# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License, Version 1.0 only
# (the "License"). You may not use this file except in compliance
# with the License.
#
# You can obtain a copy of the license at legal-notices/CDDLv1_0.txt
# or http://forgerock.org/license/CDDLv1.0.html.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at legal-notices/CDDLv1_0.txt.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information:
# Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
# Copyright 2006-2010 Sun Microsystems, Inc.
# Portions Copyright 2011-2015 ForgeRock AS.
#
# Format string definitions
#
# Keys must be formatted as follows:
#
# [SEVERITY]_[DESCRIPTION]_[ORDINAL]
#
# where:
#
# SEVERITY is one of:
# [ERR, WARN, NOTICE, INFO, DEBUG]
#
# DESCRIPTION is an upper case string providing a hint as to the context of
# the message in upper case with the underscore ('_') character serving as
# word separator
#
# ORDINAL is an integer unique among other ordinals in this file
#
ERR_DSCFG_ERROR_CANNOT_READ_CONNECTION_PARAMETERS_1=The connection \
parameters could not be read due to the following error: %s
ERR_DSCFG_ERROR_LDAP_SIMPLE_BIND_FAILED_2=Unable to authenticate to \
the server as "%s"
ERR_DSCFG_ERROR_LDAP_FAILED_TO_CONNECT_3=Unable to connect to the \
server at "%s" on port %s
ERR_DSCFG_ERROR_LDAP_SIMPLE_BIND_NOT_SUPPORTED_4=Unable to \
authenticate using simple authentication
INFO_DSCFG_DESCRIPTION_SUBCMD_CREATE_5=Creates %s
INFO_DSCFG_DESCRIPTION_SUBCMD_DELETE_6=Deletes %s
INFO_DSCFG_DESCRIPTION_SUBCMD_LIST_7=Lists existing %s
INFO_DSCFG_DESCRIPTION_SUBCMD_GETPROP_8=Shows %s properties
INFO_DSCFG_DESCRIPTION_SUBCMD_SETPROP_9=Modifies %s properties
ERR_DSCFG_ERROR_MISSING_SUBCOMMAND_10=A sub-command must be \
specified
INFO_DSCFG_DESCRIPTION_TYPE_11=The type of %s which should be created. The \
value for TYPE can be one of: %s
ERR_DSCFG_ERROR_NO_PASSWORD_12=No password was specified for \
administrator "%s"
ERR_DSCFG_ERROR_PROPERTY_UNRECOGNIZED_13=The property "%s" is not a \
recognized property of %s
ERR_DSCFG_ERROR_PROPERTY_INVALID_VALUE_14=The value "%s" is not a \
valid value for the %s property "%s" which has the following syntax: %s
ERR_DSCFG_ERROR_PROPERTY_READ_ONLY_15=The %s property "%s" is \
read-only and cannot be modified
ERR_DSCFG_ERROR_PROPERTY_MANDATORY_16=The %s property "%s" is \
mandatory and must be specified
ERR_DSCFG_ERROR_PROPERTY_SINGLE_VALUED_17=It is not possible to \
specify multiple values for the %s property "%s" as it is single-valued
INFO_DSCFG_DESCRIPTION_SUBCMD_HELPPROP_18=Describes managed objects and \
their properties
INFO_DSCFG_HEADING_COMPONENT_NAME_19=Component
INFO_DSCFG_HEADING_PROPERTY_NAME_20=Property
INFO_DSCFG_HEADING_PROPERTY_VALUE_21=Value(s)
INFO_DSCFG_HEADING_PROPERTY_SYNTAX_22=Syntax
INFO_DSCFG_HEADING_PROPERTY_OPTIONS_23=Options
INFO_DSCFG_DESCRIPTION_PROPERTY_SYNTAX_HELP_24=See detailed help
ERR_DSCFG_ERROR_GET_PARENT_DDE_25=The parent %s could not be \
retrieved because its type could not be determined. This is probably due to \
the %s having an invalid LDAP entry. Check that the %s has the correct object \
classes
ERR_DSCFG_ERROR_GET_PARENT_MODE_26=The parent %s could not be \
retrieved because of the reasons listed below:
ERR_DSCFG_ERROR_GET_PARENT_MONFE_27=The parent %s does not exist
ERR_DSCFG_ERROR_CREATE_MOAEE_28=The %s could not be created because \
there is already an existing one with the same name
ERR_DSCFG_ERROR_CREATE_AUTHZ_29=The %s could not be created because \
you do not have the correct authorization
ERR_DSCFG_ERROR_CREATE_CE_30=The %s could not be created due to a \
communications problem: %s
ERR_DSCFG_ERROR_CREATE_CME_31=The %s could not be created because \
another client is currently making conflicting configuration changes
ERR_DSCFG_ERROR_DELETE_MONFE_32=The %s could not be deleted because \
it does not exist
ERR_DSCFG_ERROR_DELETE_AUTHZ_33=The %s could not be deleted because \
you do not have the correct authorization
ERR_DSCFG_ERROR_DELETE_CE_34=The %s could not be deleted due to a \
communications problem: %s
ERR_DSCFG_ERROR_DELETE_CME_35=The %s could not be deleted because \
another client is currently making conflicting configuration changes
ERR_DSCFG_ERROR_GET_CHILD_DDE_36=The %s could not be retrieved \
because its type could not be determined. This is probably due to the %s \
having an invalid LDAP entry. Check that the %s object classes are correct
ERR_DSCFG_ERROR_GET_CHILD_MODE_37=The %s could not be retrieved \
because of the reasons listed below:
ERR_DSCFG_ERROR_GET_CHILD_MONFE_38=The %s does not exist
