a key manager provider as \ - defined in configuration entry %s: %s + defined in configuration entry %s: %s ERR_CONFIG_TRUSTMANAGER_CANNOT_GET_BASE_630=An error occurred while \ attempting to retrieve the trust manager provider base entry cn=Trust Manager \ - Providers,cn=config from the Directory Server configuration: %s + Providers,cn=config from the Directory Server configuration: %s ERR_CONFIG_TRUSTMANAGER_INITIALIZATION_FAILED_640=An error occurred \ while trying to initialize an instance of class %s as a trust manager \ - provider as defined in configuration entry %s: %s + provider as defined in configuration entry %s: %s ERR_CONFIG_JMX_CANNOT_GET_ATTRIBUTE_643=Unable to retrieve JMX \ - attribute %s associated with configuration entry %s: %s + attribute %s associated with configuration entry %s: %s ERR_CONFIG_CHANGE_NO_RESULT_645=%s.%s returned a result of null for \ entry %s -ERR_CONFIG_CHANGE_RESULT_ERROR_646=%s.%s failed for entry %s: result \ +ERR_CONFIG_CHANGE_RESULT_ERROR_646=%s.%s failed for entry %s: result \ code=%s, admin action required=%b, messages="%s" WARN_CONFIG_CHANGE_RESULT_ACTION_REQUIRED_647=%s.%s indicated that \ - administrative action is required for entry %s: messages="%s" + administrative action is required for entry %s: messages="%s" INFO_CONFIG_CHANGE_RESULT_MESSAGES_648=%s.%s succeeded but generated the \ - following messages for entry %s: %s + following messages for entry %s: %s ERR_CONFIG_VATTR_INVALID_SEARCH_FILTER_649=Unable to parse value "%s" \ - from config entry "%s" as a valid search filter: %s + from config entry "%s" as a valid search filter: %s ERR_CONFIG_VATTR_INITIALIZATION_FAILED_650=An error occurred while \ trying to load an instance of class %s referenced in configuration entry %s \ - as a virtual attribute provider: %s + as a virtual attribute provider: %s ERR_CONFIG_VATTR_SV_TYPE_WITH_MV_PROVIDER_651=The virtual attribute \ configuration in entry "%s" is not valid because attribute type %s is \ single-valued but provider %s may generate multiple values @@ -710,52 +710,52 @@ entry %s cannot be modified because the change would alter its structural \ object class ERR_CONFIG_CANNOT_CALCULATE_DIGEST_654=An error occurred while \ - attempting to calculate a SHA-1 digest of file %s: %s + attempting to calculate a SHA-1 digest of file %s: %s WARN_CONFIG_MANUAL_CHANGES_DETECTED_655=The Directory Server has \ detected that one or more external changes have been made to the \ configuration file %s while the server was online, but another change has \ - caused the server configuration to be overwritten. The manual changes have \ + caused the server configuration to be overwritten. The manual changes have \ not been applied, but they have been preserved in file %s ERR_CONFIG_MANUAL_CHANGES_LOST_656=The Directory Server encountered an \ error while attempting to determine whether the configuration file %s has \ been externally edited with the server online, and/or trying to preserve such \ - changes: %s. Any manual changes made to that file may have been lost + changes: %s. Any manual changes made to that file may have been lost ERR_CONFIG_ROTATION_POLICY_INVALID_CLASS_657=Class %s specified in \ attribute ds-cfg-java-class of configuration entry %s cannot be \ - instantiated as a Directory Server log rotation policy: %s + instantiated as a Directory Server log rotation policy: %s ERR_CONFIG_RETENTION_POLICY_INVALID_CLASS_658=Class %s specified in \ attribute ds-cfg-java-class of configuration entry %s cannot be \ - instantiated as a Directory Server log retention policy: %s + instantiated as a Directory Server log retention policy: %s ERR_CONFIG_ROTATION_POLICY_CANNOT_CREATE_POLICY_659=An error occurred \ while attempting to create a Directory Server log rotation policy from the \ - information in configuration entry %s: %s + information in configuration entry %s: %s ERR_CONFIG_RETENTION_POLICY_CANNOT_CREATE_POLICY_660=An error occurred \ while attempting to create a Directory Server log retention policy from the \ - information in configuration entry %s: %s + information in configuration entry %s: %s ERR_CONFIG_LOGGING_CANNOT_CREATE_WRITER_661=An error occurred while \ attempting to create a text writer for a Directory Server logger from the \ - information in configuration entry %s: %s + information in configuration entry %s: %s WARN_CONFIG_SCHEMA_MULTIPLE_ENTRIES_IN_FILE_662=Schema configuration \ - file %s in directory %s contains more than one entry. Only the first entry \ + file %s in directory %s contains more than one entry. Only the first entry \ will be examined, and the additional entries will be ignored WARN_CONFIG_SCHEMA_UNPARSEABLE_EXTRA_DATA_IN_FILE_663=Schema \ configuration file %s in directory %s contains additional data after the \ - schema entry that cannot be parsed by the LDIF reader: %s. The first entry \ + schema entry that cannot be parsed by the LDIF reader: %s. The first entry \ will be processed, but the remaining data will be ignored WARN_CONFIG_PLUGIN_EMPTY_ELEMENT_IN_ORDER_664=The plugin order \ - definition for plugins of type %s contains an empty element. This may cause \ + definition for plugins of type %s contains an empty element. This may cause \ the plugin order to be evaluated incorrectly WARN_CONFIG_PLUGIN_MULTIPLE_WILDCARDS_IN_ORDER_665=The plugin order \ - definition for plugins of type %s contains multiple wildcard characters. All \ + definition for plugins of type %s contains multiple wildcard characters. All \ plugin definitions should contain exactly one wildcard element to indicate \ where unmatched plugins should be included in the order, and including \ multiple wildcards may cause the plugin order to be evaluated incorrectly WARN_CONFIG_PLUGIN_LISTED_MULTIPLE_TIMES_666=The plugin order \ definition for plugins of type %s includes multiple references to the '%s' \ - plugin. This may cause the plugin order to be evaluated incorrectly + plugin. This may cause the plugin order to be evaluated incorrectly WARN_CONFIG_PLUGIN_ORDER_NO_WILDCARD_667=The plugin order definition \ for plugins of type %s does not include a wildcard element to indicate where \ - unmatched plugins should be included in the order. The server will default \ + unmatched plugins should be included in the order. The server will default \ to invoking all unnamed plugins after set of named plugins WARN_CONFIG_SCHEMA_CANNOT_DELETE_SYNTAX_IN_USE_668=Attribute syntax %s \ cannot be deleted from the server because it is in use by attribute type %s @@ -772,37 +772,37 @@ %s cannot be disabled because it is in use by matching rule use %s ERR_CONFIG_WORK_QUEUE_INITIALIZATION_FAILED_674=Unable to initialize \ an instance of class %s as a work queue as specified in configuration entry \ - %s: %s + %s: %s INFO_CONFIG_WORK_QUEUE_CLASS_CHANGE_REQUIRES_RESTART_675=The class used to \ provide the Directory Server work queue implementation has been changed from \ %s to %s, but this change will not take effect until the server is restarted ERR_CONFIG_FILE_ADD_APPLY_FAILED_676=The attempt to apply the \ - configuration add failed. The preliminary checks were all successful and the \ + configuration add failed. The preliminary checks were all successful and the \ entry was added to the server configuration, but at least one of the \ configuration add listeners reported an error when attempting to apply the \ - change: %s + change: %s ERR_CONFIG_FILE_DELETE_APPLY_FAILED_677=The attempt to apply the \ - configuration delete failed. The preliminary checks were all successful and \ + configuration delete failed. The preliminary checks were all successful and \ the entry was removed from the server configuration, but at least one of the \ configuration delete listeners reported an error when attempting to apply the \ - change: %s + change: %s ERR_CONFIG_FILE_MODIFY_APPLY_FAILED_678=The attempt to apply the \ - configuration modification failed. The preliminary checks were all \ + configuration modification failed. The preliminary checks were all \ successful and the modified entry was written to the server configuration, \ but at least one of the configuration change listeners reported an error when \ - attempting to apply the change: %s + attempting to apply the change: %s ERR_CONFIG_KEYMANAGER_CONFIG_NOT_ACCEPTABLE_679=The configuration for \ the key manager provider defined in configuration entry %s was not \ - acceptable: %s + acceptable: %s ERR_CONFIG_TRUSTMANAGER_CONFIG_NOT_ACCEPTABLE_680=The configuration for \ the trust manager provider defined in configuration entry %s was not \ - acceptable: %s + acceptable: %s ERR_CONFIG_AUTHZ_CONFIG_NOT_ACCEPTABLE_681=The configuration for the \ trust manager provider defined in configuration entry %s was not acceptable: \ %s ERR_CONFIG_ACCTNOTHANDLER_CONFIG_NOT_ACCEPTABLE_682=The configuration \ for the account status notification handler defined in configuration entry %s \ - was not acceptable: %s + was not acceptable: %s ERR_CONFIG_SCHEMA_SYNTAX_CONFIG_NOT_ACCEPTABLE_683=The