# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License, Version 1.0 only
# (the "License").  You may not use this file except in compliance
# with the License.
#
# You can obtain a copy of the license at legal-notices/CDDLv1_0.txt
# or http://forgerock.org/license/CDDLv1.0.html.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at legal-notices/CDDLv1_0.txt.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information:
#      Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#      Copyright 2006-2010 Sun Microsystems, Inc.
#      Portions Copyright 2011-2014 ForgeRock AS



#
# Global directives
#
#global.category=CORE

#
# Format string definitions
#
# Keys must be formatted as follows:
#
# [SEVERITY]_[DESCRIPTION]_[ORDINAL]
#
# where:
#
# SEVERITY is one of:
# [ERR, WARN, NOTICE, INFO, DEBUG]
#
# DESCRIPTION is an upper case string providing a hint as to the context of
# the message in upper case with the underscore ('_') character serving as
# word separator
#
# ORDINAL is an integer unique among other ordinals in this file
#
ERR_CANNOT_CANCEL_ABANDON_1=Abandon requests cannot be canceled
ERR_CANNOT_CANCEL_BIND_2=Bind requests cannot be canceled
ERR_CANNOT_CANCEL_UNBIND_3=Unbind requests cannot be canceled
INFO_DISCONNECT_DUE_TO_UNBIND_4=Client Unbind
INFO_DISCONNECT_DUE_TO_CLIENT_CLOSURE_5=Client Disconnect
INFO_DISCONNECT_DUE_TO_REJECTED_CLIENT_6=Client Connection Rejected
INFO_DISCONNECT_DUE_TO_IO_ERROR_7=I/O Error
INFO_DISCONNECT_DUE_TO_PROTOCOL_ERROR_8=Protocol Error
INFO_DISCONNECT_DUE_TO_SERVER_SHUTDOWN_9=Server Shutdown
INFO_DISCONNECT_BY_ADMINISTRATOR_10=Administrative Termination
INFO_DISCONNECT_DUE_TO_SECURITY_PROBLEM_11=Security Problem
INFO_DISCONNECT_DUE_TO_MAX_REQUEST_SIZE_12=Maximum Request Size Exceeded
INFO_DISCONNECT_DUE_TO_ADMIN_LIMIT_13=Administrative Limit Exceeded
INFO_DISCONNECT_DUE_TO_IDLE_TIME_LIMIT_14=Idle Time Limit Exceeded
INFO_DISCONNECT_DUE_TO_IO_TIMEOUT_15=I/O Timeout
INFO_DISCONNECT_BY_PLUGIN_16=Connection Closed by Plugin
INFO_DISCONNECT_OTHER_17=Unknown Closure Reason
INFO_RESULT_SUCCESS_63=Success
INFO_RESULT_OPERATIONS_ERROR_64=Operations Error
INFO_RESULT_PROTOCOL_ERROR_65=Protocol Error
INFO_RESULT_TIME_LIMIT_EXCEEDED_66=Time Limit Exceeded
INFO_RESULT_SIZE_LIMIT_EXCEEDED_67=Size Limit Exceeded
INFO_RESULT_COMPARE_FALSE_68=Compare False
INFO_RESULT_COMPARE_TRUE_69=Compare True
INFO_RESULT_AUTH_METHOD_NOT_SUPPORTED_70=Authentication Method Not Supported
INFO_RESULT_STRONG_AUTH_REQUIRED_71=Strong Authentication Required
INFO_RESULT_REFERRAL_72=Referral
INFO_RESULT_ADMIN_LIMIT_EXCEEDED_73=Administrative Limit Exceeded
INFO_RESULT_UNAVAILABLE_CRITICAL_EXTENSION_74=Unavailable Critical Extension
INFO_RESULT_CONFIDENTIALITY_REQUIRED_75=Confidentiality Required
INFO_RESULT_SASL_BIND_IN_PROGRESS_76=SASL Bind in Progress
INFO_RESULT_NO_SUCH_ATTRIBUTE_77=No Such Attribute
INFO_RESULT_UNDEFINED_ATTRIBUTE_TYPE_78=Undefined Attribute Type
INFO_RESULT_INAPPROPRIATE_MATCHING_79=Inappropriate Matching
INFO_RESULT_CONSTRAINT_VIOLATION_80=Constraint Violation
INFO_RESULT_ATTRIBUTE_OR_VALUE_EXISTS_81=Attribute or Value Exists
INFO_RESULT_INVALID_ATTRIBUTE_SYNTAX_82=Invalid Attribute Syntax
INFO_RESULT_NO_SUCH_OBJECT_83=No Such Entry
INFO_RESULT_ALIAS_PROBLEM_84=Alias Problem
INFO_RESULT_INVALID_DN_SYNTAX_85=Invalid DN Syntax
INFO_RESULT_ALIAS_DEREFERENCING_PROBLEM_86=Alias Dereferencing Problem
INFO_RESULT_INAPPROPRIATE_AUTHENTICATION_87=Inappropriate Authentication
INFO_RESULT_INVALID_CREDENTIALS_88=Invalid Credentials
INFO_RESULT_INSUFFICIENT_ACCESS_RIGHTS_89=Insufficient Access Rights
INFO_RESULT_BUSY_90=Busy
INFO_RESULT_UNAVAILABLE_91=Unavailable
INFO_RESULT_UNWILLING_TO_PERFORM_92=Unwilling to Perform
INFO_RESULT_LOOP_DETECT_93=Loop Detected
INFO_RESULT_NAMING_VIOLATION_94=Naming Violation
INFO_RESULT_OBJECTCLASS_VIOLATION_95=Object Class Violation
INFO_RESULT_NOT_ALLOWED_ON_NONLEAF_96=Not Allowed on Non-Leaf
INFO_RESULT_NOT_ALLOWED_ON_RDN_97=Not Allowed on RDN
INFO_RESULT_ENTRY_ALREADY_EXISTS_98=Entry Already Exists
INFO_RESULT_OBJECTCLASS_MODS_PROHIBITED_99=Object Class Modifications \
 Prohibited
INFO_RESULT_AFFECTS_MULTIPLE_DSAS_100=Affects Multiple DSAs
INFO_RESULT_CANCELED_101=Canceled
INFO_RESULT_NO_SUCH_OPERATION_102=No Such Operation
INFO_RESULT_TOO_LATE_103=Too Late
INFO_RESULT_CANNOT_CANCEL_104=Cannot Cancel
INFO_RESULT_OTHER_105=Other
INFO_CANCELED_BY_SHUTDOWN_107=Processing on this operation has been canceled \
 because the Directory Server is shutting down
ERR_UNCAUGHT_WORKER_THREAD_EXCEPTION_108=%s encountered an uncaught \
 exception while processing operation %s: %s
WARN_UNEXPECTED_WORKER_THREAD_EXIT_109=%s is unexpectedly exiting when \
 the Directory Server is not in the process of shutting down. This likely \
 indicates that the thread encountered an unexpected error
WARN_OP_REJECTED_BY_SHUTDOWN_111=The request to process this operation \
 has been rejected because the Directory Server has already started its \
 shutdown process
WARN_OP_REJECTED_BY_QUEUE_FULL_112=The request to process this \
 operation has been rejected because the work queue has already reached its \
 maximum capacity of %d pending operations
WARN_WORKER_INTERRUPTED_WITHOUT_SHUTDOWN_113=%s was interrupted while \
 waiting for new work: %s. This should not happen, but the thread will \
 resume waiting for new work so there should be no adverse effects
WARN_WORKER_WAITING_UNCAUGHT_EXCEPTION_114=An unexpected exception was \
 caught while %s was waiting for new work: %s. This should not happen, but \
 the thread will resume waiting for new work so there should be no adverse \
 effects
WARN_QUEUE_UNABLE_TO_CANCEL_115=The work queue caught an exception while \
 trying to cancel pending operation %s when the Directory Server was shutting \
 down: %s
WARN_QUEUE_UNABLE_TO_NOTIFY_THREAD_116=The work queue caught an \
 exception while trying to notify %s that the Directory Server was shutting \
 down: %s
INFO_DISCONNECT_DUE_TO_SERVER_ERROR_117=Server Error
ERR_CANNOT_BOOTSTRAP_WHILE_RUNNING_118=The Directory Server is \
 currently running. The configuration may not be bootstrapped while the \
 server is online
ERR_CANNOT_LOAD_CONFIG_HANDLER_CLASS_119=Unable to load class %s to \
 serve as the Directory Server configuration handler: %s
ERR_CANNOT_INSTANTIATE_CONFIG_HANDLER_120=Unable to create an instance \
 of class %s to serve as the Directory Server configuration handler: %s
ERR_CANNOT_INITIALIZE_CONFIG_HANDLER_121=An error occurred while trying \
 to initialize the configuration handler %s using configuration file %s: %s
ERR_CANNOT_START_BEFORE_BOOTSTRAP_122=The Directory Server may not be \
 started before the configuration has been bootstrapped
ERR_CANNOT_START_WHILE_RUNNING_123=The Directory Server may not be \
 started while it is already running.  Please stop the running instance \
 before attempting to start it again
ERR_ATTR_TYPE_NORMALIZE_NO_MR_125=Unable to normalize value %s for \
 attribute type %s because no equality matching rule is defined for that \
 attribute
ERR_ENTRY_SCHEMA_MISSING_REQUIRED_ATTR_FOR_OC_126=Entry %s violates the \
 Directory Server schema configuration because it is missing attribute %s \
 which is required by objectclass %s
ERR_ENTRY_SCHEMA_DISALLOWED_USER_ATTR_FOR_OC_127=Entry %s violates the \
 Directory Server schema configuration because it includes attribute %s which \
 is not allowed by any of the objectclasses defined in that entry
ERR_CANNOT_BOOTSTRAP_MATCHING_RULE_129=An error occurred while \
 attempting to bootstrap the matching rule defined in class %s: %s
ERR_CANNOT_BOOTSTRAP_SYNTAX_130=An error occurred while attempting to \
 bootstrap the attribute syntax defined in class %s: %s
INFO_DIRECTORY_BOOTSTRAPPING_132=The Directory Server is beginning the \
 configuration bootstrapping process
NOTE_DIRECTORY_SERVER_STARTING_134=%s (build %s, R%s) starting up
NOTE_DIRECTORY_SERVER_STARTED_135=The Directory Server has started \
 successfully
ERR_CANNOT_CREATE_MBEAN_SERVER_138=An error occurred while attempting \
 to create the JMX MBean server that will be used for monitoring, \
 notification, and configuration interaction within the Directory Server: %s
NOTE_SENT_ALERT_NOTIFICATION_139=The Directory Server has sent an alert \
 notification generated by class %s (alert type %s, alert ID %s): %s
ERR_UNCAUGHT_THREAD_EXCEPTION_140=An uncaught exception during \
 processing for thread %s has caused it to terminate abnormally. The stack \
 trace for that exception is: %s
NOTE_SERVER_SHUTDOWN_141=The Directory Server has started the shutdown \
 process. The shutdown was initiated by an instance of class %s and the \
 reason provided for the shutdown was %s
ERR_SHUTDOWN_DUE_TO_SHUTDOWN_HOOK_142=The Directory Server shutdown \
 hook detected that the JVM is shutting down. This generally indicates that \
 JVM received an external request to stop (e.g., through a kill signal)
ERR_SEARCH_FILTER_NULL_143=Unable to decode the provided filter string \
 as a search filter because the provided string was empty or null
ERR_SEARCH_FILTER_UNCAUGHT_EXCEPTION_144=An unexpected error occurred \
 while attempting to decode the string "%s" as a search filter: %s
ERR_SEARCH_FILTER_MISMATCHED_PARENTHESES_145=The provided search filter \
 "%s" had mismatched parentheses around the portion between positions %d and \
 %d
ERR_SEARCH_FILTER_NO_EQUAL_SIGN_146=The provided search filter "%s" was \
 missing an equal sign in the suspected simple filter component between \
 positions %d and %d
ERR_SEARCH_FILTER_INVALID_ESCAPED_BYTE_147=The provided search filter \
 "%s" had an invalid escaped byte value at position %d. A backslash in a \
 value must be followed by two hexadecimal characters that define the byte \
 that has been encoded
ERR_SEARCH_FILTER_COMPOUND_MISSING_PARENTHESES_148=The provided search \
 filter "%s" could not be decoded because the compound filter between \
 positions %d and %d did not start with an open parenthesis and end with a \
 close parenthesis (they may be parentheses for different filter components)
ERR_SEARCH_FILTER_NO_CORRESPONDING_OPEN_PARENTHESIS_149=The provided \
 search filter "%s" could not be decoded because the closing parenthesis at \
 position %d did not have a corresponding open parenthesis
ERR_SEARCH_FILTER_NO_CORRESPONDING_CLOSE_PARENTHESIS_150=The provided \
 search filter "%s" could not be decoded because the opening parenthesis at \
 position %d did not have a corresponding close parenthesis
ERR_SEARCH_FILTER_SUBSTRING_NO_ASTERISKS_151=The provided search filter \
 "%s" could not be decoded because the assumed substring filter value between \
 positions %d and %d did not have any asterisk wildcard characters
ERR_SEARCH_FILTER_EXTENSIBLE_MATCH_NO_COLON_152=The provided search \
 filter "%s" could not be decoded because the extensible match component \