ERR_DSCFG_ERROR_GET_CHILD_AUTHZ_39=The %s could not be accessed \
because you do not have the correct authorization
ERR_DSCFG_ERROR_GET_CHILD_CE_40=The %s could not be accessed due to \
a communications problem: %s
ERR_DSCFG_ERROR_GET_CHILD_CME_41=The %s could not be accessed \
because another client is currently making conflicting configuration changes
ERR_DSCFG_ERROR_MODIFY_AUTHZ_42=The %s could not be modified because \
you do not have the correct authorization
ERR_DSCFG_ERROR_MODIFY_CE_43=The %s could not be modified due to a \
communications problem: %s
ERR_DSCFG_ERROR_MODIFY_CME_44=The %s could not be modified because \
another client is currently making conflicting configuration changes
ERR_DSCFG_ERROR_LIST_DDE_45=The %s could not be retrieved because \
its type could not be determined. This is probably due to the %s having an \
invalid LDAP entry. Check that the %s object classes are correct
ERR_DSCFG_ERROR_LIST_MODE_46=The %s could not be retrieved because \
of the reasons listed below:
ERR_DSCFG_ERROR_LIST_MONFE_47=The %s does not exist
ERR_DSCFG_ERROR_LIST_AUTHZ_48=The %s could not be listed because you \
do not have the correct authorization
ERR_DSCFG_ERROR_LIST_CE_49=The %s could not be listed due to a \
communications problem: %s
ERR_DSCFG_ERROR_LIST_CME_50=The %s could not be listed because \
another client is currently making conflicting configuration changes
ERR_DSCFG_ERROR_PROPERTY_UNKNOWN_ERROR_51=The value(s) of the %s \
property "%s" could not be determined due to an unknown error: %s
ERR_DSCFG_ERROR_PROPERTY_DEFAULT_BEHAVIOR_52=The default value(s) of \
the %s property "%s" could not be determined due to the following reason: %s
ERR_DSCFG_ERROR_NO_SEPARATOR_IN_PROPERTY_VALUE_53=The property \
argument "%s" does not contain a name/value separator. The argument should \
have the following syntax: property:value
ERR_DSCFG_ERROR_NO_NAME_IN_PROPERTY_VALUE_54=The property argument \
"%s" does not contain a property name. The argument should have the following \
syntax: property:value
ERR_DSCFG_ERROR_NO_VALUE_IN_PROPERTY_VALUE_55=The property argument \
"%s" does not contain a property value. The argument should have the \
following syntax: property:value
ERR_DSCFG_ERROR_SUB_TYPE_UNRECOGNIZED_56=The sub-type "%s" is not a \
recognized type of %s. It should be one of: %s
ERR_DSCFG_ERROR_NO_SEPARATOR_IN_PROPERTY_MOD_57=The property \
modification "%s" does not contain a name/value separator. The argument \
should have the following syntax: property[+|-]:value
ERR_DSCFG_ERROR_NO_NAME_IN_PROPERTY_MOD_58=The property modification \
"%s" does not contain a property name. The argument should have the following \
syntax: property[+|-]:value
ERR_DSCFG_ERROR_INCOMPATIBLE_PROPERTY_MOD_59=The property \
modification "%s" is incompatible with another modification to the same \
property
INFO_DSCFG_DESCRIPTION_TYPE_DEFAULT_60=The type of %s which should be \
created (Default: %s). The value for TYPE can be one of: %s
INFO_DSCFG_DESCRIPTION_RECORD_61=Modifies the display output to show one \
property value per line
INFO_DSCFG_DESCRIPTION_UNIT_TIME_62=Display time data using the specified \
unit. The value for UNIT can be one of ms, s, m, h, d, or w (milliseconds, \
seconds, minutes, hours, days, or weeks)
INFO_DSCFG_DESCRIPTION_UNIT_SIZE_63=Display size data using the specified \
unit. The value for UNIT can be one of b, kb, mb, gb, or tb (bytes, \
kilobytes, megabytes, gigabytes, or terabytes)
INFO_DSCFG_ERROR_TIME_UNIT_UNRECOGNIZED_64=The time unit "%s" is invalid. \
The valid time units are ms, s, m, h, d, or w (milliseconds, seconds, \
minutes, hours, days, or weeks)
INFO_DSCFG_ERROR_SIZE_UNIT_UNRECOGNIZED_65=The size unit "%s" is invalid. \
The valid size units are b, kb, mb, gb, or tb (bytes, kilobytes, megabytes, \
gigabytes, or terabytes)
INFO_DSCFG_HEADING_COMPONENT_TYPE_66=Type
INFO_DSCFG_DESCRIPTION_SHOW_GROUP_USAGE_67=Display subcommands relating to \
%s
INFO_DSCFG_DESCRIPTION_SHOW_GROUP_USAGE_ALL_68=Display all subcommands
INFO_DSCFG_DESCRIPTION_SHOW_GROUP_USAGE_SUMMARY_69=Display summary usage \
information
INFO_DSCFG_DESCRIPTION_NAME_70=The name of the %s
INFO_DSCFG_DESCRIPTION_PROP_71=The name of a property to be displayed
INFO_DSCFG_DESCRIPTION_PROP_VAL_72=Assigns a value to a property where PROP \
is the name of the property and VALUE is the single value to be assigned. \
Specify the same property multiple times in order to assign more than one \
value to it
INFO_DSCFG_DESCRIPTION_ADD_PROP_VAL_73=Adds a single value to a property \
where PROP is the name of the property and VALUE is the single value to be \