configuration for \ the attribute syntax defined in configuration entry %s was not acceptable: \ %s @@ -813,9 +813,9 @@ group implementation defined in configuration entry %s was not acceptable: \ %s ERR_CONFIG_IDMAPPER_CONFIG_NOT_ACCEPTABLE_687=The configuration for the \ - identity mapper defined in configuration entry %s was not acceptable: %s + identity mapper defined in configuration entry %s was not acceptable: %s ERR_CONFIG_SCHEMA_MR_CONFIG_NOT_ACCEPTABLE_688=The configuration for the \ - matching rule defined in configuration entry %s was not acceptable: %s + matching rule defined in configuration entry %s was not acceptable: %s ERR_CONFIG_PWGENERATOR_CONFIG_NOT_ACCEPTABLE_689=The configuration for \ the password generator defined in configuration entry %s was not acceptable: \ %s @@ -826,40 +826,40 @@ the password validator defined in configuration entry %s was not acceptable: \ %s ERR_CONFIG_PLUGIN_CONFIG_NOT_ACCEPTABLE_692=The configuration for the \ - plugin defined in configuration entry %s was not acceptable: %s + plugin defined in configuration entry %s was not acceptable: %s ERR_CONFIG_SASL_CONFIG_NOT_ACCEPTABLE_693=The configuration for the SASL \ - mechanism handler defined in configuration entry %s was not acceptable: %s + mechanism handler defined in configuration entry %s was not acceptable: %s ERR_CONFIG_VATTR_CONFIG_NOT_ACCEPTABLE_694=The configuration for the \ virtual attribute provider defined in configuration entry %s was not \ - acceptable: %s + acceptable: %s ERR_CONFIG_ALERTHANDLER_CONFIG_NOT_ACCEPTABLE_695=The configuration for \ - the alert handler defined in configuration entry %s was not acceptable: %s + the alert handler defined in configuration entry %s was not acceptable: %s ERR_CONFIG_ALERTHANDLER_INITIALIZATION_FAILED_696=An error occurred \ while trying to initialize an instance of class %s as an alert handler as \ - defined in configuration entry %s: %s + defined in configuration entry %s: %s ERR_CONFIG_CORE_INVALID_SMTP_SERVER_697=The provided SMTP server value \ - '%s' is invalid. An SMTP server value must have an IP address or a \ + '%s' is invalid. An SMTP server value must have an IP address or a \ resolvable name, and it may optionally be followed by a colon and an integer \ value between 1 and 65535 to specify the server port number ERR_STARTOK_CANNOT_OPEN_FOR_READING_698=An error occurred while \ attempting to open the current configuration file %s for reading in order to \ - copy it to the ".startok" file: %s + copy it to the ".startok" file: %s ERR_STARTOK_CANNOT_OPEN_FOR_WRITING_699=An error occurred while \ attempting to open file %s in order to write the ".startok" configuration \ - file: %s + file: %s ERR_STARTOK_CANNOT_WRITE_700=An error occurred while attempting to \ copy the current configuration from file %s into temporary file %s for use \ - as the ".startok" configuration file: %s + as the ".startok" configuration file: %s ERR_STARTOK_CANNOT_RENAME_701=An error occurred while attempting to \ - rename file %s to %s for use as the ".startok" configuration file: %s + rename file %s to %s for use as the ".startok" configuration file: %s NOTE_CONFIG_FILE_USING_STARTOK_FILE_702=The Directory Server is starting \ using the last known good configuration file %s rather than the active \ configuration file %s WARN_CONFIG_FILE_NO_STARTOK_FILE_703=No last known good configuration \ - file %s exists. The server will attempt to start using the active \ + file %s exists. The server will attempt to start using the active \ configuration file %s ERR_CONFIG_JE_PROPERTY_INVALID_704=An error occurred while \ - trying to parse and validate Berkeley DB JE property %s: %s + trying to parse and validate Berkeley DB JE property %s: %s ERR_CONFIG_JE_PROPERTY_INVALID_FORM_705=An error occurred while \ trying to parse and validate Berkeley DB JE property %s: the property \ does not follow a singular property=value form @@ -872,19 +872,19 @@ INFO_CONFIG_JE_PROPERTY_REQUIRES_RESTART_708=Setting Berkeley DB JE property \ %s will not take effect until the component for which it is set is restarted ERR_CONFIG_LOGGING_CANNOT_OPEN_FILE_709=An error occurred while \ - attempting to open the configured log file %s for logger %s: %s + attempting to open the configured log file %s for logger %s: %s ERR_CONFIG_WORKFLOW_ELEMENT_CONFIG_NOT_ACCEPTABLE_710=The configuration \ for the workflow element defined in configuration entry %s was not \ acceptable: %s