 starting at position %d did not have a colon to denote the end of the \
 attribute type name
ERR_SEARCH_FILTER_INVALID_FILTER_TYPE_153=Unable to determine whether \
 entry "%s" matches filter "%s" because it contained an unknown filter type %s
ERR_SEARCH_FILTER_INVALID_RESULT_TYPE_154=Unable to determine whether \
 entry "%s" matches filter "%s" because the internal check returned an unknown \
 result type "%s"
ERR_SEARCH_FILTER_COMPOUND_COMPONENTS_NULL_155=Unable to determine \
 whether entry "%s" matches filter "%s" because the set of filter components \
 for an %s component was NULL
ERR_SEARCH_FILTER_NESTED_TOO_DEEP_156=Unable to determine whether entry \
 "%s" matches filter "%s" because the filter was nested beyond the maximum \
 allowed depth of 100 levels
ERR_SEARCH_FILTER_NOT_COMPONENT_NULL_157=Unable to determine whether \
 entry "%s" matches filter "%s" because the NOT filter component did not \
 include a subcomponent
ERR_SEARCH_FILTER_EQUALITY_NO_ATTRIBUTE_TYPE_158=Unable to determine \
 whether entry "%s" matches filter "%s" because an equality component had a \
 NULL attribute type
ERR_SEARCH_FILTER_EQUALITY_NO_ASSERTION_VALUE_159=Unable to determine \
 whether entry "%s" matches filter "%s" because an equality component for \
 attribute %s had a NULL assertion value
ERR_SEARCH_FILTER_SUBSTRING_NO_ATTRIBUTE_TYPE_160=Unable to determine \
 whether entry "%s" matches filter "%s" because a substring component had a \
 NULL attribute type
ERR_SEARCH_FILTER_SUBSTRING_NO_SUBSTRING_COMPONENTS_161=Unable to \
 determine whether entry "%s" matches filter "%s" because a substring \
 component for attribute %s did not have any subInitial, subAny, or subFinal \
 elements
ERR_SEARCH_FILTER_GREATER_OR_EQUAL_NO_ATTRIBUTE_TYPE_162=Unable to \
 determine whether entry "%s" matches filter "%s" because a greater-or-equal \
 component had a NULL attribute type
ERR_SEARCH_FILTER_GREATER_OR_EQUAL_NO_VALUE_163=Unable to determine \
 whether entry "%s" matches filter "%s" because a greater-or-equal component \
 for attribute %s had a NULL assertion value
ERR_SEARCH_FILTER_LESS_OR_EQUAL_NO_ATTRIBUTE_TYPE_164=Unable to \
 determine whether entry "%s" matches filter "%s" because a less-or-equal \
 component had a NULL attribute type
ERR_SEARCH_FILTER_LESS_OR_EQUAL_NO_ASSERTION_VALUE_165=Unable to \
 determine whether entry "%s" matches filter "%s" because a less-or-equal \
 component for attribute %s had a NULL assertion value
ERR_SEARCH_FILTER_PRESENCE_NO_ATTRIBUTE_TYPE_166=Unable to determine \
 whether entry "%s" matches filter "%s" because a presence component had a \
 NULL attribute type
ERR_SEARCH_FILTER_APPROXIMATE_NO_ATTRIBUTE_TYPE_167=Unable to determine \
 whether entry "%s" matches filter "%s" because an approximate component had a \
 NULL attribute type
ERR_SEARCH_FILTER_APPROXIMATE_NO_ASSERTION_VALUE_168=Unable to determine \
 whether entry "%s" matches filter "%s" because an approximate component for \
 attribute %s had a NULL assertion value
ERR_SEARCH_FILTER_EXTENSIBLE_MATCH_NO_ASSERTION_VALUE_169=Unable to \
 determine whether entry "%s" matches filter "%s" because a contained \
 extensible match filter did not have an assertion value
ERR_SEARCH_FILTER_EXTENSIBLE_MATCH_NO_RULE_OR_TYPE_170=Unable to \
 determine whether entry "%s" matches filter "%s" because a contained \
 extensible match filter did not have either an attribute type or a matching \
 rule ID
ERR_RDN_DECODE_NULL_171=Unable to decode the provided string as a \
 relative distinguished name because the provided string was empty or null
ERR_RDN_END_WITH_ATTR_NAME_172=Unable to decode the provided string "%s" \
 as a relative distinguished name because the string ended with an attribute \
 type name (%s)
ERR_RDN_NO_EQUAL_173=Unable to decode the provided string "%s" as a \
 relative distinguished name because the first non-blank character after the \
 attribute type %s was not an equal sign (character read was %c)
ERR_RDN_UNEXPECTED_COMMA_174=Unable to decode the provided string "%s" \
 as a relative distinguished name because it contained an unexpected plus, \
 comma, or semicolon at position %d, which is not allowed in an RDN
ERR_RDN_ILLEGAL_CHARACTER_175=Unable to decode the provided string "%s" \
 as a relative distinguished name because an illegal character %c was found at \
 position %d, where either the end of the string or a '+' sign were expected
ERR_CANNOT_GET_ROOT_DSE_CONFIG_ENTRY_183=An error occurred while \
 trying to retrieve the root DSE configuration entry (cn=Root DSE,cn=config) \
 from the Directory Server configuration: %s
ERR_SCHEMA_CONFLICTING_ATTRIBUTE_OID_184=Unable to register attribute \
 type %s with the server schema because its OID %s conflicts with the OID of \
 an existing attribute type %s
ERR_SCHEMA_CONFLICTING_ATTRIBUTE_NAME_185=Unable to register attribute \
 type %s with the server schema because its name %s conflicts with the name of \
 an existing attribute type %s
ERR_SCHEMA_CONFLICTING_OBJECTCLASS_OID_186=Unable to register \
 objectclass %s with the server schema because its OID %s conflicts with the \
 OID of an existing objectclass %s
ERR_SCHEMA_CONFLICTING_OBJECTCLASS_NAME_187=Unable to register \
 objectclass %s with the server schema because its name %s conflicts with the \
 name of an existing objectclass %s
ERR_SCHEMA_CONFLICTING_SYNTAX_OID_188=Unable to register attribute \
 syntax %s with the server schema because its OID %s conflicts with the OID of \
 an existing syntax %s
ERR_SCHEMA_CONFLICTING_MR_OID_189=Unable to register matching rule %s \
 with the server schema because its OID %s conflicts with the OID of an \
 existing matching rule %s
ERR_SCHEMA_CONFLICTING_MR_NAME_190=Unable to register matching rule %s \
 with the server schema because its name %s conflicts with the name of an \
 existing matching rule %s
ERR_SCHEMA_CONFLICTING_MATCHING_RULE_USE_191=Unable to register matching \
 rule use %s with the server schema because its matching rule %s conflicts \
 with the matching rule for an existing matching rule use %s
ERR_SCHEMA_CONFLICTING_DIT_CONTENT_RULE_192=Unable to register DIT \
 content rule %s with the server schema because its structural objectclass %s \
 conflicts with the structural objectclass for an existing DIT content rule %s
ERR_SCHEMA_CONFLICTING_DIT_STRUCTURE_RULE_NAME_FORM_193=Unable to \
 register DIT structure rule %s with the server schema because its name form \
 %s conflicts with the name form for an existing DIT structure rule %s
ERR_SCHEMA_CONFLICTING_DIT_STRUCTURE_RULE_ID_194=Unable to register DIT \
 structure rule %s with the server schema because its rule ID %d conflicts \
 with the rule ID for an existing DIT structure rule %s
ERR_SCHEMA_CONFLICTING_NAME_FORM_OC_195=Unable to register name form %s \
 with the server schema because its structural objectclass %s conflicts with \
 the structural objectclass for an existing name form %s
ERR_SCHEMA_CONFLICTING_NAME_FORM_OID_196=Unable to register name form %s \
 with the server schema because its OID %s conflicts with the OID for an \
 existing name form %s
ERR_SCHEMA_CONFLICTING_NAME_FORM_NAME_197=Unable to register name form \
 %s with the server schema because its name %s conflicts with the name for an \
 existing name form %s
ERR_ENTRY_SCHEMA_MULTIPLE_STRUCTURAL_CLASSES_198=Entry %s violates the \
 Directory Server schema configuration because it includes multiple \
 conflicting structural objectclasses %s and %s. Only a single structural \
 objectclass is allowed in an entry
ERR_ENTRY_SCHEMA_NO_STRUCTURAL_CLASS_199=Entry %s violates the Directory \
 Server schema configuration because it does not include a structural \
 objectclass. All entries must contain a structural objectclass
WARN_ADD_OP_INVALID_SYNTAX_200=Entry "%s" contains a value "%s" for \
 attribute %s that is invalid according to the syntax for that attribute: %s
WARN_COMPARE_OP_NO_SUCH_ATTR_201=Entry "%s" does not contain any \
 values for attribute "%s"
WARN_COMPARE_OP_NO_SUCH_ATTR_WITH_OPTIONS_202=Entry "%s" does not \
 contain any values for attribute "%s" with the specified set of options
NOTE_SERVER_STOPPED_203=The Directory Server is now stopped
INFO_WORKER_STOPPED_BY_REDUCED_THREADNUMBER_204=%s has been stopped because \
 the total number of worker threads in the Directory Server was reduced
ERR_ENTRY_SCHEMA_ATTR_SINGLE_VALUED_205=Entry %s violates the Directory \
 Server schema configuration because it includes multiple values for attribute \
 %s, which is defined as a single-valued attribute
ERR_ENTRY_SCHEMA_RDN_MISSING_REQUIRED_ATTR_206=Entry %s violates the \
 Directory Server schema configuration because its RDN does not contain \
 attribute %s that is required by name form %s
ERR_ENTRY_SCHEMA_RDN_DISALLOWED_ATTR_207=Entry %s violates the Directory \
 Server schema configuration because its RDN contains attribute %s that is not \
 allowed by name form %s
ERR_ENTRY_SCHEMA_MISSING_REQUIRED_ATTR_FOR_DCR_208=Entry %s violates the \
 Directory Server schema configuration because it is missing attribute %s \
 which is required by DIT content rule %s
ERR_ENTRY_SCHEMA_PROHIBITED_ATTR_FOR_DCR_209=Entry %s violates the \
 Directory Server schema configuration because it contains attribute %s which \
 is prohibited by DIT content rule %s
ERR_ENTRY_SCHEMA_DISALLOWED_AUXILIARY_CLASS_211=Entry %s violates the \
 Directory Server schema configuration because it includes auxiliary \
 objectClass %s that is not allowed by DIT content rule %s
ERR_ENTRY_SCHEMA_DSR_COULD_NOT_LOCK_PARENT_212=The Directory Server was \
 unable to evaluate entry %s to determine whether it was compliant with the \
 DIT structure rule configuration because it was unable to obtain a read lock \
 on parent entry %s
ERR_ENTRY_SCHEMA_DSR_NO_PARENT_ENTRY_213=The Directory Server was unable \
 to evaluate entry %s to determine whether it was compliant with the DIT \
 structure rule configuration because parent entry %s either does not exist or \
 could not be retrieved
ERR_ENTRY_SCHEMA_DSR_NO_PARENT_OC_214=The Directory Server was unable to \
 evaluate entry %s to determine whether it was compliant with the DIT rule \
 configuration because the parent entry %s does not appear to contain a valid \
 structural objectclass
ERR_ENTRY_SCHEMA_DSR_DISALLOWED_SUPERIOR_OC_215=Entry %s violates the \
 Directory Server schema configuration because DIT structure rule %s does not \
 allow entries of type %s to be placed immediately below entries of type %s
ERR_ENTRY_SCHEMA_COULD_NOT_CHECK_DSR_216=An unexpected error occurred \
 while attempting to check entry %s against DIT structure rule %s: %s
INFO_CANCELED_BY_BIND_REQUEST_217=Processing on this operation has been \
 canceled because the Directory Server received a bind request on this \
 connection, which requires that all operations in progress to be abandoned
ERR_BIND_OPERATION_UNKNOWN_USER_218=Unable to bind to the Directory \