added
INFO_DSCFG_DESCRIPTION_REMOVE_PROP_VAL_74=Removes a single value from a \
property where PROP is the name of the property and VALUE is the single value \
to be removed
INFO_DSCFG_DESCRIPTION_RESET_PROP_75=Resets a property back to its default \
values where PROP is the name of the property to be reset
INFO_DSCFG_DESCRIPTION_HELP_TYPE_76=The type of components whose properties \
should be described. The value for TYPE must be one of the component types \
associated with the CATEGORY specified using the "--category" option
ERR_DSCFG_ERROR_BIND_PASSWORD_NONINTERACTIVE_77=The LDAP bind \
password was not specified and cannot be read interactively
INFO_DSCFG_DESCRIPTION_FORCE_1196=Ignore non-existent %s
ERR_DSCFG_ERROR_UNABLE_TO_RESET_MANDATORY_PROPERTY_78=The %s \
property "%s" is mandatory cannot be reset. Use the "%s" option to specify a \
new value
ERR_DSCFG_ERROR_UNABLE_TO_RESET_PROPERTY_WITH_VALUE_79="--%s %s" : \
the argument "--%s" \
reset the property to the default value. It cannot be used to set a property \
to a given value
ERR_DSCFG_ERROR_ILLEGAL_NAME_SYNTAX_80=The name "%s" is not a valid \
name for the %s which has the following syntax: %s
ERR_DSCFG_ERROR_ILLEGAL_NAME_EMPTY_81=Empty names are not permitted \
for %s
ERR_DSCFG_ERROR_ILLEGAL_NAME_BLANK_82=Blank names are not permitted \
for %s
ERR_DSCFG_ERROR_ILLEGAL_NAME_UNKNOWN_83=The name "%s" is not a valid \
name for the %s
INFO_DSCFG_DESCRIPTION_NAME_CREATE_84=The name of the new %s
INFO_DSCFG_DESCRIPTION_NAME_CREATE_EXT_85=The name of the new %s which will \
also be used as the value of the "%s" property: %s
ERR_DSCFG_ERROR_UNABLE_TO_SET_NAMING_PROPERTY_86=The property "%s" \
cannot be set as it is defined implicitly by the name of the %s
INFO_DSCFG_DESCRIPTION_ADVANCED_87=Allows the configuration of advanced \
components and properties
ERR_DSCFG_ERROR_MISSING_NON_INTERACTIVE_ARG_88=The argument "--%s" \
must be specified when this application is used non-interactively
INFO_DSCFG_CREATE_TYPE_PROMPT_89=>>>> Select the type of %s that you want to \
create:
INFO_DSCFG_CREATE_NAME_PROMPT_90=>>>> Enter a name for the %s that you want to \
create:
ERR_DSCFG_ERROR_CREATE_NAME_ALREADY_EXISTS_91=There is already \
another %s with the name "%s"
INFO_DSCFG_DESCRIPTION_CREATE_HELP_HEADING_TYPE_92=Type
INFO_DSCFG_DESCRIPTION_CREATE_HELP_HEADING_DESCR_93=Description
ERR_DSCFG_ERROR_FINDER_NO_CHILDREN_94=Unable to continue since there \
are no %s currently configured on the server
INFO_DSCFG_FINDER_PROMPT_SINGLE_95=>>>> There is only one %s: "%s". Are you sure \
that this is the correct one?
INFO_DSCFG_FINDER_PROMPT_MANY_96=>>>> Select the %s from the following list:
ERR_DSCFG_ERROR_FINDER_NO_CHILDREN_NULL_97=Unable to continue since there \
is no such an object currently configured on the server
INFO_DSCFG_HELP_FIELD_ENUM_98=one of the following values:
INFO_DSCFG_HELP_FIELD_UNDEFINED_99=undefined
INFO_DSCFG_HELP_FIELD_INHERITED_ABS_100=inherits from the property "%s" in \
the %s
INFO_DSCFG_HELP_FIELD_INHERITED_PARENT_101=inherits from the property "%s" \
in the parent %s
INFO_DSCFG_HELP_FIELD_INHERITED_THIS_102=inherits from the property "%s" in \
this %s
INFO_DSCFG_HELP_FIELD_SERVER_RESTART_103=The server must be restarted in \
order for changes to this property to take effect
INFO_DSCFG_HELP_FIELD_COMPONENT_RESTART_104=The %s must be restarted in \
order for changes to this property to take effect
INFO_DSCFG_HELP_FIELD_READ_ONLY_105=read-only - this property can only be \
specified when the %s is created
INFO_DSCFG_HELP_FIELD_MONITORING_106=monitoring - this property is \
automatically generated by the server
INFO_DSCFG_HELP_HEADING_PROPERTY_107=Property: %s
INFO_DSCFG_HELP_HEADING_COMPONENT_108=Component name: %s
INFO_DSCFG_HELP_HEADING_DEFAULT_109=Default behavior
INFO_DSCFG_HELP_HEADING_MANDATORY_110=Mandatory
INFO_DSCFG_HELP_HEADING_ADVANCED_111=Advanced
INFO_DSCFG_HELP_HEADING_MULTI_VALUED_112=Multi-valued
INFO_DSCFG_HELP_HEADING_READ_ONLY_113=Read-only
INFO_DSCFG_HELP_HEADING_SYNTAX_114=Syntax
INFO_DSCFG_HELP_DESCRIPTION_OPTION_115=Option Types:
INFO_DSCFG_HELP_DESCRIPTION_READ_116=Property value(s) are readable
INFO_DSCFG_HELP_DESCRIPTION_WRITE_117=Property value(s) are writable
INFO_DSCFG_HELP_DESCRIPTION_MANDATORY_118=The property is mandatory
INFO_DSCFG_HELP_DESCRIPTION_SINGLE_VALUED_119=The property is single-valued
INFO_DSCFG_HELP_DESCRIPTION_ADMIN_ACTION_120=Administrative action is \
required for changes to take effect
INFO_DSCFG_CONFIRM_CREATE_121=Are you sure that you want to create the %s?
