# # CDDL HEADER START # # The contents of this file are subject to the terms of the # Common Development and Distribution License, Version 1.0 only # (the "License"). You may not use this file except in compliance # with the License. # # You can obtain a copy of the license at legal-notices/CDDLv1_0.txt # or http://forgerock.org/license/CDDLv1.0.html. # See the License for the specific language governing permissions # and limitations under the License. # # When distributing Covered Code, include this CDDL HEADER in each # file and include the License file at legal-notices/CDDLv1_0.txt. # If applicable, add the following below this CDDL HEADER, with the # fields enclosed by brackets "[]" replaced with your own identifying # information: # Portions Copyright [yyyy] [name of copyright owner] # # CDDL HEADER END # # # Copyright 2014 ForgeRock AS. # # # CLI messages # ERR_ARG_NO_IDENTIFIER=The %s argument does not have either a \ single-character or a long identifier that may be used to specify it. At \ least one of these must be specified for each argument ERR_ARG_NO_VALUE_PLACEHOLDER=The %s argument is configured to take \ a value but no value placeholder has been defined for it ERR_ARG_NO_INT_VALUE=The %s argument does not have any value that \ may be retrieved as an integer ERR_ARG_CANNOT_DECODE_AS_INT=The provided value "%s" for the %s \ argument cannot be decoded as an integer ERR_ARG_INT_MULTIPLE_VALUES=The %s argument has multiple values and \ therefore cannot be decoded as a single integer value ERR_ARG_NO_BOOLEAN_VALUE=The %s argument does not have any value \ that may be retrieved as a Boolean ERR_ARG_CANNOT_DECODE_AS_BOOLEAN=The provided value "%s" for the %s \ argument cannot be decoded as a Boolean ERR_ARG_BOOLEAN_MULTIPLE_VALUES=The %s argument has multiple values \ and therefore cannot be decoded as a single Boolean value ERR_INTARG_LOWER_BOUND_ABOVE_UPPER_BOUND=The %s argument \ configuration is invalid because the lower bound of %d is greater than the \ upper bound of %d ERR_INTARG_VALUE_BELOW_LOWER_BOUND=The provided %s value %d is \ unacceptable because it is below the lower bound of %d ERR_INTARG_VALUE_ABOVE_UPPER_BOUND=The provided %s value %d is \ unacceptable because it is above the upper bound of %d ERR_BOOLEANARG_NO_VALUE_ALLOWED=The provided %s value is \ unacceptable because Boolean arguments are never allowed to have values ERR_MCARG_VALUE_NOT_ALLOWED=The provided %s value %s is \ unacceptable because it is not included in the set of allowed values for that \ argument ERR_FILEARG_NO_SUCH_FILE=The file %s specified for argument %s does \ not exist ERR_FILEARG_CANNOT_VERIFY_FILE_EXISTENCE=An error occurred while \ trying to verify the existence of file %s specified for argument %s: %s ERR_FILEARG_CANNOT_OPEN_FILE=An error occurred while trying to open \ file %s specified for argument %s for reading: %s ERR_FILEARG_CANNOT_READ_FILE=An error occurred while trying to read \ from file %s specified for argument %s: %s ERR_FILEARG_EMPTY_FILE=The file %s specified for argument %s exists \ but is empty ERR_ARGPARSER_DUPLICATE_SHORT_ID=Cannot add argument %s to the \ argument list because its short identifier -%s conflicts with the %s argument \ that has already been defined ERR_ARGPARSER_DUPLICATE_LONG_ID=Cannot add argument %s to the \ argument list because its long identifier --%s conflicts with the %s argument \ that has already been defined ERR_ARGPARSER_CANNOT_READ_PROPERTIES_FILE=An error occurred while \ attempting to read the contents of the argument properties file %s: %s ERR_ARGPARSER_TOO_MANY_TRAILING_ARGS=The provided set of \ command-line arguments contained too many unnamed trailing arguments. The \ maximum number of allowed trailing arguments is %d