 Server because no such user exists in the server
ERR_BIND_OPERATION_CANNOT_LOCK_USER_219=Unable to process the bind \
 because the server was unable to obtain a read lock on the entry %s
ERR_STARTUP_PLUGIN_ERROR_220=A fatal error occurred when executing one \
 of the Directory Server startup plugins: %s (error ID %d). The Directory \
 Server startup process has been aborted
ERR_BIND_OPERATION_NO_PASSWORD_221=Unable to bind to the Directory \
 Server using simple authentication because that user does not have a password
ERR_BIND_OPERATION_UNKNOWN_SASL_MECHANISM_222=Unable to process the bind \
 request because it attempted to use an unknown SASL mechanism %s that is not \
 available in the Directory Server
ERR_ABANDON_OP_NO_SUCH_OPERATION_223=Unable to abandon the operation \
 with message ID %d because no information is available about that operation. \
 This could mean that the target operation has already completed or was never \
 requested
ERR_COMPARE_CANNOT_LOCK_ENTRY_227=The Directory Server was unable to \
 obtain a read lock on entry %s after multiple attempts. Processing on this \
 operation cannot continue
ERR_COMPARE_NO_SUCH_ENTRY_228=The specified entry %s does not exist in \
 the Directory Server
INFO_CANCELED_BY_ABANDON_REQUEST_229=The operation was canceled because the \
 client issued an abandon request (message ID %d) for this operation
ERR_ADD_CANNOT_ADD_ROOT_DSE_230=The provided entry cannot be added \
 because it contains a null DN. This DN is reserved for the root DSE, and \
 that entry may not be added over protocol
ERR_ADD_ENTRY_NOT_SUFFIX_231=The provided entry %s cannot be added \
 because it does not have a parent and is not defined as one of the suffixes \
 within the Directory Server
ERR_ADD_CANNOT_LOCK_PARENT_232=Entry %s cannot be added because the \
 server failed to obtain a read lock on the parent entry %s after multiple \
 attempts
ERR_ADD_NO_PARENT_233=Entry %s cannot be added because its parent entry \
 %s does not exist in the server
ERR_ADD_CANNOT_LOCK_ENTRY_234=Entry %s cannot be added because the \
 server failed to obtain a write lock for this entry after multiple attempts
ERR_DELETE_CANNOT_LOCK_ENTRY_235=Entry %s cannot be removed because \
 the server failed to obtain a write lock for this entry after multiple \
 attempts
ERR_SEARCH_TIME_LIMIT_EXCEEDED_238=The maximum time limit of %d seconds \
 for processing this search operation has expired
ERR_SEARCH_SIZE_LIMIT_EXCEEDED_239=This search operation has sent the \
 maximum of %d entries to the client
ERR_SEARCH_BASE_DOESNT_EXIST_240=The entry %s specified as the search \
 base does not exist in the Directory Server
ERR_DELETE_NO_SUCH_ENTRY_241=Entry %s does not exist in the Directory \
 Server
ERR_DELETE_HAS_SUB_BACKEND_242=Entry %s cannot be removed because the \
 backend that should contain that entry has a subordinate backend with a base \
 DN of %s that is below the target DN
ERR_MODDN_NO_PARENT_243=A modify DN operation cannot be performed on \
 entry %s because the new RDN would not have a parent DN
ERR_MODDN_NO_BACKEND_FOR_CURRENT_ENTRY_244=The modify DN operation for \
 entry %s cannot be performed because no backend is registered to handle that \
 DN
ERR_MODDN_NO_BACKEND_FOR_NEW_ENTRY_245=The modify DN operation for entry \
 %s cannot be performed because no backend is registered to handle the new DN \
 %s
ERR_MODDN_DIFFERENT_BACKENDS_246=The modify DN operation for entry %s \
 cannot be performed because the backend holding the current entry is \
 different from the backend used to handle the new DN %s. Modify DN \
 operations may not span multiple backends
ERR_MODDN_CANNOT_LOCK_CURRENT_DN_247=The modify DN operation for entry \
 %s cannot be performed because the server was unable to obtain a write lock \
 for that DN
ERR_MODDN_EXCEPTION_LOCKING_NEW_DN_248=The modify DN operation for \
 entry %s cannot be performed because an exception was caught while attempting \
 to obtain a write lock for new DN %s: %s
ERR_MODDN_CANNOT_LOCK_NEW_DN_249=The modify DN operation for entry %s \
 cannot be performed because the server was unable to obtain a write lock for \
 the new DN %s
ERR_MODDN_NO_CURRENT_ENTRY_250=The modify DN operation for entry %s \
 cannot be performed because that entry does not exist in the server
ERR_MODIFY_CANNOT_LOCK_ENTRY_251=Entry %s cannot be modified because \
 the server failed to obtain a write lock for this entry after multiple \
 attempts
ERR_MODIFY_NO_SUCH_ENTRY_252=Entry %s cannot be modified because no such \
 entry exists in the server
ERR_MODIFY_ADD_NO_VALUES_253=Entry %s cannot be modified because the \
 modification contained an add component for attribute %s but no values were \
 provided
ERR_MODIFY_ADD_INVALID_SYNTAX_254=When attempting to modify entry %s to \
 add one or more values for attribute %s, value "%s" was found to be invalid \
 according to the associated syntax: %s
ERR_MODIFY_ADD_DUPLICATE_VALUE_255=Entry %s cannot be modified because \
 it would have resulted in one or more duplicate values for attribute %s: %s
ERR_MODIFY_DELETE_RDN_ATTR_256=Entry %s cannot be modified because the \
 change to attribute %s would have removed a value used in the RDN
ERR_MODIFY_DELETE_MISSING_VALUES_257=Entry %s cannot be modified because \
 the attempt to update attribute %s would have removed one or more values from \
 the attribute that were not present: %s
ERR_MODIFY_DELETE_NO_SUCH_ATTR_258=Entry %s cannot be modified because \
 an attempt was made to remove one or more values from attribute %s but this \
 attribute is not present in the entry
ERR_MODIFY_REPLACE_INVALID_SYNTAX_259=When attempting to modify entry %s \
 to replace the set of values for attribute %s, value "%s" was found to be \
 invalid according to the associated syntax: %s
ERR_MODIFY_INCREMENT_RDN_260=Entry %s cannot be modified because an \
 attempt was made to increment the value of attribute %s which is used as an \
 RDN attribute for the entry
ERR_MODIFY_INCREMENT_REQUIRES_VALUE_261=Entry %s cannot be modified \
 because an attempt was made to increment the value of attribute %s but the \
 request did not include a value for that attribute specifying the amount by \
 which to increment the value
ERR_MODIFY_INCREMENT_REQUIRES_SINGLE_VALUE_262=Entry %s cannot be \
 modified because an attempt was made to increment the value of attribute %s \
 but the request contained multiple values, where only a single integer value \
 is allowed
ERR_MODIFY_INCREMENT_PROVIDED_VALUE_NOT_INTEGER_263=Entry %s cannot be \
 modified because an attempt was made to increment the value of attribute %s \
 but the value "%s" contained in the request could not be parsed as an integer
ERR_MODIFY_INCREMENT_REQUIRES_EXISTING_VALUE_264=Entry %s cannot be \
 modified because an attempt was made to increment the value of attribute %s \
 but that attribute did not have any values in the target entry
ERR_MODIFY_INCREMENT_REQUIRES_INTEGER_VALUE_265=Entry %s cannot be \
 modified because an attempt was made to increment the value of attribute %s \
 but the value "%s" could not be parsed as an integer
ERR_MODIFY_VIOLATES_SCHEMA_266=Entry %s cannot be modified because \
 the resulting entry would have violated the server schema: %s
ERR_MODIFY_NO_BACKEND_FOR_ENTRY_267=Entry %s cannot be modified because \
 there is no backend registered to handle operations for that entry
ERR_EXTENDED_NO_HANDLER_268=There is no extended operation handler \
 registered with the Directory Server for handling extended operations with a \
 request OID of %s
ERR_ENTRY_SCHEMA_UNKNOWN_OC_269=Entry %s violates the Directory Server \
 schema configuration because it contains an unknown objectclass %s
ERR_SEARCH_BACKEND_EXCEPTION_270=An unexpected error was encountered \
 while processing a search in one of the Directory Server backends: %s
ERR_MODDN_VIOLATES_SCHEMA_271=The modify DN operation for entry %s \
 cannot be performed because the change would have violated the server schema: \
 %s
INFO_CONNHANDLER_CLOSED_BY_SHUTDOWN_272=The Directory Server is shutting down
INFO_CONNHANDLER_CLOSED_BY_DISABLE_273=The connection handler that accepted \
 this connection has been disabled
INFO_CONNHANDLER_CLOSED_BY_DELETE_274=The connection handler that accepted \
 this connection has been removed from the server
ERR_ENTRY_ADD_UNKNOWN_OC_276=Object class %s cannot be added to entry %s \
 because that class is not defined in the Directory Server schema
ERR_ENTRY_ADD_DUPLICATE_OC_277=Object class %s is already present in \
 entry %s and cannot be added a second time
ERR_BIND_OPERATION_WRONG_PASSWORD_279=The password provided by the user \
 did not match any password(s) stored in the user's entry
INFO_DSCORE_DESCRIPTION_CONFIG_CLASS_281=Fully-qualified name \
 of the Java class to use as the Directory Server configuration handler
INFO_DSCORE_DESCRIPTION_CONFIG_FILE_282=Path to the file \
 containing the information needed by the configuration handler to obtain the \
 Directory Server configuration
INFO_DSCORE_DESCRIPTION_FULLVERSION_284=Display extended Directory Server \
 version information
INFO_DSCORE_DESCRIPTION_SYSINFO_285=Display general system information
INFO_DSCORE_DESCRIPTION_USAGE_287=Display this usage information
ERR_DSCORE_CANNOT_INITIALIZE_ARGS_288=An error occurred while \
 attempting to initialize the command-line arguments: %s
ERR_DSCORE_ERROR_PARSING_ARGS_289=An error occurred while attempting to \
 parse the provided set of command line arguments: %s
ERR_DSCORE_CANNOT_BOOTSTRAP_290=An error occurred while attempting to \
 bootstrap the Directory Server: %s
ERR_DSCORE_CANNOT_START_291=An error occurred while trying to start the \
 Directory Server: %s
ERR_BACKUPINFO_NO_DELIMITER_292=The line "%s" associated with the \
 backup information in directory %s could not be parsed because it did not \
 contain an equal sign to delimit the property name from the value
ERR_BACKUPINFO_NO_NAME_293=The line "%s" associated with the backup \
 information in directory %s could not be parsed because it did not include a \
 property name
ERR_BACKUPINFO_MULTIPLE_BACKUP_IDS_294=The backup information \
 structure in directory %s could not be parsed because it contained multiple \
 backup IDs (%s and %s)
ERR_BACKUPINFO_UNKNOWN_PROPERTY_295=The backup information structure \
 in directory %s could not be parsed because it contained an unknown property \
 %s with value %s
ERR_BACKUPINFO_CANNOT_DECODE_296=An unexpected error occurred while \
 trying to decode a backup information structure in directory %s: %s
ERR_BACKUPINFO_NO_BACKUP_ID_297=Unable to decode a backup information \
 structure in directory %s because the structure did not include a backup ID
ERR_BACKUPINFO_NO_BACKUP_DATE_298=The backup information structure \
 with backup ID %s in directory %s was not valid because it did not contain \
 the backup date