INFO_DSCFG_CONFIRM_DELETE_122=Are you sure that you want to delete the %s?
INFO_DSCFG_CONFIRM_MODIFY_123=Are you sure that you want to modify the %s?
INFO_DSCFG_CONFIRM_CREATE_SUCCESS_124=The %s was created successfully
INFO_DSCFG_CONFIRM_DELETE_SUCCESS_125=The %s was deleted successfully
INFO_DSCFG_CONFIRM_MODIFY_SUCCESS_126=The %s was modified successfully
INFO_DSCFG_CONFIRM_CREATE_FAIL_127=The %s was not created
INFO_DSCFG_CONFIRM_DELETE_FAIL_128=The %s was not deleted
INFO_DSCFG_CONFIRM_MODIFY_FAIL_129=The %s was not modified
INFO_DSCFG_DESCRIPTION_HELP_CATEGORY_130=The category of components whose \
properties should be described
ERR_DSCFG_ERROR_CATEGORY_UNRECOGNIZED_131="%s" is not a recognized \
component category
ERR_DSCFG_ERROR_CATEGORY_TYPE_UNRECOGNIZED_132="%s" is not a \
recognized component type in category "%s"
ERR_DSCFG_ERROR_PROPERTY_UNRECOGNIZED_NO_DEFN_133=The property "%s" \
is not a recognized property
INFO_DSCFG_DESCRIPTION_HELP_INHERITED_134=Modifies the display output to \
show the inherited properties of components
INFO_VALUE_TRUE_135=true
INFO_VALUE_FALSE_136=false
INFO_VALUE_UNLIMITED_137=unlimited
INFO_EDITOR_PROMPT_SELECT_VALUE_SINGLE_138=Select a value for the "%s" property:
INFO_EDITOR_PROMPT_SELECT_VALUE_MULTI_139=Select one or more values for the "%s" property:
INFO_EDITOR_HEADING_SYNTAX_140=Syntax:
INFO_EDITOR_HEADING_VALUES_SUMMARY_141=The "%s" property has the following values:
INFO_EDITOR_PROMPT_SELECT_VALUES_ADD_142=Select the values you wish to add:
INFO_EDITOR_PROMPT_SELECT_VALUES_REMOVE_143=Select the values you wish to remove:
INFO_EDITOR_PROMPT_MODIFY_MENU_144=Do you want to modify the "%s" property?
INFO_EDITOR_OPTION_ADD_ALL_VALUES_145=Add all values
INFO_EDITOR_OPTION_ADD_ONE_OR_MORE_VALUES_146=Add one or more values
INFO_EDITOR_OPTION_REMOVE_ONE_OR_MORE_VALUES_147=Remove one or more values
INFO_EDITOR_OPTION_REMOVE_ALL_VALUES_148=Remove all values
INFO_EDITOR_OPTION_REVERT_CHANGES_149=Revert changes
INFO_EDITOR_OPTION_LEAVE_UNDEFINED_150=Leave undefined
INFO_EDITOR_OPTION_USE_DEFAULT_ALIAS_151=Use the default behavior: %s
INFO_EDITOR_OPTION_USE_DEFAULT_INHERITED_ALIAS_152=Use the inherited default behavior: %s
INFO_EDITOR_OPTION_USE_DEFAULT_INHERITED_ALIAS_UNDEFINED_153=Use the inherited default behavior: undefined
INFO_EDITOR_OPTION_USE_VALUE_154=Use the value: %s
INFO_EDITOR_OPTION_USE_DEFAULT_VALUE_155=Use the default value: %s
INFO_EDITOR_OPTION_USE_INHERITED_DEFAULT_VALUE_156=Use the inherited default value: %s
INFO_EDITOR_OPTION_USE_VALUES_157=Use these values
INFO_EDITOR_OPTION_USE_DEFAULT_VALUES_158=Use these default values
INFO_EDITOR_OPTION_USE_INHERITED_DEFAULT_VALUES_159=Use these inherited default values
INFO_EDITOR_OPTION_KEEP_DEFAULT_ALIAS_160=Keep the default behavior: %s
INFO_EDITOR_OPTION_KEEP_DEFAULT_INHERITED_ALIAS_161=Keep the inherited default behavior: %s
INFO_EDITOR_OPTION_KEEP_DEFAULT_INHERITED_ALIAS_UNDEFINED_162=Keep the inherited default behavior: undefined
INFO_EDITOR_OPTION_KEEP_VALUE_163=Keep the value: %s
INFO_EDITOR_OPTION_KEEP_DEFAULT_VALUE_164=Keep the default value: %s
INFO_EDITOR_OPTION_KEEP_INHERITED_DEFAULT_VALUE_165=Keep the inherited default value: %s
INFO_EDITOR_OPTION_KEEP_VALUES_166=Keep these values
INFO_EDITOR_OPTION_KEEP_DEFAULT_VALUES_167=Keep these default values
INFO_EDITOR_OPTION_KEEP_INHERITED_DEFAULT_VALUES_168=Keep these inherited default values
INFO_EDITOR_OPTION_RESET_DEFAULT_ALIAS_169=Reset to the default behavior: %s
INFO_EDITOR_OPTION_RESET_DEFAULT_INHERITED_ALIAS_170=Reset to the inherited default behavior: %s
INFO_EDITOR_OPTION_RESET_DEFAULT_INHERITED_ALIAS_UNDEFINED_171=Reset to the inherited default behavior: undefined