ERR_ARGPARSER_LONG_ARG_WITHOUT_NAME=The provided argument "%s" is \ invalid because it does not include the argument name ERR_ARGPARSER_NO_ARGUMENT_WITH_LONG_ID=Argument --%s is not allowed \ for use with this program ERR_ARGPARSER_NO_VALUE_FOR_ARGUMENT_WITH_LONG_ID=Argument --%s \ requires a value but none was provided ERR_ARGPARSER_VALUE_UNACCEPTABLE_FOR_LONG_ID=The provided value \ "%s" for argument --%s is not acceptable: %s ERR_ARGPARSER_NOT_MULTIVALUED_FOR_LONG_ID=The argument --%s was \ included multiple times in the provided set of arguments but it does not \ allow multiple values ERR_ARGPARSER_ARG_FOR_LONG_ID_DOESNT_TAKE_VALUE=A value was \ provided for argument --%s but that argument does not take a value ERR_ARGPARSER_INVALID_DASH_AS_ARGUMENT=The dash character by itself \ is invalid for use as an argument name ERR_ARGPARSER_NO_ARGUMENT_WITH_SHORT_ID=Argument -%s is not allowed \ for use with this program ERR_ARGPARSER_NO_VALUE_FOR_ARGUMENT_WITH_SHORT_ID=Argument -%s \ requires a value but none was provided ERR_ARGPARSER_VALUE_UNACCEPTABLE_FOR_SHORT_ID=The provided value \ "%s" for argument -%s is not acceptable: %s ERR_ARGPARSER_NOT_MULTIVALUED_FOR_SHORT_ID=The argument -%s was \ included multiple times in the provided set of arguments but it does not \ allow multiple values ERR_ARGPARSER_CANT_MIX_ARGS_WITH_VALUES=The provided argument block \ '-%s%s' is illegal because the '%s' argument requires a value but is in the \ same block as at least one other argument that doesn't require a value ERR_ARGPARSER_DISALLOWED_TRAILING_ARGUMENT=Argument "%s" does not \ start with one or two dashes and unnamed trailing arguments are not allowed ERR_ARGPARSER_TOO_FEW_TRAILING_ARGUMENTS=At least %d unnamed \ trailing arguments are required in the argument list, but too few were \ provided ERR_ARGPARSER_NO_VALUE_FOR_REQUIRED_ARG=The argument %s is required \ to have a value but none was provided in the argument list and no default \ value is available INFO_TIME_IN_SECONDS=%d seconds INFO_TIME_IN_MINUTES_SECONDS=%d minutes, %d seconds INFO_TIME_IN_HOURS_MINUTES_SECONDS=%d hours, %d minutes, %d seconds INFO_TIME_IN_DAYS_HOURS_MINUTES_SECONDS=%d days, %d hours, %d minutes, %d \ seconds INFO_SUBCMDPARSER_WHERE_OPTIONS_INCLUDE=Command options: ERR_MENU_BAD_CHOICE_SINGLE=Invalid response. Please enter a valid \ menu option INFO_MENU_PROMPT_SINGLE=Enter choice: INFO_MENU_PROMPT_RETURN_TO_CONTINUE=Press RETURN to continue ERR_CONSOLE_INPUT_ERROR=The response could not be read from the console due to the following error: %s INFO_LDAP_CONN_PROMPT_SECURITY_SERVER_CERTIFICATE=Server Certificate: INFO_LDAP_CONN_SECURITY_SERVER_CERTIFICATE=%s INFO_LDAP_CONN_PROMPT_SECURITY_TRUST_OPTION=Do you trust this server certificate? INFO_LDAP_CONN_PROMPT_SECURITY_TRUST_OPTION_NO=No INFO_LDAP_CONN_PROMPT_SECURITY_TRUST_OPTION_SESSION=Yes, for this session only INFO_LDAP_CONN_PROMPT_SECURITY_TRUST_OPTION_ALWAYS=Yes, also add it to a truststore INFO_LDAP_CONN_PROMPT_SECURITY_CERTIFICATE_DETAILS=View certificate details INFO_LDAP_CONN_SECURITY_SERVER_CERTIFICATE_USER_DN=User DN : %s INFO_LDAP_CONN_SECURITY_SERVER_CERTIFICATE_VALIDITY=Validity : From '%s'%n To '%s' INFO_LDAP_CONN_SECURITY_SERVER_CERTIFICATE_ISSUER=Issuer : %s INFO_PROMPT_SINGLE_DEFAULT=%s [%s]: INFO_ARGPARSER_USAGE_JAVA_CLASSNAME=Usage: java %s {options} INFO_ARGPARSER_USAGE_JAVA_SCRIPTNAME=Usage: %s {options} INFO_ARGPARSER_USAGE_TRAILINGARGS={trailing-arguments} INFO_ARGPARSER_USAGE_DEFAULT_VALUE=Default value: %s # # Extension messages # # # Tools messages # ERR_CANNOT_INITIALIZE_ARGS=An unexpected error occurred while \ attempting to initialize the command-line arguments: %s ERR_ERROR_PARSING_ARGS=An error occurred while parsing the \ command-line