ERR_BACKUPDIRECTORY_ADD_DUPLICATE_ID_299=Cannot add a backup with ID \
 %s to backup directory %s because another backup already exists with that ID
ERR_BACKUPDIRECTORY_NO_SUCH_BACKUP_300=Cannot remove backup %s from \
 backup directory %s because no backup with that ID exists in that directory
ERR_BACKUPDIRECTORY_UNRESOLVED_DEPENDENCY_301=Cannot remove backup %s \
 from backup directory %s because it is listed as a dependency for backup %s
ERR_BACKUPDIRECTORY_CANNOT_CREATE_DIRECTORY_302=Backup directory %s \
 does not exist and an error occurred while attempting to create it: %s
ERR_BACKUPDIRECTORY_NOT_DIRECTORY_303=The backup directory path %s \
 exists but does not reference a directory
ERR_BACKUPDIRECTORY_CANNOT_DELETE_SAVED_DESCRIPTOR_304=An error \
 occurred while trying to remove saved backup descriptor file %s: %s. The \
 new backup descriptor has been written to %s but will not be used until it is \
 manually renamed to %s
ERR_BACKUPDIRECTORY_CANNOT_RENAME_CURRENT_DESCRIPTOR_305=An error \
 occurred while trying to rename the current backup descriptor file %s to %s: \
 %s. The new backup descriptor has been written to %s but will not be used \
 until it is manually renamed to %s
ERR_BACKUPDIRECTORY_CANNOT_RENAME_NEW_DESCRIPTOR_306=An error occurred \
 while trying to rename the new backup descriptor file %s to %s: %s. The new \
 backup descriptor will not be used until it is manually renamed
ERR_BACKUPDIRECTORY_NO_DESCRIPTOR_FILE_307=No backup directory \
 descriptor file was found at %s
ERR_BACKUPDIRECTORY_CANNOT_READ_CONFIG_ENTRY_DN_308=The backup \
 descriptor file %s is invalid because the first line should have contained \
 the DN of the backend configuration entry but was blank
ERR_BACKUPDIRECTORY_FIRST_LINE_NOT_DN_309=The backup descriptor file \
 %s is invalid because the first line of the file was "%s", but the DN of the \
 backend configuration entry was expected
ERR_BACKUPDIRECTORY_CANNOT_DECODE_DN_310=An error occurred while \
 trying to decode the value "%s" read from the first line of %s as the DN of \
 the backend configuration entry: %s
ERR_FILELOCKER_LOCK_SHARED_REJECTED_BY_EXCLUSIVE_311=The attempt to \
 obtain a shared lock on file %s was rejected because an exclusive lock was \
 already held on that file
ERR_FILELOCKER_LOCK_SHARED_FAILED_CREATE_312=The attempt to obtain a \
 shared lock on file %s was rejected because the attempt to create the lock \
 file failed: %s
ERR_FILELOCKER_LOCK_SHARED_FAILED_OPEN_313=The attempt to obtain a \
 shared lock on file %s was rejected because the attempt to open the lock file \
 failed: %s
ERR_FILELOCKER_LOCK_SHARED_FAILED_LOCK_314=The attempt to obtain a \
 shared lock on file %s was rejected because an error occurred while \
 attempting to acquire the lock: %s
ERR_FILELOCKER_LOCK_SHARED_NOT_GRANTED_315=The shared lock requested for \
 file %s was not granted, which indicates that another process already holds \
 an exclusive lock on that file
ERR_FILELOCKER_LOCK_EXCLUSIVE_REJECTED_BY_EXCLUSIVE_316=The attempt to \
 obtain an exclusive lock on file %s was rejected because an exclusive lock \
 was already held on that file
ERR_FILELOCKER_LOCK_EXCLUSIVE_REJECTED_BY_SHARED_317=The attempt to \
 obtain an exclusive lock on file %s was rejected because a shared lock was \
 already held on that file
ERR_FILELOCKER_LOCK_EXCLUSIVE_FAILED_CREATE_318=The attempt to obtain an \
 exclusive lock on file %s was rejected because the attempt to create the lock \
 file failed: %s
ERR_FILELOCKER_LOCK_EXCLUSIVE_FAILED_OPEN_319=The attempt to obtain an \
 exclusive lock on file %s was rejected because the attempt to open the lock \
 file failed: %s
ERR_FILELOCKER_LOCK_EXCLUSIVE_FAILED_LOCK_320=The attempt to obtain an \
 exclusive lock on file %s was rejected because an error occurred while \
 attempting to acquire the lock: %s
ERR_FILELOCKER_LOCK_EXCLUSIVE_NOT_GRANTED_321=The exclusive lock \
 requested for file %s was not granted, which indicates that another process \
 already holds a shared or exclusive lock on that file
ERR_FILELOCKER_UNLOCK_EXCLUSIVE_FAILED_RELEASE_322=The attempt to \
 release the exclusive lock held on %s failed: %s
ERR_FILELOCKER_UNLOCK_SHARED_FAILED_RELEASE_323=The attempt to release \
 the shared lock held on %s failed: %s
ERR_FILELOCKER_UNLOCK_UNKNOWN_FILE_324=The attempt to release the lock \
 held on %s failed because no record of a lock on that file was found
INFO_RESULT_CLIENT_SIDE_SERVER_DOWN_325=Server Connection Closed
INFO_RESULT_CLIENT_SIDE_LOCAL_ERROR_326=Local Error
INFO_RESULT_CLIENT_SIDE_ENCODING_ERROR_327=Encoding Error
INFO_RESULT_CLIENT_SIDE_DECODING_ERROR_328=Decoding Error
INFO_RESULT_CLIENT_SIDE_TIMEOUT_329=Client-Side Timeout
INFO_RESULT_CLIENT_SIDE_AUTH_UNKNOWN_330=Unknown Authentication Mechanism
INFO_RESULT_CLIENT_SIDE_FILTER_ERROR_331=Filter Error
INFO_RESULT_CLIENT_SIDE_USER_CANCELLED_332=Cancelled by User
INFO_RESULT_CLIENT_SIDE_PARAM_ERROR_333=Parameter Error
INFO_RESULT_CLIENT_SIDE_NO_MEMORY_334=Out of Memory
INFO_RESULT_CLIENT_SIDE_CONNECT_ERROR_335=Connect Error
INFO_RESULT_CLIENT_SIDE_NOT_SUPPORTED_336=Operation Not Supported
INFO_RESULT_CLIENT_SIDE_CONTROL_NOT_FOUND_337=Control Not Found
INFO_RESULT_CLIENT_SIDE_NO_RESULTS_RETURNED_338=No Results Returned
INFO_RESULT_CLIENT_SIDE_MORE_RESULTS_TO_RETURN_339=More Results to Return
INFO_RESULT_CLIENT_SIDE_CLIENT_LOOP_340=Referral Loop Detected
INFO_RESULT_CLIENT_SIDE_REFERRAL_LIMIT_EXCEEDED_341=Referral Hop Limit \
 Exceeded
WARN_SHUTDOWN_CANNOT_RELEASE_SHARED_BACKEND_LOCK_342=An error occurred \
 while attempting to release a shared lock for backend %s: %s. This lock \
 should be automatically cleaned when the Directory Server process exits, so \
 no additional action should be necessary
ERR_CANNOT_ACQUIRE_EXCLUSIVE_SERVER_LOCK_343=The Directory Server could \
 not acquire an exclusive lock on file %s: %s. This generally means that \
 another instance of this server is already running
ERR_MODIFY_ATTR_IS_NO_USER_MOD_346=Entry %s cannot be modified because \
 the modification attempted to update attribute %s which is defined as \
 NO-USER-MODIFICATION in the server schema
ERR_ADD_ATTR_IS_NO_USER_MOD_347=Entry %s cannot be added because it \
 includes attribute %s which is defined as NO-USER-MODIFICATION in the server \
 schema
ERR_MODDN_OLD_RDN_ATTR_IS_NO_USER_MOD_348=Entry %s cannot be renamed \
 because the current DN includes attribute %s which is defined as \
 NO-USER-MODIFICATION in the server schema and the deleteOldRDN flag was set \
 in the modify DN request
ERR_MODDN_NEW_RDN_ATTR_IS_NO_USER_MOD_349=Entry %s cannot be renamed \
 because the new RDN includes attribute %s which is defined as \
 NO-USER-MODIFICATION in the server schema, and the target value for that \
 attribute is not already included in the entry
ERR_MODDN_PREOP_VIOLATES_SCHEMA_356=The modify DN operation for entry %s \
 cannot be performed because a pre-operation plugin modified the entry in a \
 way that caused it to violate the server schema: %s
ERR_MODIFY_ASSERTION_FAILED_357=Entry %s cannot be modified because the \
 request contained an LDAP assertion control and the associated filter did not \
 match the contents of the entry
ERR_MODIFY_CANNOT_PROCESS_ASSERTION_FILTER_358=Entry %s cannot be \
 modified because the request contained an LDAP assertion control, but an \
 error occurred while attempting to compare the target entry against the \
 filter contained in the control: %s
ERR_MODIFY_UNSUPPORTED_CRITICAL_CONTROL_359=Entry %s cannot be modified \
 because the request contained a critical control with OID %s that is not \
 supported by the Directory Server for this type of operation
ERR_DELETE_ASSERTION_FAILED_362=Entry %s cannot be removed because the \
 request contained an LDAP assertion control and the associated filter did not \
 match the contents of the entry
ERR_DELETE_CANNOT_PROCESS_ASSERTION_FILTER_363=Entry %s cannot be \
 removed because the request contained an LDAP assertion control, but an error \
 occurred while attempting to compare the target entry against the filter \
 contained in the control: %s
ERR_DELETE_UNSUPPORTED_CRITICAL_CONTROL_364=Entry %s cannot be removed \
 because the request contained a critical control with OID %s that is not \
 supported by the Directory Server for this type of operation
ERR_MODDN_ASSERTION_FAILED_365=Entry %s cannot be renamed because the \
 request contained an LDAP assertion control and the associated filter did not \
 match the contents of the entry
ERR_MODDN_CANNOT_PROCESS_ASSERTION_FILTER_366=Entry %s cannot be renamed \
 because the request contained an LDAP assertion control, but an error \
 occurred while attempting to compare the target entry against the filter \
 contained in the control: %s
ERR_MODDN_UNSUPPORTED_CRITICAL_CONTROL_367=Entry %s cannot be renamed \
 because the request contained a critical control with OID %s that is not \
 supported by the Directory Server for this type of operation
ERR_ADD_ASSERTION_FAILED_368=Entry %s cannot be added because the \
 request contained an LDAP assertion control and the associated filter did not \
 match the contents of the provided entry
ERR_ADD_CANNOT_PROCESS_ASSERTION_FILTER_369=Entry %s cannot be added \
 because the request contained an LDAP assertion control, but an error \
 occurred while attempting to compare the provided entry against the filter \
 contained in the control: %s
ERR_ADD_UNSUPPORTED_CRITICAL_CONTROL_370=Entry %s cannot be added \
 because the request contained a critical control with OID %s that is not \
 supported by the Directory Server for this type of operation
ERR_SEARCH_CANNOT_GET_ENTRY_FOR_ASSERTION_371=The search request cannot \
 be processed because it contains an LDAP assertion control and an error \
 occurred while trying to retrieve the base entry to compare it against the \
 assertion filter: %s
ERR_SEARCH_NO_SUCH_ENTRY_FOR_ASSERTION_372=The search request cannot be \
 processed because it contains an LDAP assertion control but the search base \
 entry does not exist
ERR_SEARCH_ASSERTION_FAILED_373=The search request cannot be processed \
 because it contains an LDAP assertion control and the assertion filter did \
 not match the contents of the base entry
ERR_SEARCH_CANNOT_PROCESS_ASSERTION_FILTER_374=The search request cannot \
 be processed because it contains an LDAP assertion control, but an error \
 occurred while attempting to compare the base entry against the assertion \
 filter: %s
ERR_SEARCH_UNSUPPORTED_CRITICAL_CONTROL_375=The search request cannot be \
 processed because it contains a critical control with OID %s that is not \
 supported by the Directory Server for this type of operation
ERR_COMPARE_ASSERTION_FAILED_376=Cannot perform the compare operation on \
 entry %s because the request contained an LDAP assertion control and the \
 associated filter did not match the contents of the entry
ERR_COMPARE_CANNOT_PROCESS_ASSERTION_FILTER_377=Cannot perform the \
 compare operation on entry %s because the request contained an LDAP assertion \
 control, but an error occurred while attempting to compare the target entry \
 against the filter contained in that control: %s
ERR_COMPARE_UNSUPPORTED_CRITICAL_CONTROL_378=Cannot perform the compare \
 operation on entry %s because the request contained a critical control with \
 OID %s that is not supported by the Directory Server for this type of \
 operation
INFO_ADD_NOOP_379=The add operation was not actually performed in the \
 Directory Server backend because the LDAP no-op control was present in the \
 request
INFO_DELETE_NOOP_380=The delete operation was not actually performed in the \
 Directory Server backend because the LDAP no-op control was present in the \
 request
INFO_MODIFY_NOOP_381=The modify operation was not actually performed in the \
 Directory Server backend because the LDAP no-op control was present in the \
 request
INFO_MODDN_NOOP_382=The modify DN operation was not actually performed in the \
 Directory Server backend because the LDAP no-op control was present in the \
 request
INFO_RESULT_AUTHORIZATION_DENIED_384=Authorization Denied
ERR_ADD_MISSING_RDN_ATTRIBUTE_385=Entry %s cannot be added because it \
 is missing attribute %s that is contained in the entry's RDN. All attributes \
 used in the RDN must also be provided in the attribute list for the entry
ERR_ADD_ERROR_NOTIFYING_CHANGE_LISTENER_386=An unexpected error \
 occurred while notifying a change notification listener of an add operation: \
 %s
ERR_DELETE_ERROR_NOTIFYING_CHANGE_LISTENER_388=An unexpected error \
 occurred while notifying a change notification listener of a delete \
 operation: %s
ERR_MODIFY_ERROR_NOTIFYING_CHANGE_LISTENER_390=An unexpected error \
 occurred while notifying a change notification listener of a modify \
 operation: %s
ERR_MODDN_ERROR_NOTIFYING_CHANGE_LISTENER_392=An unexpected error \
 occurred while notifying a change notification listener of a modify DN \
 operation: %s
ERR_BIND_UNSUPPORTED_CRITICAL_CONTROL_394=Unable to process the bind \
 request because it contained a control with OID %s that was marked critical \
 but this control is not supported for the bind operation
WARN_BIND_MULTIPLE_USER_SIZE_LIMITS_395=There are multiple \
 user-specific size limit values contained in user entry %s. The default \
 server size limit will be used
WARN_BIND_CANNOT_PROCESS_USER_SIZE_LIMIT_396=The user-specific size \
 limit value %s contained in user entry %s could not be parsed as an integer. \
 The default server size limit will be used
WARN_BIND_MULTIPLE_USER_TIME_LIMITS_397=There are multiple \
 user-specific time limit values contained in user entry %s. The default \
 server time limit will be used
WARN_BIND_CANNOT_PROCESS_USER_TIME_LIMIT_398=The user-specific time \
 limit value %s contained in user entry %s could not be parsed as an integer. \
 The default server time limit will be used
INFO_RESULT_ASSERTION_FAILED_399=Assertion Failed
ERR_ADD_ENTRY_ALREADY_EXISTS_400=The entry %s cannot be added because \
 an entry with that name already exists
ERR_ADD_SYNCH_PREOP_FAILED_401=An error occurred during preoperation \
 synchronization processing for the add operation with connection ID %d and \
 operation ID %d: %s
ERR_ADD_SYNCH_POSTOP_FAILED_402=An error occurred during postoperation \
 synchronization processing for the add operation with connection ID %d and \
 operation ID %d: %s
ERR_DELETE_SYNCH_PREOP_FAILED_403=An error occurred during \
 preoperation synchronization processing for the delete operation with \
 connection ID %d and operation ID %d: %s
ERR_DELETE_SYNCH_POSTOP_FAILED_404=An error occurred during \
 postoperation synchronization processing for the delete operation with \
 connection ID %d and operation ID %d: %s
ERR_MODIFY_SYNCH_PREOP_FAILED_405=An error occurred during \
 preoperation synchronization processing for the modify operation with \
 connection ID %d and operation ID %d: %s
ERR_MODIFY_SYNCH_POSTOP_FAILED_406=An error occurred during \
 postoperation synchronization processing for the modify operation with \
 connection ID %d and operation ID %d: %s
ERR_MODDN_SYNCH_PREOP_FAILED_407=An error occurred during preoperation \
 synchronization processing for the modify DN operation with connection ID %d \
 and operation ID %d: %s
ERR_MODDN_SYNCH_POSTOP_FAILED_408=An error occurred during \
 postoperation synchronization processing for the modify DN operation with \
 connection ID %d and operation ID %d: %s
ERR_ADD_SYNCH_CONFLICT_RESOLUTION_FAILED_409=An error occurred during \
 conflict resolution synchronization processing for the add operation with \
 connection ID %d and operation ID %d: %s
ERR_DELETE_SYNCH_CONFLICT_RESOLUTION_FAILED_410=An error occurred \
 during conflict resolution synchronization processing for the delete \
 operation with connection ID %d and operation ID %d: %s
ERR_MODIFY_SYNCH_CONFLICT_RESOLUTION_FAILED_411=An error occurred \
 during conflict resolution synchronization processing for the modify \
 operation with connection ID %d and operation ID %d: %s
ERR_MODDN_SYNCH_CONFLICT_RESOLUTION_FAILED_412=An error occurred \
 during conflict resolution synchronization processing for the modify DN \
 operation with connection ID %d and operation ID %d: %s
ERR_ADD_SERVER_READONLY_413=Unable to add entry %s because the \
 Directory Server is configured in read-only mode
ERR_ADD_BACKEND_READONLY_414=Unable to add entry %s because the \
 backend that should hold that entry is configured in read-only mode
ERR_DELETE_SERVER_READONLY_415=Unable to delete entry %s because the \
 Directory Server is configured in read-only mode
ERR_DELETE_BACKEND_READONLY_416=Unable to delete entry %s because the \
 backend that holds that entry is configured in read-only mode
ERR_MODIFY_SERVER_READONLY_417=Unable to modify entry %s because the \
 Directory Server is configured in read-only mode
ERR_MODIFY_BACKEND_READONLY_418=Unable to modify entry %s because the \
 backend that holds that entry is configured in read-only mode
ERR_MODDN_SERVER_READONLY_419=Unable to rename entry %s because the \
 Directory Server is configured in read-only mode
ERR_MODDN_BACKEND_READONLY_420=Unable to rename entry %s because the \
 backend that holds that entry is configured in read-only mode
ERR_BIND_DN_BUT_NO_PASSWORD_421=Unable to process the simple bind \
 request because it contained a bind DN but no password, which is forbidden by \
 the server configuration
ERR_PWPOLICY_UNDEFINED_PASSWORD_ATTRIBUTE_425=The password policy \
 definition contained in configuration entry "%s" is invalid because the \
 specified password attribute "%s" is not defined in the server schema
ERR_PWPOLICY_INVALID_PASSWORD_ATTRIBUTE_SYNTAX_426=The password policy \
 definition contained in configuration entry "%s" is invalid because the \
 specified password attribute "%s" has a syntax OID of %s. The password \
 attribute must have a syntax OID of either 1.3.6.1.4.1.26027.1.3.1 (for the \
 user password syntax) or 1.3.6.1.4.1.4203.1.1.2 (for the authentication \
 password syntax)
ERR_PWPOLICY_CANNOT_DETERMINE_REQUIRE_CHANGE_BY_TIME_477=An error \
 occurred while attempting to determine the value for attribute \
 ds-cfg-require-change-by-time in configuration entry %s: %s
ERR_PWPOLICY_INVALID_LAST_LOGIN_TIME_FORMAT_482=The password policy \
 definition contained in configuration entry "%s" is invalid because the \
 specified last login time format "%s" is not a valid format string The last \
 login time format string should conform to the syntax described in the API \
 documentation for the <CODE>java.text.SimpleDateFormat</CODE> class
ERR_PWPOLICY_INVALID_PREVIOUS_LAST_LOGIN_TIME_FORMAT_485=The password \
 policy definition contained in configuration entry "%s" is invalid because \
 the specified previous last login time format "%s" is not a valid format \
 string The previous last login time format strings should conform to the \
 syntax described in the API documentation for the \
 <CODE>java.text.SimpleDateFormat</CODE> class
ERR_PWPOLICY_ATTRIBUTE_OPTIONS_NOT_ALLOWED_496=Attribute options are not \
 allowed for the password attribute %s
ERR_PWPOLICY_MULTIPLE_PW_VALUES_NOT_ALLOWED_497=Only a single value may \
 be provided for the password attribute %s
ERR_PWPOLICY_PREENCODED_NOT_ALLOWED_498=Pre-encoded passwords are not \
 allowed for the password attribute %s
ERR_PWPOLICY_VALIDATION_FAILED_499=The password value for attribute %s \
 was found to be unacceptable: %s
ERR_PWPOLICY_MUST_HAVE_WARNING_IF_NOT_EXPIRE_WITHOUT_WARNING_500=The \
 password policy defined in configuration entry %s is configured to always \
 send at least one warning notification before the password is expired, but no \
 warning interval has been set. If configuration attribute \
 ds-cfg-expire-passwords-without-warning is set to "false", then configuration \
 attribute ds-cfg-password-expiration-warning-interval must have a positive \
 value
ERR_ENQUEUE_BIND_IN_PROGRESS_501=A bind operation is currently in \
 progress on the associated client connection. No other requests may be made \
 on this client connection until the bind processing has completed
ERR_ENQUEUE_MUST_CHANGE_PASSWORD_502=%s must change their password \
 before it will be allowed to request any other operations
ERR_PWPSTATE_CANNOT_DECODE_SUBENTRY_VALUE_AS_DN_504=An error occurred \
 while attempting to decode the ds-pwp-password-policy-dn value "%s" in user \
 entry "%s" as a DN: %s
ERR_PWPSTATE_NO_SUCH_POLICY_505=User entry %s is configured to use a \
 password policy subentry of %s but no such password policy has been defined \
 in the server configuration
ERR_PWPSTATE_CANNOT_DECODE_GENERALIZED_TIME_506=An error occurred while \
 attempting to decode value "%s" for attribute %s in user entry %s in \
 accordance with the generalized time format: %s
ERR_PWPSTATE_CANNOT_DECODE_BOOLEAN_507=Unable to decode value "%s" for \
 attribute %s in user entry %s as a Boolean value
ERR_ADD_AUTHZ_INSUFFICIENT_ACCESS_RIGHTS_508=The entry %s cannot be \
 added due to insufficient access rights
ERR_BIND_AUTHZ_INSUFFICIENT_ACCESS_RIGHTS_509=The user cannot bind \
 due to insufficient access rights
ERR_COMPARE_AUTHZ_INSUFFICIENT_ACCESS_RIGHTS_510=The entry %s cannot \
 be compared due to insufficient access rights
ERR_DELETE_AUTHZ_INSUFFICIENT_ACCESS_RIGHTS_511=The entry %s cannot be \
 deleted due to insufficient access rights
ERR_EXTENDED_AUTHZ_INSUFFICIENT_ACCESS_RIGHTS_512=The extended \
 operation %s cannot be performed due to insufficient access rights
ERR_MODDN_AUTHZ_INSUFFICIENT_ACCESS_RIGHTS_513=The entry %s cannot be \
 renamed due to insufficient access rights
ERR_MODIFY_AUTHZ_INSUFFICIENT_ACCESS_RIGHTS_514=The entry %s cannot be \
 modified due to insufficient access rights
ERR_SEARCH_AUTHZ_INSUFFICIENT_ACCESS_RIGHTS_515=The entry %s cannot be \
 searched due to insufficient access rights
ERR_BIND_OPERATION_INSECURE_SIMPLE_BIND_516=Rejecting a simple bind \
 request because the password policy requires secure authentication
ERR_BIND_OPERATION_ACCOUNT_DISABLED_517=Rejecting a bind request \
 because the account has been administratively disabled
ERR_BIND_OPERATION_ACCOUNT_FAILURE_LOCKED_518=Rejecting a bind request \
 because the account has been locked due to too many failed \
 authentication attempts
ERR_BIND_OPERATION_ACCOUNT_RESET_LOCKED_519=Rejecting a bind request \
 because the account has been locked after the user's password was not \
 changed in a timely manner after an administrative reset
ERR_BIND_OPERATION_ACCOUNT_IDLE_LOCKED_520=Rejecting a bind request \
 because the account has been locked after remaining idle for too long
ERR_BIND_OPERATION_PASSWORD_EXPIRED_521=Rejecting a bind request \
 because that user's password is expired
ERR_PWPSTATE_CANNOT_UPDATE_USER_ENTRY_522=An error occurred while \
 attempting to update password policy state information for user %s: %s
ERR_BIND_OPERATION_INSECURE_SASL_BIND_523=Rejecting a SASL %s bind \
 request for user %s because the password policy requires secure \
 authentication
ERR_CANNOT_REGISTER_DUPLICATE_ALTERNATE_ROOT_BIND_DN_530=The alternate \
 root bind DN "%s" is already registered with the Directory Server for actual \
 root entry DN "%s"
ERR_BIND_OPERATION_ACCOUNT_EXPIRED_531=Rejecting a bind request \
 because the account has expired
ERR_MODIFY_PASSWORDS_CANNOT_HAVE_OPTIONS_532=Attributes used to hold \
 user passwords are not allowed to have any attribute options
ERR_MODIFY_NO_USER_PW_CHANGES_533=Users are not allowed to change their \
 own passwords
ERR_MODIFY_REQUIRE_SECURE_CHANGES_534=Password changes must be performed \
 over a secure authentication channel
ERR_MODIFY_WITHIN_MINIMUM_AGE_535=The password cannot be changed because \
 it has not been long enough since the last password change
ERR_MODIFY_MULTIPLE_VALUES_NOT_ALLOWED_536=Multiple password values are \
 not allowed in user entries
ERR_MODIFY_NO_PREENCODED_PASSWORDS_537=User passwords may not be \
 provided in pre-encoded form
ERR_MODIFY_INVALID_MOD_TYPE_FOR_PASSWORD_538=Invalid modification type \
 %s attempted on password attribute %s
ERR_MODIFY_NO_EXISTING_VALUES_539=The user entry does not have any \
 existing passwords to remove
ERR_MODIFY_INVALID_PASSWORD_541=The provided user password does not \
 match any password in the user's entry
ERR_MODIFY_PW_CHANGE_REQUIRES_CURRENT_PW_542=The password policy \
 requires that user password changes include the current password in the \
 request
ERR_MODIFY_MULTIPLE_PASSWORDS_NOT_ALLOWED_543=The password change would \
 result in multiple password values in the user entry, which is not allowed
ERR_MODIFY_PW_VALIDATION_FAILED_544=The provided password value was \
 rejected by a password validator: %s
ERR_MODIFY_MUST_CHANGE_PASSWORD_545=%s must change their password before \
 it will be allowed to perform any other operations
WARN_BIND_PASSWORD_EXPIRING_547=The user password is about to expire \
 (time to expiration: %s)
ERR_BIND_ACCOUNT_TEMPORARILY_LOCKED_548=The account has been locked as a \
 result of too many failed authentication attempts (time to unlock: %s)
ERR_BIND_ACCOUNT_PERMANENTLY_LOCKED_549=The account has been locked as a \
 result of too many failed authentication attempts. It may only be unlocked \
 by an administrator
INFO_MODIFY_PASSWORD_CHANGED_551=The user password has been changed
INFO_MODIFY_PASSWORD_RESET_552=The user password has been administratively \
 reset
INFO_MODIFY_ACCOUNT_ENABLED_553=The user account has been administratively \
 enabled
INFO_MODIFY_ACCOUNT_DISABLED_554=The user account has been administratively \
 disabled
INFO_MODIFY_ACCOUNT_UNLOCKED_555=The user account has been administratively \
 unlocked
ERR_MODIFY_PASSWORD_EXISTS_556=The specified password value already \
 exists in the user entry
WARN_BIND_MULTIPLE_USER_LOOKTHROUGH_LIMITS_557=There are multiple \
 user-specific lookthrough limit values contained in user entry %s. The \
 default server lookthrough limit will be used
WARN_BIND_CANNOT_PROCESS_USER_LOOKTHROUGH_LIMIT_558=The user-specific \
 lookthrough limit value %s contained in user entry %s could not be parsed as \
 an integer. The default server lookthrough limit will be used
ERR_ENTRY_DUPLICATE_VALUES_559=Unable to add one or more values to \
 attribute %s because at least one of the values already exists
ERR_ENTRY_NO_SUCH_VALUE_560=Unable to remove one or more values from \
 attribute %s because at least one of the attributes does not exist in the \
 entry
ERR_ENTRY_OC_INCREMENT_NOT_SUPPORTED_561=The increment operation is not \
 supported for the objectClass attribute
ERR_ENTRY_UNKNOWN_MODIFICATION_TYPE_562=Unknown modification type %s \
 requested
ERR_ENTRY_INCREMENT_INVALID_VALUE_COUNT_564=Unable to increment the \
 value of attribute %s because the provided modification did not have exactly \
 one value to use as the increment
ERR_ENTRY_INCREMENT_CANNOT_PARSE_AS_INT_565=Unable to increment the \
 value of attribute %s because either the current value or the increment could \
 not be parsed as an integer
ERR_MODIFY_NO_MODIFICATIONS_566=Entry %s cannot be updated because the \
 request did not contain any modifications
INFO_DSCORE_DESCRIPTION_NODETACH_567=Do not detach from the terminal and \
 continue running in the foreground. This option cannot be used with the \
-t, --timeout option
ERR_ENTRY_INCREMENT_NO_SUCH_ATTRIBUTE_568=Unable to increment the value \
 of attribute %s because that attribute does not exist in the entry
INFO_DSCORE_TOOL_DESCRIPTION_569=This utility can be used to start the \
 Directory Server, as well as to obtain the server version and other forms of \
 general server information
ERR_EXTENDED_UNSUPPORTED_CRITICAL_CONTROL_570=Unable to process the \
 request for extended operation %s because it contained an unsupported \
 critical control with OID %s
ERR_REGISTER_BACKEND_ALREADY_EXISTS_571=Unable to register backend %s \
 with the Directory Server because another backend with the same backend ID is \
 already registered
ERR_REGISTER_BASEDN_ALREADY_EXISTS_572=Unable to register base DN %s \
 with the Directory Server for backend %s because that base DN is already \
 registered for backend %s
ERR_REGISTER_BASEDN_HIERARCHY_CONFLICT_573=Unable to register base DN \
 %s with the Directory Server for backend %s because that backend already \
 contains another base DN %s that is within the same hierarchical path
ERR_REGISTER_BASEDN_DIFFERENT_PARENT_BASES_574=Unable to register base \
 DN %s with the Directory Server for backend %s because that backend already \
 contains another base DN %s that is not subordinate to the same base DN in \
 the parent backend
ERR_REGISTER_BASEDN_NEW_BASE_NOT_SUBORDINATE_575=Unable to register \
 base DN %s with the Directory Server for backend %s because that backend \
 already contains one or more other base DNs that are subordinate to backend \
 %s but the new base DN is not
WARN_REGISTER_BASEDN_ENTRIES_IN_MULTIPLE_BACKENDS_576=Backend %s \
 already contains entry %s which has just been registered as the base DN for \
 backend %s. These conflicting entries can cause unexpected or errant search \
 results, and both backends should be reinitialized to ensure that each has \
 the correct content
ERR_DEREGISTER_BASEDN_NOT_REGISTERED_577=Unable to de-register base DN \
 %s with the Directory Server because that base DN is not registered for any \
 active backend
WARN_DEREGISTER_BASEDN_MISSING_HIERARCHY_578=Base DN %s has been \
 deregistered from the Directory Server for backend %s. This base DN had both \
 superior and subordinate entries in other backends, and there might be \
 inconsistent or unexpected behavior when accessing entries in this portion of \
 the hierarchy because of the missing entries that had been held in the \
 de-registered backend
ERR_SCHEMA_CIRCULAR_DEPENDENCY_REFERENCE_579=Unable to update the schema \
 element with definition "%s" because a circular reference was identified when \
 attempting to rebuild other schema elements dependent upon it
ERR_REJECT_UNAUTHENTICATED_OPERATION_580=Rejecting the requested \
 operation because the connection has not been authenticated
WARN_ADD_ATTR_IS_OBSOLETE_581=Entry "%s" cannot be added because it \
 contains attribute type %s which is declared OBSOLETE in the server schema
WARN_ADD_OC_IS_OBSOLETE_582=Entry "%s" cannot be added because it \
 contains objectclass %s which is declared OBSOLETE in the server schema
ERR_MODIFY_ATTR_IS_OBSOLETE_583=Entry %s cannot be modified because the \
 modification attempted to set one or more new values for attribute %s which \
 is marked OBSOLETE in the server schema
ERR_ENTRY_ADD_OBSOLETE_OC_584=Object class %s added to entry %s is marked \
 OBSOLETE in the server schema
ERR_MODDN_NEWRDN_ATTR_IS_OBSOLETE_585=The modify DN operation for entry \
 %s cannot be performed because the new RDN includes attribute type %s which \
 is declared OBSOLETE in the server schema
ERR_ENTRY_SCHEMA_VIOLATES_PARENT_DSR_586=Entry %s is invalid according \
 to the server schema because there is no DIT structure rule that applies to \
 that entry, but there is a DIT structure rule for the parent entry %s
ERR_ENTRY_SCHEMA_COULD_NOT_CHECK_PARENT_DSR_587=An unexpected error \
 occurred while attempting to perform DIT structure rule processing for the \
 parent of entry %s: %s
WARN_CLIENTCONNECTION_DISCONNECT_DUE_TO_DELETE_588=Terminating the \
 client connection because its associated authentication or authorization \
 entry %s has been deleted
ERR_MODIFY_PWRESET_INSUFFICIENT_PRIVILEGES_589=You do not have \
 sufficient privileges to reset user passwords
ERR_COMPARE_CONFIG_INSUFFICIENT_PRIVILEGES_590=You do not have \
 sufficient privileges to access the server configuration
ERR_ADD_CHANGE_PRIVILEGE_INSUFFICIENT_PRIVILEGES_591=You do not have \
 sufficient privileges to add entries that include privileges
ERR_MODIFY_CHANGE_PRIVILEGE_INSUFFICIENT_PRIVILEGES_592=You do not have \
 sufficient privileges to modify the set of privileges contained in an entry
INFO_CLIENTCONNECTION_AUDIT_HASPRIVILEGE_593=hasPrivilege determination for \
 connID=%d opID=%d requesterDN="%s" privilege="%s" result=%b
INFO_CLIENTCONNECTION_AUDIT_HASPRIVILEGES_594=hasPrivilege determination for \
 connID=%d opID=%d requesterDN="%s" privilegeSet="%s" result=%b
ERR_PROXYAUTH_INSUFFICIENT_PRIVILEGES_595=You do not have sufficient \
 privileges to use the proxied authorization control
INFO_DSCORE_DESCRIPTION_CHECK_STARTABILITY_596=Used to determine whether a \
 server can be started or not and the mode to be used to start it
ERR_ENTRY_SCHEMA_ATTR_NO_VALUES_597=Entry %s violates the Directory \
 Server schema configuration because it includes attribute %s without any \