INFO_EDITOR_OPTION_RESET_DEFAULT_VALUE_172=Reset to the default value: %s
INFO_EDITOR_OPTION_RESET_INHERITED_DEFAULT_VALUE_173=Reset to the inherited default value: %s
INFO_EDITOR_OPTION_RESET_DEFAULT_VALUES_174=Reset to the default values: %s
INFO_EDITOR_OPTION_RESET_INHERITED_DEFAULT_VALUES_175=Reset to the inherited default values: %s
INFO_EDITOR_HEADING_READ_ONLY_ALIAS_UNDEFINED_176=The "%s" property is undefined
INFO_EDITOR_HEADING_READ_ONLY_ALIAS_177=The "%s" property is undefined: %s
INFO_EDITOR_HEADING_READ_ONLY_VALUE_178=The "%s" property has the following value: %s
INFO_EDITOR_HEADING_READ_ONLY_VALUES_179=The "%s" property has the following values:
INFO_EDITOR_PROMPT_READ_ONLY_180=This property is read-only and cannot be modified. Would you like to view its help documentation?
INFO_EDITOR_OPTION_CHANGE_TO_DEFAULT_VALUE_181=Change it to the default value: %s
INFO_EDITOR_OPTION_CHANGE_TO_VALUE_182=Change it to the value: %s
INFO_EDITOR_OPTION_CHANGE_VALUE_183=Change the value
INFO_EDITOR_HEADING_CONFIGURE_PROPERTY_184=>>>> Configuring the "%s" property
INFO_EDITOR_PROMPT_READ_FIRST_VALUE_185=Enter a value for the "%s" property:
INFO_EDITOR_PROMPT_READ_FIRST_VALUE_OPTIONAL_186=Enter a value for the "%s" property [continue]:
INFO_EDITOR_PROMPT_READ_NEXT_VALUE_187=Enter another value for the "%s" property [continue]:
ERR_EDITOR_READ_FIRST_DUPLICATE_188=This property already contains the value "%s". Please enter a different value
ERR_EDITOR_READ_NEXT_DUPLICATE_189=This property already contains the value "%s". Please enter a different value, or press RETURN to continue
INFO_EDITOR_HEADING_CONFIGURE_COMPONENT_190=>>>> Configure the properties of the %s
INFO_EDITOR_OPTION_FINISH_CREATE_COMPONENT_191=finish - create the new %s
INFO_EDITOR_OPTION_FINISH_MODIFY_COMPONENT_192=finish - apply any changes to the %s
INFO_EDITOR_OPTION_FINISH_KEY_193=f
INFO_EDITOR_HEADING_CONFIGURE_PROPERTY_CONT_194=>>>> Configuring the "%s" property (Continued)
INFO_DSCFG_CREATE_NAME_PROMPT_NAMING_195=>>>> Specify a name for the %s. This name will be used as the value for the "%s" property which has the following description:
INFO_DSCFG_CREATE_NAME_PROMPT_NAMING_CONT_196=Enter a name for the %s that you want to create:
INFO_DSCFG_HEADING_MAIN_MENU_TITLE_197=>>>> OpenDJ configuration console main menu
INFO_DSCFG_HEADING_MAIN_MENU_PROMPT_198=What do you want to configure?
INFO_DSCFG_HEADING_COMPONENT_MENU_TITLE_199=>>>> %s management menu
INFO_DSCFG_HEADING_COMPONENT_MENU_PROMPT_200=What would you like to do?
INFO_DSCFG_OPTION_COMPONENT_MENU_CREATE_201=Create a new %s
INFO_DSCFG_OPTION_COMPONENT_MENU_MODIFY_SINGULAR_202=View and edit the %s
INFO_DSCFG_OPTION_COMPONENT_MENU_MODIFY_PLURAL_203=View and edit an existing %s
INFO_DSCFG_OPTION_COMPONENT_MENU_DELETE_204=Delete an existing %s
INFO_DSCFG_OPTION_COMPONENT_MENU_LIST_PLURAL_205=List existing %s
INFO_DSCFG_OPTION_COMPONENT_MENU_LIST_SINGULAR_206=Show the %s
INFO_DSCFG_GENERIC_TYPE_OPTION_207=Generic %s
ERR_DSCFG_ERROR_CREATE_ORE_SINGLE_208=The %s could not be created because of the following reason:
ERR_DSCFG_ERROR_CREATE_ORE_PLURAL_209=The %s could not be created because of the following reasons:
ERR_DSCFG_ERROR_DELETE_ORE_SINGLE_210=The %s could not be deleted because of the following reason:
ERR_DSCFG_ERROR_DELETE_ORE_PLURAL_211=The %s could not be deleted because of the following reasons:
ERR_DSCFG_ERROR_MODIFY_ORE_SINGLE_212=The %s could not be modified because of the following reason:
ERR_DSCFG_ERROR_MODIFY_ORE_PLURAL_213=The %s could not be modified because of the following reasons:
INFO_DSCFG_PROMPT_EDIT_AGAIN_214=Would you like to edit the properties of the %s again in order to resolve this problem?
ERR_DSCFG_ERROR_TYPE_UNRECOGNIZED_FOR_SUBCOMMAND_215="%s" component \
type cannot be used with subcommand {%s}
INFO_EDITOR_PROMPT_SELECT_COMPONENT_MULTI_216=Select one or more %s for the "%s" property:
INFO_EDITOR_PROMPT_SELECT_COMPONENT_SINGLE_217=Select a %s for the "%s" property:
INFO_EDITOR_HEADING_COMPONENT_SUMMARY_218=The "%s" property references the following %s:
INFO_EDITOR_PROMPT_SELECT_COMPONENTS_ADD_219=Select the %s you wish to add:
INFO_EDITOR_OPTION_ADD_ALL_COMPONENTS_220=Add all %s
INFO_EDITOR_PROMPT_SELECT_COMPONENTS_REMOVE_221=Select the %s you wish to remove:
INFO_EDITOR_OPTION_CHANGE_TO_DEFAULT_COMPONENT_222=Change it to the default %s: %s
INFO_EDITOR_OPTION_CHANGE_TO_COMPONENT_223=Change it to the %s: %s
INFO_EDITOR_PROMPT_ENABLED_REFERENCED_COMPONENT_224=The referenced %s \
called "%s" must be enabled so that it can be used with this %s. Do \
you want to enable it?
ERR_SET_REFERENCED_COMPONENT_DISABLED_225=The modifications to \
the %s cannot be made because it contains a reference to a \
disabled %s
ERR_CREATE_HEADING_MMPE_SINGLE_226=The %s could not be created because the following mandatory property was not defined:
ERR_CREATE_HEADING_MMPE_PLURAL_227=The %s could not be created because the following mandatory properties were not defined:
ERR_MODIFY_HEADING_MMPE_SINGLE_228=The %s could not be modified because the following mandatory property was not defined:
ERR_MODIFY_HEADING_MMPE_PLURAL_229=The %s could not be modified because the following mandatory properties were not defined:
INFO_DSCFG_PROMPT_EDIT_230=Would you like to edit the properties of the %s in order to resolve this problem?
ERR_GET_HEADING_MODE_SINGLE_231=The %s could not be decoded due to the following reason:
ERR_GET_HEADING_MODE_PLURAL_232=The %s could not be decoded due to the following reasons:
INFO_EDITOR_OPTION_CREATE_A_NEW_COMPONENT_233=Create a new %s
INFO_DSCFG_PROMPT_EDIT_TO_ENABLE_234=The referenced %s \
called "%s" must be enabled so that it can be used with this %s. Do \
you want to edit its properties in order to enable it?
INFO_DSCFG_CUSTOM_TYPE_OPTION_235=Custom %s
INFO_DSCFG_CUSTOM_TYPE_SYNOPSIS_236=A Custom %s with a user-defined \
implementation class
INFO_DSCFG_GENERIC_TYPE_SYNOPSIS_237=A Generic %s
INFO_DSCFG_CREATE_TYPE_HELP_HEADING_238=Help: %s
INFO_DSCFG_NON_INTERACTIVE_239=The equivalent non-interactive command-line is:\
%n%s
INFO_DSCFG_DESCRIPTION_DISPLAY_EQUIVALENT_240=Display the equivalent \
non-interactive argument in the standard output when this command is run in \
interactive mode
INFO_DSCFG_DESCRIPTION_EQUIVALENT_COMMAND_FILE_PATH_241=The full path to the \
file where the equivalent non-interactive commands will be written when this \
command is run in interactive mode
ERR_DSCFG_ERROR_WRITING_EQUIVALENT_COMMAND_LINE_242=An error occurred \
while attempting to write equivalent non-interactive command line to file \
%s. Error details: %s
ERR_DSCFG_CANNOT_WRITE_EQUIVALENT_COMMAND_LINE_FILE_243=Cannot write \
to file %s. Verify that you have access rights to that file and that you \
provided the full path of the file
ERR_DSCFG_EQUIVALENT_COMMAND_LINE_FILE_DIRECTORY_244=The specified \
path %s to write the equivalent command is a directory. You must specify a \
path to a file
ERR_DSCFG_ERROR_LDAP_FAILED_TO_CONNECT_WRONG_PORT_245=Unable to connect to the \
server at %s on port %s. Check this port is an administration port
ERR_DSCFG_ERROR_LDAP_FAILED_TO_CONNECT_NOT_TRUSTED_246=Unable to connect to the \
server at %s on port %s. In non-interactive mode, if the trustStore related parameters are not used, \
you must use the '--trustAll' option for remote connections
ERR_DSCFG_ERROR_VALUE_DOES_NOT_EXIST_247=The value %s for the %s property does not exist
ERR_DSCFG_ERROR_NO_AVAILABLE_TYPES_248=Unable to continue since there are \
no available types of %s to choose from
INFO_DSCFG_TYPE_PROMPT_SINGLE_249=>>>> There is only one type of %s available: "%s". \
Are you sure that this is the correct one?