ERR_CONFIG_WORKFLOW_ELEMENT_CANNOT_INITIALIZE_711=An error occurred \ while trying to initialize a workflow element from class %s with the \ - information in configuration entry %s: %s. This workflow element will be \ + information in configuration entry %s: %s. This workflow element will be \ disabled ERR_CONFIG_WORKFLOW_CANNOT_CONFIGURE_MANUAL_713=An error occurred \ while trying to configure in manual mode the workflows in the \ Directory Server, and rollback to automatic configuration mode has failed \ too. If the server is in an unstab\ - le state restart it with the last \ + le state restart it with the last \ valid configuration ERR_CONFIG_WORKFLOW_CANNOT_CONFIGURE_AUTO_714=An error occurred \ while trying to configure in automatic mode the workflows in the \ @@ -892,14 +892,14 @@ too. If the server is in an unstable state restart it with the last \ valid configuration ERR_CONFIG_LOGGING_INSANE_MODE_715=Invalid UNIX file permissions %s \ - does not allow write access to the log file by the log publisher + does not allow write access to the log file by the log publisher ERR_CONFIG_LOGGING_MODE_INVALID_716=Invalid UNIX file permissions %s: %s ERR_CONFIG_EXTENSION_CONFIG_NOT_ACCEPTABLE_717=The configuration for \ the extension defined in configuration entry %s was not \ - acceptable: %s + acceptable: %s ERR_CONFIG_EXTENSION_INITIALIZATION_FAILED_718=An error occurred while \ trying to initialize an instance of class %s as an extension as \ - defined in configuration entry %s: %s + defined in configuration entry %s: %s ERR_CONFIG_NETWORKGROUPREQUESTFILTERINGPOLICY_INVALID_ATTRIBUTE_719=The \ allowed attribute %s specified in configuration entry %s is also defined as \ a prohibited attribute @@ -907,15 +907,15 @@ allowed subtree %s specified in configuration entry %s is also defined as \ a prohibited subtree ERR_CONFIG_NETWORK_GROUP_CONFIG_NOT_ACCEPTABLE_721=The configuration \ - for the network group defined in configuration entry %s was not acceptable: %s + for the network group defined in configuration entry %s was not acceptable: %s ERR_CONFIG_NETWORK_GROUP_POLICY_CANNOT_INITIALIZE_722=An error occurred \ while trying to initialize a network group policy loaded from class %s with \ - the information in configuration entry %s: %s + the information in configuration entry %s: %s WARN_CONFIG_SCHEMA_CANNOT_PARSE_LDAP_SYNTAX_723=An ldapSyntaxes \ - attribute read from schema configuration file %s could not be parsed: %s + attribute read from schema configuration file %s could not be parsed: %s WARN_CONFIG_SCHEMA_CONFLICTING_LDAP_SYNTAX_724=An ldap syntax read \ from schema configuration file %s conflicts with another ldap syntax already \ - read into the schema: %s. The later ldap syntax description will be used + read into the schema: %s. The later ldap syntax description will be used ERR_CONFIG_PWPOLICY_DEFAULT_POLICY_IS_WRONG_TYPE_726=The configuration \ entry '%s' is currently defined to be the default password policy, however it \ is not a password policy @@ -923,7 +923,7 @@ default password policy value '%s' is invalid because it refers to an \ authentication policy which is not a password policy ERR_CONFIG_LOGGING_INVALID_TIME_FORMAT_728=The timestamp format string \ - "%s" is not a valid format string. The format string should conform to the \ + "%s" is not a valid format string. The format string should conform to the \ syntax described in the documentation for the "java.text.SimpleDateFormat" class ERR_CONFIG_LOGGING_INVALID_USER_DN_PATTERN_729=The access log filtering \ criteria defined in "%s" could not be parsed because it contains an invalid \ @@ -932,11 +932,11 @@ criteria defined in "%s" could not be parsed because it contains an invalid \ target DN pattern "%s" WARN_CONFIG_LOGGER_NO_ACTIVE_HTTP_ACCESS_LOGGERS_731=There are no active \ - HTTP access loggers defined in the Directory Server configuration. No HTTP \ + HTTP access loggers defined in the Directory Server configuration. No HTTP \ access logging will be performed ERR_CONFIG_LOGGER_INVALID_HTTP_ACCESS_LOGGER_CLASS_732=Class %s specified \ in attribute ds-cfg-java-class of configuration entry %s cannot be \ - instantiated as a Directory Server HTTP access logger: %s + instantiated as a Directory Server HTTP access logger: %s ERR_CONFIG_LOGGING_EMPTY_LOG_FORMAT_733=The log format for configuration \ entry %s is empty. No information will be logged even if logging is activated WARN_CONFIG_LOGGING_UNSUPPORTED_FIELDS_IN_LOG_FORMAT_734=The log format \ -- Gitblit v1.10.0