 values
ERR_DSCORE_ERROR_NODETACH_AND_WINDOW_SERVICE_598=OpenDJ is configured \
 to run as a Windows service and it cannot run in no-detach mode
INFO_DSCORE_DESCRIPTION_WINDOWS_NET_START_599=Used by the Windows service code \
 to inform that start-ds is being called from the Windows services after a call \
 to net start
ERR_ENTRY_DECODE_UNRECOGNIZED_VERSION_600=Unable to decode an entry \
 because it had an unsupported entry version byte value of %s
ERR_ENTRY_DECODE_EXCEPTION_601=Unable to decode an entry because an \
 unexpected exception was caught during processing: %s
ERR_SEARCH_FILTER_NOT_EXACTLY_ONE_602=The provided search filter "%s" \
 could not be decoded because the NOT filter between positions %d and %d did \
 not contain exactly one filter component
INFO_RESULT_SORT_CONTROL_MISSING_608=Sort Control Missing
INFO_RESULT_OFFSET_RANGE_ERROR_609=Offset Range Error
INFO_RESULT_VIRTUAL_LIST_VIEW_ERROR_610=Virtual List View Error
ERR_CONTROL_INSUFFICIENT_ACCESS_RIGHTS_611=The request control with \
 Object Identifier (OID) "%s" cannot be used due to insufficient access rights
ERR_HOST_PORT_ALREADY_SPECIFIED_612=The connection handler %s is \
 trying to use the listener %s which is already in use by another connection \
 handler
ERR_NOT_AVAILABLE_CONNECTION_HANDLERS_614=No enabled connection \
 handler available
ERR_ERROR_STARTING_CONNECTION_HANDLERS_615=Could not start connection \
 handlers
ERR_BIND_REJECTED_LOCKDOWN_MODE_616=Unable to process the non-root \
 bind because the server is in lockdown mode
WARN_DIRECTORY_SERVER_ENTERING_LOCKDOWN_MODE_617=The Directory Server \
 is entering lockdown mode, in which clients will only be allowed to connect \
 via a loopback address, and only root users will be allowed to process \
 operations
NOTE_DIRECTORY_SERVER_LEAVING_LOCKDOWN_MODE_618=The Directory Server is \
 leaving lockdown mode and will resume normal operation
NOTE_REJECT_OPERATION_IN_LOCKDOWN_MODE_619=Rejecting the requested \
 operation because the server is in lockdown mode and will only accept \
 requests from root users over loopback connections
ERR_COMPRESSEDSCHEMA_UNRECOGNIZED_AD_TOKEN_620=Unable to decode the \
 provided attribute because it used an undefined attribute description token \
 %s
ERR_COMPRESSEDSCHEMA_UNKNOWN_OC_TOKEN_621=Unable to decode the \
 provided object class set because it used an undefined token %s
ERR_COMPRESSEDSCHEMA_CANNOT_WRITE_UPDATED_DATA_622=Unable to write the \
 updated compressed schema token data: %s
ERR_ENTRYENCODECFG_INVALID_LENGTH_623=Unable to decode the provided \
 entry encode configuration element because it has an invalid length
INFO_RESULT_NO_OPERATION_624=No Operation
ERR_SEARCH_FILTER_CREATE_EXTENSIBLE_MATCH_NO_AT_OR_MR_625=Unable to \
 create an extensible match search filter using the provided information \
 because it did not contain either an attribute type or a matching rule ID. \
 At least one of these must be provided
ERR_SEARCH_FILTER_EXTENSIBLE_MATCH_NO_AD_OR_MR_626=The provided search \
 filter "%s" could not be decoded because the extensible match component \
 starting at position %d did not contain either an attribute description or a \
 matching rule ID. At least one of these must be provided
ERR_SEARCH_FILTER_EXTENSIBLE_MATCH_NO_SUCH_MR_627=The provided search \
 filter "%s" could not be decoded because the extensible match component \
 starting at position %d referenced an unknown matching rule %s
ERR_BIND_OPERATION_WRITABILITY_DISABLED_628=Rejecting a bind request for \
 user %s because either the entire server or the user's backend has a \
 writability mode of 'disabled' and password policy state updates would not be \
 allowed
ERR_MODIFY_PW_IN_HISTORY_629=The provided new password was found in the \
 password history for the user
WARN_BIND_MULTIPLE_USER_IDLE_TIME_LIMITS_630=There are multiple \
 user-specific idle time limit values contained in user entry %s. The default \
 server idle time limit will be used
WARN_BIND_CANNOT_PROCESS_USER_IDLE_TIME_LIMIT_631=The user-specific \
 idle time limit value %s contained in user entry %s could not be parsed as an \
 integer. The default server idle time limit will be used
INFO_IDLETIME_LIMIT_EXCEEDED_632=This connection has been terminated because \
 it has remained idle for too long
ERR_PWPOLICY_WARNING_INTERVAL_LARGER_THAN_MAX_AGE_633=The password \
 policy configuration entry "%s" is invalid because if a maximum password age \
 is configured, then the password expiration warning interval must be shorter \
 than the maximum password age
ERR_PWPOLICY_MIN_AGE_PLUS_WARNING_GREATER_THAN_MAX_AGE_634=The \
 password policy configuration entry "%s" is invalid because if both a minimum \
 password age and a maximum password age are configured, then the sum of the \
 minimum password age and the password expiration warning interval must be \
 shorter than the maximum password age
ERR_REGISTER_WORKFLOW_ALREADY_EXISTS_635=Unable to register workflow \
 %s with the Directory Server because another workflow with the same workflow \
 ID is already registered
ERR_REGISTER_WORKFLOW_NODE_ALREADY_EXISTS_636=Unable to register \
 workflow node %s with the network group %s because another workflow node with \
 the same workflow node ID is already registered
ERR_REGISTER_NETWORK_GROUP_ALREADY_EXISTS_637=Unable to register \
 network group %s with the Directory Server because another network group with \
 the same network group ID is already registered
ERR_IDLETIME_DISCONNECT_ERROR_638=An error occurred while attempting to \
 disconnect client connection %d: %s
ERR_IDLETIME_UNEXPECTED_ERROR_639=An unexpected error occurred in the \
 idle time limit thread: %s
ERR_DIRCFG_SERVER_ALREADY_RUNNING_640=The Directory Server is \
 currently running. Environment configuration changes are not allowed with \
 the server running
ERR_DIRCFG_INVALID_SERVER_ROOT_641=The specified server root directory \
 '%s' is invalid. The specified path must exist and must be a directory
ERR_DIRCFG_INVALID_CONFIG_FILE_642=The specified config file path '%s' \
 is invalid. The specified path must exist and must be a file
ERR_DIRCFG_INVALID_CONFIG_CLASS_643=The specified config handler class \
 '%s' is invalid. The specified class must be a subclass of the \
 org.opends.server.api.ConfigHandler superclass
ERR_DIRCFG_INVALID_SCHEMA_DIRECTORY_644=The specified schema \
 configuration directory '%s' is invalid. The specified path must exist and \
 must be a directory
ERR_DIRCFG_INVALID_LOCK_DIRECTORY_645=The specified lock directory \
 '%s' is invalid. The specified path must exist and must be a directory
ERR_DIRCFG_INVALID_CONCURRENCY_LEVEL_646=The specified lock table \
 concurrency level %d is invalid. It must be an integer value greater than \
 zero
ERR_DIRCFG_INVALID_LOCK_TABLE_SIZE_647=The specified initial lock \
 table size %d is invalid. It must be an integer value greater than zero
ERR_CANNOT_SET_ENVIRONMENT_CONFIG_WHILE_RUNNING_648=The Directory \
 Server is currently running. The environment configuration can not be \
 altered while the server is online
ERR_CRYPTOMGR_SSL_CONTEXT_CANNOT_INITIALIZE_649=An error occurred \
 while attempting to initialize a SSL context for server to server \
 communication: %s
ERR_CRYPTOMGR_ADS_TRUST_STORE_BACKEND_NOT_ENABLED_650=The ADS trust \
 store backend %s is not enabled
ERR_CRYPTOMGR_ADS_TRUST_STORE_BACKEND_WRONG_CLASS_651=The backend %s \
 is not a trust store backend
INFO_DSCORE_DESCRIPTION_LASTKNOWNGOODCFG_652=Attempt to start using the \
 configuration that was in place at the last successful startup (if it is \
 available) rather than using the current active configuration
INFO_TRUSTSTORESYNC_ADMIN_SUFFIX_SEARCH_FAILED_653=Error while searching base \
 %s to synchronize the trust store: %s
ERR_TRUSTSTORESYNC_EXCEPTION_654=An error occurred in the trust store \
 synchronization thread: %s
INFO_TRUSTSTORESYNC_ADD_FAILED_655=Error while trying to add entry %s \
 to the trust store: %s
INFO_TRUSTSTORESYNC_DELETE_FAILED_656=Error while trying to delete entry %s \
 from the trust store: %s
ERR_PWPOLICY_SCHEME_DOESNT_SUPPORT_AUTH_657=The password storage \
 scheme defined in configuration entry %s does not support the auth password \
 syntax, which is used by password attribute %s
ERR_PWPOLICY_DEPRECATED_SCHEME_NOT_AUTH_659=Password policy \
 configuration entry %s references deprecated password storage scheme DN %s \
 which does not support the auth password syntax
WARN_GROUP_FILTER_NOT_INDEXED_660=The search filter "%s" used by group \
 implementation %s is not indexed in backend %s. Backend initialization \
 for this group implementation might take a very long time to complete
ERR_CRYPTOMGR_CANNOT_GET_REQUESTED_DIGEST_661=CryptoManager cannot get \
 the requested digest %s: %s
ERR_CRYPTOMGR_CANNOT_GET_REQUESTED_MAC_ENGINE_662=CryptoManager cannot \
 get the requested MAC engine %s: %s
ERR_CRYPTOMGR_CANNOT_GET_REQUESTED_ENCRYPTION_CIPHER_663=CryptoManager \
 cannot get the requested encryption cipher %s: %s
ERR_CRYPTOMGR_CANNOT_GET_PREFERRED_KEY_WRAPPING_CIPHER_664=CryptoManager \
 cannot get the preferred key wrapping cipher: %s
ERR_CRYPTOMGR_FAILED_TO_INITIATE_INSTANCE_KEY_GENERATION_665=CryptoManager \
 failed to add entry "%s" to initiate instance key generation
ERR_CRYPTOMGR_FAILED_TO_RETRIEVE_INSTANCE_CERTIFICATE_666=CryptoManager \
 failed to retrieve entry "%s" (the instance-key-pair public-key-certificate): %s
ERR_CRYPTOMGR_FAILED_TO_COMPUTE_INSTANCE_KEY_IDENTIFIER_667=CryptoManager \
 failed to compute an instance key identifier: %s
ERR_CRYPTOMGR_FAILED_TO_ADD_INSTANCE_KEY_ENTRY_TO_ADS_668=Failed \
 to add entry "%s"
ERR_CRYPTOMGR_FAILED_TO_PUBLISH_INSTANCE_KEY_ENTRY_669=CryptoManager \
 failed to publish the instance-key-pair public-key-certificate entry in ADS: %s
ERR_CRYPTOMGR_FAILED_TO_RETRIEVE_ADS_TRUSTSTORE_CERTS_670=CryptoManager \
 failed to retrieve the collection of instance-key-pair public-key-certificates \
 from ADS container "%s": %s
ERR_CRYPTOMGR_FAILED_TO_ENCODE_SYMMETRIC_KEY_ATTRIBUTE_671=CryptoManager \
 failed to encode symmetric key attribute value: %s
ERR_CRYPTOMGR_DECODE_SYMMETRIC_KEY_ATTRIBUTE_FIELD_COUNT_672=CryptoManager \
 symmetric key attribute value "%s" syntax is invalid: incorrect number of fields
ERR_CRYPTOMGR_DECODE_SYMMETRIC_KEY_ATTRIBUTE_SYNTAX_673=CryptoManager \
 symmetric key attribute value "%s" syntax is invalid. Parsing failed in field \
 "%s" at offset %d
ERR_CRYPTOMGR_DECODE_SYMMETRIC_KEY_ATTRIBUTE_NO_PRIVATE_674=CryptoManager \
 failed to retrieve the instance-key-pair private-key: %s
ERR_CRYPTOMGR_DECODE_SYMMETRIC_KEY_ATTRIBUTE_DECIPHER_675=CryptoManager \
 failed to decipher the wrapped secret-key value: %s
ERR_CRYPTOMGR_REWRAP_SYMMETRIC_KEY_ATTRIBUTE_NO_WRAPPER_676=CryptoManager \
 cannot find the public-key-certificate (identifier "%s") requested for symmetric \