arguments: %s INFO_PROCESSING_OPERATION=Processing %s request for %s INFO_OPERATION_FAILED=%s operation failed INFO_OPERATION_SUCCESSFUL=%s operation successful for DN %s INFO_PROCESSING_COMPARE_OPERATION=Comparing type %s with value %s in \ entry %s INFO_COMPARE_OPERATION_RESULT_FALSE=Compare operation returned false for \ entry %s INFO_COMPARE_OPERATION_RESULT_TRUE=Compare operation returned true for \ entry %s INFO_DESCRIPTION_TRUSTALL=Trust all server SSL certificates INFO_DESCRIPTION_BINDDN=DN to use to bind to the server INFO_DESCRIPTION_BINDPASSWORD=Password to use to bind to \ the server INFO_DESCRIPTION_BINDPASSWORDFILE=Bind password file INFO_DESCRIPTION_ENCODING=Use the specified character set for \ command-line input INFO_DESCRIPTION_VERBOSE=Use verbose mode INFO_DESCRIPTION_KEYSTOREPATH=Certificate key store path INFO_DESCRIPTION_TRUSTSTOREPATH=Certificate trust store path INFO_DESCRIPTION_KEYSTOREPASSWORD=Certificate key store PIN INFO_DESCRIPTION_HOST=Directory server hostname or IP address INFO_DESCRIPTION_PORT=Directory server port number INFO_DESCRIPTION_SHOWUSAGE=Display this usage information INFO_DESCRIPTION_CONTROLS=Use a request control with the provided \ information INFO_DESCRIPTION_CONTINUE_ON_ERROR=Continue processing even if there are \ errors INFO_DESCRIPTION_USE_SSL=Use SSL for secure communication with the server INFO_DESCRIPTION_START_TLS=Use StartTLS to secure communication with the \ server INFO_MODIFY_DESCRIPTION_DEFAULT_ADD=Treat records with no changetype as \ add operations INFO_SEARCH_DESCRIPTION_BASEDN=Search base DN INFO_SEARCH_DESCRIPTION_SIZE_LIMIT=Maximum number of entries to return \ from the search INFO_SEARCH_DESCRIPTION_TIME_LIMIT=Maximum length of time in seconds to \ allow for the search INFO_SEARCH_DESCRIPTION_SEARCH_SCOPE=Search scope ('base', 'one', 'sub', \ or 'subordinate') INFO_SEARCH_DESCRIPTION_DEREFERENCE_POLICY=Alias dereference policy \ ('never', 'always', 'search', or 'find') ERR_LDAPAUTH_UNSUPPORTED_SASL_MECHANISM=The requested SASL mechanism \ "%s" is not supported by this client ERR_LDAPAUTH_SASL_AUTHID_REQUIRED=The "authid" SASL property is \ required for use with the %s mechanism INFO_DESCRIPTION_VERSION=LDAP protocol version number ERR_DESCRIPTION_INVALID_VERSION=Invalid LDAP version number '%s'. \ Allowed values are 2 and 3 ERR_SEARCH_NO_FILTERS=No filters specified for the search request INFO_DESCRIPTION_DONT_WRAP=Do not wrap long lines INFO_DESCRIPTION_NOOP=Show what would be done but do not perform any \ operation INFO_DESCRIPTION_TYPES_ONLY=Only retrieve attribute names but not their \ values INFO_DESCRIPTION_ASSERTION_FILTER=Use the LDAP assertion control with the \ provided filter ERR_LDAP_ASSERTION_INVALID_FILTER=The search filter provided for the \ LDAP assertion control was invalid: %s INFO_DESCRIPTION_PREREAD_ATTRS=Use the LDAP ReadEntry pre-read control INFO_DESCRIPTION_POSTREAD_ATTRS=Use the LDAP ReadEntry post-read control INFO_LDAPMODIFY_PREREAD_ENTRY=Target entry before the operation: INFO_LDAPMODIFY_POSTREAD_ENTRY=Target entry after the operation: INFO_DESCRIPTION_PROXY_AUTHZID=Use the proxied authorization control with \ the given authorization ID INFO_DESCRIPTION_PSEARCH_INFO=Use the persistent search control ERR_PSEARCH_MISSING_DESCRIPTOR=The request to use the persistent \ search control did not include a descriptor that indicates the options to use \ with that control ERR_PSEARCH_DOESNT_START_WITH_PS=The persistent search descriptor %s \ did not start with the required 'ps' string ERR_PSEARCH_INVALID_CHANGE_TYPE=The provided change type value %s is \ invalid. The recognized change types are add, delete, modify, modifydn, and \ any ERR_PSEARCH_INVALID_CHANGESONLY=The provided changesOnly value %s is \ invalid. Allowed values are 1 to only return matching entries that have \ changed since the beginning of the search, or 0 to also include existing \ entries that match the search criteria ERR_PSEARCH_INVALID_RETURN_ECS=The provided returnECs value %s is \ invalid. Allowed values are 1 to request that the entry change notification \ control be included in updated entries, or 0 to exclude the control from \ matching entries INFO_DESCRIPTION_REPORT_AUTHZID=Use the authorization identity control INFO_BIND_AUTHZID_RETURNED=# Bound with authorization ID %s INFO_SEARCH_DESCRIPTION_FILENAME=File containing a list of search filter \ strings INFO_DESCRIPTION_MATCHED_VALUES_FILTER=Use the LDAP matched values \ control with the provided filter ERR_LDAP_MATCHEDVALUES_INVALID_FILTER=The provided matched values \ filter was invalid: %s ERR_LDIF_FILE_CANNOT_OPEN_FOR_READ=An error occurred while \ attempting to open the LDIF file %s for reading: %s ERR_LDIF_FILE_CANNOT_OPEN_FOR_WRITE=An error occurred while \ attempting to open the LDIF file %s for writing: %s ERR_LDIF_FILE_READ_ERROR=An error occurred while attempting to read \ the contents of LDIF file %s: %s INFO_BIND_PASSWORD_EXPIRED=# Your password has expired INFO_BIND_PASSWORD_EXPIRING=# Your password will expire in %s INFO_BIND_ACCOUNT_LOCKED=# Your account has been locked INFO_BIND_MUST_CHANGE_PASSWORD=# You must change your password before any \ other operations will be allowed INFO_BIND_GRACE_LOGINS_REMAINING=# You have %d grace logins remaining INFO_DESCRIPTION_USE_PWP_CONTROL=Use the password policy request control INFO_LDAPPWMOD_DESCRIPTION_AUTHZID=Authorization ID for the \ user entry whose password should be changed INFO_LDAPPWMOD_DESCRIPTION_NEWPW=New password to provide \ for the target user INFO_LDAPPWMOD_DESCRIPTION_NEWPWFILE=Path to a file \ containing the new password to provide for the target user INFO_LDAPPWMOD_DESCRIPTION_CURRENTPW=Current password for \ the target user INFO_LDAPPWMOD_DESCRIPTION_CURRENTPWFILE=Path to a file \ containing the current password for the target user ERR_LDAPPWMOD_CONFLICTING_ARGS=The %s and %s arguments may not be \ provided together ERR_LDAPPWMOD_FAILED=The LDAP password modify operation failed: \ %d (%s) ERR_LDAPPWMOD_FAILURE_ERROR_MESSAGE=Error Message: %s ERR_LDAPPWMOD_FAILURE_MATCHED_DN=Matched DN: %s INFO_LDAPPWMOD_SUCCESSFUL=The LDAP password modify operation was \ successful INFO_LDAPPWMOD_ADDITIONAL_INFO=Additional Info: %s INFO_LDAPPWMOD_GENERATED_PASSWORD=Generated Password: %s INFO_COMPARE_CANNOT_BASE64_DECODE_ASSERTION_VALUE=The assertion value was \ indicated to be base64-encoded, but an error occurred while trying to decode \ the value INFO_COMPARE_CANNOT_READ_ASSERTION_VALUE_FROM_FILE=Unable to read the \ assertion value from the specified file: %s ERR_LDAPCOMPARE_NO_DNS=No entry DNs provided for the compare \ operation INFO_LDAPCOMPARE_TOOL_DESCRIPTION=This utility can be used to perform \ LDAP compare operations in the Directory Server INFO_LDAPMODIFY_TOOL_DESCRIPTION=This utility can be used to perform LDAP \ modify, add, delete, and modify DN operations in the Directory Server INFO_LDAPPWMOD_TOOL_DESCRIPTION=This utility can be used to perform LDAP \ password modify operations in the Directory Server INFO_LDAPSEARCH_TOOL_DESCRIPTION=This utility can be used to perform LDAP \ search operations in the Directory Server ERR_TOOL_CONFLICTING_ARGS=You may not provide both the --%s and \ the --%s arguments ERR_LDAPCOMPARE_NO_ATTR=No attribute was specified to use as the \ target for the comparison ERR_LDAPCOMPARE_INVALID_ATTR_STRING=Invalid attribute string '%s'. \ The attribute string must be in one of the following forms: \ 'attribute:value', 'attribute::base64value', or 'attribute: