#
# CDDL HEADER START
#
# The contents of this file are subject to the terms of the
# Common Development and Distribution License, Version 1.0 only
# (the "License").  You may not use this file except in compliance
# with the License.
#
# You can obtain a copy of the license at legal-notices/CDDLv1_0.txt
# or http://forgerock.org/license/CDDLv1.0.html.
# See the License for the specific language governing permissions
# and limitations under the License.
#
# When distributing Covered Code, include this CDDL HEADER in each
# file and include the License file at legal-notices/CDDLv1_0.txt.
# If applicable, add the following below this CDDL HEADER, with the
# fields enclosed by brackets "[]" replaced with your own identifying
# information:
#      Portions Copyright [yyyy] [name of copyright owner]
#
# CDDL HEADER END
#
#
#      Copyright 2014-2015 ForgeRock AS.
#
#
# CLI messages
#
ERR_ARG_NO_IDENTIFIER=The %s argument does not have either a \
 single-character or a long identifier that may be used to specify it.  At \
 least one of these must be specified for each argument
ERR_ARG_NO_VALUE_PLACEHOLDER=The %s argument is configured to take \
 a value but no value placeholder has been defined for it
ERR_ARG_NO_INT_VALUE=The %s argument does not have any value that \
 may be retrieved as an integer
ERR_ARG_CANNOT_DECODE_AS_INT=The provided value "%s" for the %s \
 argument cannot be decoded as an integer
ERR_ARG_INT_MULTIPLE_VALUES=The %s argument has multiple values and \
 therefore cannot be decoded as a single integer value
ERR_ARG_NO_DOUBLE_VALUE=The %s argument does not have any value that \
 may be retrieved as a double
ERR_ARG_CANNOT_DECODE_AS_DOUBLE=The provided value "%s" for the %s \
 argument cannot be decoded as a double
ERR_ARG_DOUBLE_MULTIPLE_VALUES=The %s argument has multiple values and \
 therefore cannot be decoded as a single double value
ERR_ARG_NO_BOOLEAN_VALUE=The %s argument does not have any value \
 that may be retrieved as a Boolean
ERR_ARG_CANNOT_DECODE_AS_BOOLEAN=The provided value "%s" for the %s \
 argument cannot be decoded as a Boolean
ERR_ARG_BOOLEAN_MULTIPLE_VALUES=The %s argument has multiple values \
 and therefore cannot be decoded as a single Boolean value
ERR_INTARG_LOWER_BOUND_ABOVE_UPPER_BOUND=The %s argument \
 configuration is invalid because the lower bound of %d is greater than the \
 upper bound of %d
ERR_INTARG_VALUE_BELOW_LOWER_BOUND=The provided %s value %d is \
 unacceptable because it is below the lower bound of %d
ERR_INTARG_VALUE_ABOVE_UPPER_BOUND=The provided %s value %d is \
 unacceptable because it is above the upper bound of %d
ERR_BOOLEANARG_NO_VALUE_ALLOWED=The provided %s value is \
 unacceptable because Boolean arguments are never allowed to have values
ERR_MCARG_VALUE_NOT_ALLOWED=The provided %s value %s is \
 unacceptable because it is not included in the set of allowed values for that \
 argument
ERR_FILEARG_NO_SUCH_FILE=The file %s specified for argument %s does \
 not exist
ERR_FILEARG_CANNOT_VERIFY_FILE_EXISTENCE=An error occurred while \
 trying to verify the existence of file %s specified for argument %s:  %s
ERR_FILEARG_CANNOT_OPEN_FILE=An error occurred while trying to open \
 file %s specified for argument %s for reading:  %s
ERR_FILEARG_CANNOT_READ_FILE=An error occurred while trying to read \
 from file %s specified for argument %s:  %s
ERR_FILEARG_EMPTY_FILE=The file %s specified for argument %s exists \
 but is empty
ERR_ARGPARSER_DUPLICATE_SHORT_ID=Cannot add argument %s to the \
 argument list because its short identifier -%s conflicts with the %s argument \
 that has already been defined
ERR_ARGPARSER_DUPLICATE_LONG_ID=Cannot add argument %s to the \
 argument list because its long identifier --%s conflicts with the %s argument \
 that has already been defined
ERR_ARGPARSER_CANNOT_READ_PROPERTIES_FILE=An error occurred while \
 attempting to read the contents of the argument properties file %s:  %s