 key re-encoding
ERR_CRYPTOMGR_INVALID_KEY_IDENTIFIER_SYNTAX_677=CryptoManager failed to decode \
 the key entry identifier "%s": %s
ERR_CRYPTOMGR_GET_MAC_ENGINE_INVALID_MAC_ALGORITHM_678=CrytpoManager \
 passed invalid MAC algorithm "%s": %s
ERR_CRYPTOMGR_GET_MAC_ENGINE_CANNOT_INITIALIZE_679=CryptoManager \
 failed to initialize MAC engine: %s
ERR_CRYPTOMGR_GET_CIPHER_INVALID_CIPHER_TRANSFORMATION_680=CryptoManager \
 passed invalid Cipher transformation "%s": %s
ERR_CRYPTOMGR_GET_CIPHER_CANNOT_INITIALIZE_681=CryptoManager \
 cannot initialize Cipher: %s
ERR_CRYPTOMGR_GET_CIPHER_STREAM_PROLOGUE_WRITE_ERROR_682=CryptoManager \
 failed to write the stream prologue: %s
ERR_CRYPTOMGR_DECRYPT_FAILED_TO_READ_KEY_IDENTIFIER_683=CryptoManager \
 failed to decrypt the supplied data because it could not read the symmetric \
 key identifier in the data prologue: %s
ERR_CRYPTOMGR_DECRYPT_UNKNOWN_KEY_IDENTIFIER_684=CryptoManager failed to \
 decrypt the supplied data because the symmetric key identifier in the data \
 prologue does not match any known key entries
ERR_CRYPTOMGR_DECRYPT_FAILED_TO_READ_IV_685=CryptoManager failed to \
 decrypt the supplied data because it could not read the cipher initialization \
 vector in the data prologue
ERR_CRYPTOMGR_DECRYPT_CIPHER_INPUT_STREAM_ERROR_686=CryptoManager failed \
 to decrypt the supplied data because there was an error reading from the \
 input stream: %s
ERR_CRYPTOMGR_IMPORT_KEY_ENTRY_FAILED_TO_DECODE_687=CryptoManager \
 failed to import the symmetric key entry "%s" because it could not obtain a \
 symmetric key attribute value that can be decoded by this instance
ERR_CRYPTOMGR_IMPORT_KEY_ENTRY_FIELD_MISMATCH_688=CryptoManager \
 detected a field mismatch between the key entry to be imported and an entry \
 in the key cache that share the key identifier "%s"
ERR_CRYPTOMGR_IMPORT_KEY_ENTRY_FAILED_OTHER_689=CryptoManager failed \
 to import the symmetric key entry "%s": %s
ERR_CRYPTOMGR_IMPORT_KEY_ENTRY_FAILED_TO_ADD_KEY_690=CryptoManager \
 failed to import the symmetric key entry "%s" because it could not add \
 a symmetric key attribute value that can be decoded by this instance
ERR_CRYPTOMGR_INVALID_SYMMETRIC_KEY_ALGORITHM_691=CryptoManager failed \
 to instantiate a KeyGenerator for algorithm "%s": %s
ERR_CRYPTOMGR_SYMMETRIC_KEY_ENTRY_ADD_FAILED_692=CryptoManager failed \
 to add locally produced symmetric key entry "%s": %s
ERR_CRYPTOMGR_FULL_CIPHER_TRANSFORMATION_REQUIRED_693=CryptoManager \
 cipher transformation specification "%s" is invalid: it must be of the form \
 "algorithm/mode/padding"
ERR_CRYPTOMGR_FULL_KEY_WRAPPING_TRANSFORMATION_REQUIRED_694=CryptoManager \
 cipher transformation specification "%s" is invalid: it must be of the form \
 "algorithm/mode/padding"
ERR_CRYPTOMGR_DECRYPT_FAILED_TO_READ_PROLOGUE_VERSION_695=CryptoManager \
 failed to decrypt the supplied data because it could not read the version \
 number in the data prologue: %s
ERR_CRYPTOMGR_DECRYPT_UNKNOWN_PROLOGUE_VERSION_696=CryptoManager failed to \
 decrypt the supplied data because the version "%d" in the data prologue is \
 unknown
ERR_ADD_ENTRY_UNKNOWN_SUFFIX_697=The provided entry %s cannot be added \
 because its suffix is not defined as one of the suffixes within the \
 Directory Server
NOTE_VERSION_698=%s
NOTE_BUILD_ID_699=Build ID:                 %s
ERR_CANNOT_CANCEL_START_TLS_700=Start TLS extended operations cannot be \
 canceled
ERR_CANNOT_CANCEL_CANCEL_701=Cancel extended operations can not be \
 canceled
ERR_MODDN_NEW_SUPERIOR_IN_SUBTREE_702=The modify DN operation \
 for entry %s cannot be performed because the new superior entry %s is equal \
 to or a subordinate of the entry to be moved
ERR_REGISTER_WORKFLOW_ELEMENT_ALREADY_EXISTS_703=Unable to register \
 workflow element %s with the Directory Server because another workflow \
 element with the same ID is already registered
INFO_ERROR_MAX_CONNECTIONS_LIMIT_EXCEEDED_704=Unable to process operation \
 because the network group has already reached its maximum number of \
 simultaneous connections
INFO_ERROR_MAX_CONNECTIONS_FROM_SAME_IP_LIMIT_EXCEEDED_705=Unable to process \
 operation because the network group has already reached its maximum number \
 of simultaneous connections from the same client
INFO_ERROR_MAX_OPERATIONS_PER_CONNECTION_LIMIT_EXCEEDED_706=Unable to process \
 operation because the network group has already reached its maximum number \
 of operations on this connection
INFO_ERROR_MAX_CONCURRENT_OPERATIONS_PER_CONNECTION_LIMIT_EXCEEDED_707=Unable \
 to process operation because the network group has already reached its \
 maximum number of concurrent operations on this connection
INFO_CHANGE_NETWORK_GROUP_708=Connection ConnID=%d moved from network group %s \
 to %s
INFO_ERROR_MIN_SEARCH_SUBSTRING_LENGTH_LIMIT_EXCEEDED_709=Unable to process \
 operation because the search substring length is less than the network \
 group minimum search substring length
INFO_ERROR_OPERATION_NOT_ALLOWED_710=Unable to process operation because this \
 type of operation is not allowed in this network group
INFO_ERROR_ATTRIBUTE_NOT_ALLOWED_711=Unable to process operation because this \
 attribute is not allowed in this network group
INFO_ERROR_SEARCH_SCOPE_NOT_ALLOWED_712=Unable to process operation because \
 this search scope is not allowed in this network group
INFO_ERROR_SUBTREE_NOT_ALLOWED_713=Unable to process operation because this \
 subtree is not allowed in this network group
ERR_ROOT_WORKFLOW_ELEMENT_NOT_DEFINED_714=The workflow %s cannot \
process the operation because no root workflow element has been \
registered with the workflow
ERR_ADD_ATTR_IS_INVALID_OPTION_715=Entry %s can not be added because \
 BER encoding of %s attribute is not supported
ERR_REGISTER_WORKFLOW_BASE_DN_ALREADY_EXISTS_716=Unable to register \
 workflow node "%s" with the network group "%s" because another workflow node \
 "%s" with the same base DN "%s" is already registered
INFO_ERR_WORKFLOW_IN_USE_717=\
Unable to remove the workflow "%s" because the workflow is still in use \
(there are still %d reference(s) to the workflow)
INFO_ERR_WORKFLOW_DOES_NOT_EXIST_718=\
Unable to register the workflow "%s" with the network group %s because \
the workflow does not exist
ERR_WORKFLOW_BASE_DN_DUPLICATED_IN_NG_719=\
Unable to register the workflow because the base DN '%s' is already \
registered with the network group '%s'
INFO_ERGONOMIC_SIZING_OF_WORKER_THREAD_POOL_720=No worker queue thread \
pool size specified: sizing automatically to use %d threads
ERR_CRYPTOMGR_FAILED_INSTANCE_CERTIFICATE_NULL_721=The CryptoManager \
entry "%s" (the instance-key-pair public-key-certificate) does not contain \
a public-key certificate
INFO_DSCORE_DESCRIPTION_TIMEOUT_722=Maximum time (in seconds) to wait before \
the command returns (the server continues the startup process, regardless). \
A value of '0' indicates an infinite timeout, which means that the command \
returns only when the server startup is completed. The default value is \
60 seconds. This option cannot be used with the -N, --nodetach option
ERR_DSCORE_ERROR_NODETACH_TIMEOUT_723=In no-detach mode, the 'timeout' \
option cannot be used
WARN_SUBENTRY_FILTER_NOT_INDEXED_724=The search filter "%s" used by \
 subentry manager is not indexed in backend %s. Backend initialization \
 for subentry manager processing might take a very long time to complete
INFO_RESULT_UNDEFINED_725=Undefined
ERR_PWPOLICY_NO_PWDPOLICY_OC_726=The entry %s does not contain the \
 pwdPolicy objectclass, which is required for Directory Server password policy
ERR_RDN_MISSING_ATTRIBUTE_VALUE_727=Unable to decode the provided string "%s" \
 as a relative distinguished name because it does not contain a value \
 for attribute type %s
ERR_CRYPTOMGR_INVALID_SYMMETRIC_KEY_LENGTH_728=CryptoManager failed to \
 initialize because the specified cipher key length "%d" is beyond the \
 allowed cryptography strength "%d" in jurisdiction policy files
ERR_DISK_SPACE_MONITOR_UPDATE_FAILED_729=Failed to update free disk space \
 for directory %s: %s
ERR_MAX_PSEARCH_LIMIT_EXCEEDED_730=The directory server is not accepting \
 a new persistent search request because the server has already reached its limit
INFO_ERROR_MAX_THROUGHPUT_EXCEEDED_735=Unable to process operation \
 because the network group has already reached its maximum throughput of %d \
 operations each %d ms
ERR_MAX_OPS_PER_INTERVAL_738=The value "%d" is not a valid value for \
the maximum number of operations per interval (must be positive)
ERR_SUBENTRY_WRITE_INSUFFICIENT_PRIVILEGES_739=This operation involves \
 LDAP subentries which you do not have sufficient privileges to administer
WARN_OP_REJECTED_BY_QUEUE_INTERRUPT_740=The request to process this \
 operation has been rejected because request handler thread was interrupted \
 while attempting to put the operation on the work queue
INFO_DISCONNECT_DUE_TO_INVALID_CREDENTIALS_741=Invalid Credentials
WARN_ADD_OP_INVALID_SYNTAX_NO_VALUE_742=Entry "%s" contains a value for \
 attribute %s that is invalid according to the syntax for that attribute: %s
ERR_MODIFY_ADD_INVALID_SYNTAX_NO_VALUE_743=When attempting to modify entry \
 %s, one value for attribute %s was found to be invalid according to the \
 associated syntax: %s
ERR_MODIFY_REPLACE_INVALID_SYNTAX_NO_VALUE_744=When attempting to modify \
 entry %s to replace the set of values for attribute %s, one value was found to \
 be invalid according to the associated syntax: %s
ERR_PWPOLICY_UNKNOWN_VALIDATOR_745=The password policy \
definition contained in configuration entry "%s" is invalid because the \
password validator "%s" specified in attribute "%s" cannot be found
ERR_PWPOLICY_REJECT_DUE_TO_UNKNOWN_VALIDATOR_REASON_746=The password could not \
 be validated because of misconfiguration. Please contact the administrator
ERR_PWPOLICY_REJECT_DUE_TO_UNKNOWN_VALIDATOR_LOG_747=The password for \
 user %s could not be validated because the password policy subentry %s is \
 referring to an unknown password validator (%s). Please make sure the password \
 policy subentry only refers to validators that exist on all replicas
ERR_DISK_SPACE_GET_MOUNT_POINT_748=Could not get filesystem for directory %s: %s
ERR_DISK_SPACE_LOW_THRESHOLD_REACHED_749=The disk containing directory %s used by %s is low on free space \
 (%d bytes free). Write operations are only permitted by a user with the BYPASS_LOCKDOWN privilege until the free \
 space rises above the threshold. Replication updates are still allowed
ERR_DISK_SPACE_FULL_THRESHOLD_REACHED_750=The disk containing directory %s used by %s is full (%d bytes free). \
 Write operations to the backend, replication updates included, will fail until the free space rises above the threshold
NOTE_DISK_SPACE_RESTORED_751=The free space (%d bytes) on the disk containing directory %s is now above the \
 threshold