ERR_DSCFG_ERROR_READING_BATCH_FILE_250=An error occurred \
while attempting to read the batch file : %s
INFO_DSCFG_SESSION_START_TIME_MESSAGE_251=%s session start date: %s
INFO_DSCFG_EQUIVALENT_COMMAND_LINE_SESSION_OPERATION_NUMBER_252=Session \
operation number: %d
INFO_DSCFG_DESCRIPTION_OPTIONS_ARGS_253=Configuration Options
ERR_DSCFG_ERROR_QUIET_AND_INTERACTIVE_INCOMPATIBLE_254=If you specify \
the {%s} argument you must also specify {%s}
INFO_DSCFG_TOOL_DESCRIPTION_255=This utility can be used to define a base \
configuration for the Directory Server
INFO_DSCFG_BATCH_FILE_PATH_256=Path to a batch file containing \
a set of dsconfig commands to be executed
# Strings for generated reference documentation.
REF_DSCFG_ALLOW_UNLIMITED_1000=A value of "-1" or "unlimited" for no limit.
REF_DSCFG_ACI_SYNTAX_REL_URL_1001=About Access Control Instructions
REF_DSCFG_DURATION_SYNTAX_REL_URL_1002= \
\
Some property values take a time duration. \
Durations are expressed as numbers followed by units. \
For example 1 s means one second, \
and 2 w means two weeks. \
Some durations have minimum granularity or maximum units, \
so you cannot necessary specify every duration \
in milliseconds or weeks for example. \
Some durations allow you to use a special value to mean unlimited. \
Units are specified as follows. \
\
\
ms: milliseconds \
s: seconds \
m: minutes \
h: hours \
d: days \
w: weeks \
REF_DSCFG_ARG_ADDITIONAL_INFO_1003=%s properties depend on the %s type, \
which depends on the %s option.
REF_DSCFG_SUBTYPE_DEPENDENCIES_1004=%s properties depend on the %s type, \
which depends on the %s you provide.
REF_DSCFG_SUBTYPE_TYPES_INTRO_1005=By default, OpenDJ directory server \
supports the following %s types:
REF_DSCFG_CHILD_DEFAULT_1006=Default %s: %s
REF_DSCFG_CHILD_ENABLED_BY_DEFAULT_1007=Enabled by default: %b
REF_DSCFG_CHILD_LINK_1008=See %s for the properties of this %s type.
REF_DSCFG_PROPS_INTRO_1009=%s of type %s have the following properties:
REF_DSCFG_PROPS_LABEL_DEFAULT_VALUE_1010=Default Value
REF_DSCFG_PROPS_LABEL_ALLOWED_VALUES_1011=Allowed Values
REF_DSCFG_PROPS_LABEL_MULTI_VALUED_1012=Multi-valued
REF_DSCFG_PROPS_LABEL_REQUIRED_1013=Required
REF_DSCFG_PROPS_LABEL_ADMIN_ACTION_REQUIRED_1014=Admin Action Required
REF_DSCFG_PROPS_LABEL_ADVANCED_PROPERTY_1015=Advanced Property
REF_DSCFG_PROPS_LABEL_READ_ONLY_1016=Read-only
REF_DSCFG_ADMIN_ACTION_COMPONENT_RESTART_1017=The %s must be disabled \
and re-enabled for changes to this setting to take effect
REF_DSCFG_ADMIN_ACTION_SERVER_RESTART_1018=Restart the server
REF_DSCFG_ADMIN_ACTION_NONE_1019=None
REF_DSCFG_PROP_YES_1020=Yes
REF_DSCFG_PROP_YES_ADVANCED_1021=Yes (Use --advanced in interactive mode.)
REF_DSCFG_PROP_NO_1022=No
REF_DSCFG_DEFAULT_BEHAVIOR_NONE_1023=None
REF_DSCFG_DEFAULT_BEHAVIOR_1024=%s
REF_DSCFG_AGGREGATION_1025=The DN of any %s
REF_DSCFG_ANY_ATTRIBUTE_1026=The name of an attribute type defined in the server schema
REF_DSCFG_JAVA_PLUGIN_1027=A Java class that implements or extends the class(es):
REF_DSCFG_VALID_DN_1028=A valid DN
REF_DSCFG_DURATION_MAX_UNIT_1029=Maximum unit is "%s"
REF_DSCFG_DURATION_LOWER_LIMIT_1030=Lower limit is %d %s
REF_DSCFG_DURATION_UPPER_LIMIT_1031=Upper limit is %d %s
REF_DSCFG_INT_1032=An integer value
REF_DSCFG_INT_LOWER_LIMIT_1033=Lower value is %d
REF_DSCFG_INT_UPPER_LIMIT_1034=Upper value is %d
REF_DSCFG_INT_UNIT_1035=Unit is %s
REF_DSCFG_IP_ADDRESS_1036=An IP address
REF_DSCFG_IP_ADDRESS_MASK_1037=An IP address mask
REF_DSCFG_STRING_1038=A String
REF_DSCFG_UNKNOWN_1039=Unknown
REF_SHORT_DESC_DSCONFIG_1040=manage OpenDJ directory server configuration
REF_DSCFG_DOC_TOOL_DESCRIPTION_1041= \
The dsconfig command is the primary command-line tool \
for viewing and editing OpenDJ configuration. \
When started without arguments, \
dsconfig prompts you for administration connection information, \
including the host name, administration port number, \
administrator bind DN and administrator password. \
The dsconfig command then connects securely \
to the directory server over the administration port. \
Once connected it presents you with a menu-driven interface to the server configuration. \
\
\
\
When you pass connection information, subcommands, and additional options \
to dsconfig, \
the command runs in script mode and so is not interactive, \
though it can prompt you to ask whether to apply changes \
and whether to trust certificates \
(unless you use the \
and options, respectively). \
\
\
\
You can prepare dsconfig batch scripts \
by running the tool with the option \
in interactive mode, \
then reading from the batch file with the option \
in script mode. \
Batch files can be useful when you have many dsconfig commands to run \
and want to avoid starting the JVM and setting up a new connection for each command. \
\
\
\
The dsconfig command categorizes \
directory server configuration into components, \
also called managed objects. \
Actual components often inherit from a parent component type. \
For example, one component is a Connection Handler. \
An LDAP Connection Handler is a type of Connection Handler. \
You configure the LDAP Connection Handler component \
to specify how OpenDJ directory server handles LDAP connections \
coming from client applications. \
\
\
\
Configuration components have properties. \
For example, the LDAP Connection Handler component has properties \
such as listen-port and allow-start-tls. \
You can set the component's listen-port property \
to 389 to use the default LDAP port number. \
You can set the component's allow-start-tls property \
to true to permit LDAP client applications to use StartTLS. \
Much of the configuration you do with dsconfig \
involves setting component properties. \
REF_DSCFG_DOC_SUBCOMMANDS_DESCRIPTION_1042= \
The dsconfig command provides many subcommands. \
\
\
\
Subcommands let you create, list, and delete entire configuration components, \
and also let you get and set component properties. \
Subcommands therefore have names that reflect these five actions. \
\
\
\
create-component \
list-components \
delete-component \
get-component-prop \
set-component-prop \
\
\
\
Here, component names are names of managed object types. \
Subcommand component names \
are lower-case, hyphenated versions of the friendly names. \
When you act on an actual configuration component, \
you provide the name of the component as an option argument. \
\
\
\
\
For example, the Log Publisher component has these corresponding subcommands. \
\
\
create-log-publisher \
list-log-publishers \
delete-log-publisher \
get-log-publisher-prop \
set-log-publisher-prop \
\
\
\
When you create or delete Log Publisher components \
and when you get and set their configuration properties, \
you provide the name of the actual log publisher, \
which you can find by using the list-log-publishers subcommand. \
\
\
\n \
$ dsconfig \\ \n \
list-log-publishers \\ \n \
--hostname opendj.example.com \\ \n \
--port 4444 \\ \n \
--bindDN "cn=Directory Manager" \\ \n \
--bindPassword password \\ \n \
--trustAll \n \
\n \
Log Publisher : Type : enabled \n \
------------------------------:------------------------:-------- \n \
File-Based Access Logger : file-based-access : true \n \
File-Based Audit Logger : file-based-audit : false \n \
File-Based Debug Logger : file-based-debug : false \n \
File-Based Error Logger : file-based-error : true \n \
File-Based HTTP Access Logger : file-based-http-access : false \n \
Replication Repair Logger : file-based-error : true \n \
\n \
$ dsconfig \\ \n \
get-log-publisher-prop \\ \n \
--publisher-name "File-Based Access Logger" \\ \n \
--property rotation-policy \\ \n \
--hostname opendj.example.com \\ \n \
--port 4444 \\ \n \
--bindDN "cn=Directory Manager" \\ \n \
--bindPassword password \\ \n \
--trustAll \n \
Property : Value(s) \n \
----------------:-------------------------------------------------------------- \n \
rotation-policy : 24 Hours Time Limit Rotation Policy, Size Limit Rotation \n \
: Policy \n \
\
\
\
Many subcommands let you set property values. \
Notice in the reference for the subcommands below \
that specific options are available for handling multi-valued properties. \
Whereas you can assign a single property value \
by using the option, \
you assign multiple values to a multi-valued property \
by using the option. \
You can reset the values of the multi-valued property \
by using the option. \
\
\
\
\
Some property values take a time duration. \
Durations are expressed as numbers followed by units. \
For example 1 s means one second, \
and 2 w means two weeks. \
Some durations have minimum granularity or maximum units, \
so you cannot necessary specify every duration in milliseconds or weeks for example. \
Some durations allow you to use a special value to mean unlimited. \
Units are specified as follows: \
\
\
ms: milliseconds \
s: seconds \
m: minutes \
h: hours \
d: days \
w: weeks \
\
\
\
Use the following options to view help for subcommands. \
\
\
\
\
dsconfig --help-all \
\
\
Display all subcommands \
\
\
\
\
dsconfig --help-core-server \
\
\
Display subcommands relating to core server \
\
\
\
\
dsconfig --help-database \
\
\
Display subcommands relating to caching and back-ends \
\
\
\
\
dsconfig --help-logging \
\
\
Display subcommands relating to logging \
\
\
\
\
dsconfig --help-replication \
\
\
Display subcommands relating to replication \
\
\
\
\
dsconfig --help-security \
\
\
Display subcommands relating to authentication and authorization \
\
\
\
\
dsconfig --help-user-management \
\
\
Display subcommands relating to user management \
\
\
\
\
\
\
For help with individual subcommands, \
either use dsconfig subcommand --help, \
or start dsconfig in interactive mode, \
without specifying a subcommand. \
\
\
\
To view all component properties, \
use the dsconfig list-properties command. \