ERR_ARGPARSER_TOO_MANY_TRAILING_ARGS=The provided set of \
 command-line arguments contained too many unnamed trailing arguments.  The \
 maximum number of allowed trailing arguments is %d
ERR_ARGPARSER_LONG_ARG_WITHOUT_NAME=The provided argument "%s" is \
 invalid because it does not include the argument name
ERR_ARGPARSER_NO_ARGUMENT_WITH_LONG_ID=Argument --%s is not allowed \
 for use with this program
ERR_ARGPARSER_NO_VALUE_FOR_ARGUMENT_WITH_LONG_ID=Argument --%s \
 requires a value but none was provided
ERR_ARGPARSER_VALUE_UNACCEPTABLE_FOR_LONG_ID=The provided value \
 "%s" for argument --%s is not acceptable:  %s
ERR_ARGPARSER_NOT_MULTIVALUED_FOR_LONG_ID=The argument --%s was \
 included multiple times in the provided set of arguments but it does not \
 allow multiple values
ERR_ARGPARSER_ARG_FOR_LONG_ID_DOESNT_TAKE_VALUE=A value was \
 provided for argument --%s but that argument does not take a value
ERR_ARGPARSER_INVALID_DASH_AS_ARGUMENT=The dash character by itself \
 is invalid for use as an argument name
ERR_ARGPARSER_NO_ARGUMENT_WITH_SHORT_ID=Argument -%s is not allowed \
 for use with this program
ERR_ARGPARSER_NO_VALUE_FOR_ARGUMENT_WITH_SHORT_ID=Argument -%s \
 requires a value but none was provided
ERR_ARGPARSER_VALUE_UNACCEPTABLE_FOR_SHORT_ID=The provided value \
 "%s" for argument -%s is not acceptable:  %s
ERR_ARGPARSER_NOT_MULTIVALUED_FOR_SHORT_ID=The argument -%s was \
 included multiple times in the provided set of arguments but it does not \
 allow multiple values
ERR_ARGPARSER_CANT_MIX_ARGS_WITH_VALUES=The provided argument block \
 '-%s%s' is illegal because the '%s' argument requires a value but is in the \
 same block as at least one other argument that does not require a value
ERR_ARGPARSER_DISALLOWED_TRAILING_ARGUMENT=Argument "%s" does not \
 start with one or two dashes and unnamed trailing arguments are not allowed
ERR_ARGPARSER_TOO_FEW_TRAILING_ARGUMENTS=At least %d unnamed \
 trailing arguments are required in the argument list, but too few were \
 provided
ERR_ARGPARSER_NO_VALUE_FOR_REQUIRED_ARG=The argument %s is required \
 to have a value but none was provided in the argument list and no default \
 value is available
INFO_TIME_IN_SECONDS=%d seconds
INFO_TIME_IN_MINUTES_SECONDS=%d minutes, %d seconds
INFO_TIME_IN_HOURS_MINUTES_SECONDS=%d hours, %d minutes, %d seconds
INFO_TIME_IN_DAYS_HOURS_MINUTES_SECONDS=%d days, %d hours, %d minutes, %d \
 seconds
INFO_SUBCMDPARSER_WHERE_OPTIONS_INCLUDE=Command options:
ERR_MENU_BAD_CHOICE_SINGLE=Invalid response. Please enter a valid \
menu option
INFO_MENU_PROMPT_SINGLE=Enter choice:
INFO_MENU_PROMPT_RETURN_TO_CONTINUE=Press RETURN to continue
ERR_CONSOLE_INPUT_ERROR=The response could not be read from the console due to the following error: %s
INFO_LDAP_CONN_PROMPT_SECURITY_SERVER_CERTIFICATE=Server Certificate:
INFO_LDAP_CONN_SECURITY_SERVER_CERTIFICATE=%s
INFO_LDAP_CONN_PROMPT_SECURITY_TRUST_OPTION=Do you trust this server certificate?
INFO_LDAP_CONN_PROMPT_SECURITY_TRUST_OPTION_NO=No
INFO_LDAP_CONN_PROMPT_SECURITY_TRUST_OPTION_SESSION=Yes, for this session only
INFO_LDAP_CONN_PROMPT_SECURITY_TRUST_OPTION_ALWAYS=Yes, also add it to a truststore
INFO_LDAP_CONN_PROMPT_SECURITY_CERTIFICATE_DETAILS=View certificate details
INFO_LDAP_CONN_SECURITY_SERVER_CERTIFICATE_USER_DN=User DN  : %s
INFO_LDAP_CONN_SECURITY_SERVER_CERTIFICATE_VALIDITY=Validity : From '%s'%n             To '%s'
INFO_LDAP_CONN_SECURITY_SERVER_CERTIFICATE_ISSUER=Issuer   : %s
INFO_PROMPT_SINGLE_DEFAULT=%s [%s]:
INFO_ARGPARSER_USAGE_JAVA_CLASSNAME=Usage:  java %s  {options}
INFO_ARGPARSER_USAGE_JAVA_SCRIPTNAME=Usage:  %s  {options}
INFO_ARGPARSER_USAGE_TRAILINGARGS={trailing-arguments}
INFO_ARGPARSER_USAGE_DEFAULT_VALUE=Default value: %s
INFO_SUBCMDPARSER_OPTIONS={options}
INFO_GLOBAL_OPTIONS=Global Options:
INFO_GLOBAL_OPTIONS_REFERENCE=See "%s --help"
INFO_GLOBAL_HELP_REFERENCE=See "%s --help" to get more usage help
INFO_SUBCMD_OPTIONS=SubCommand Options:
INFO_ARGPARSER_USAGE=Usage:
INFO_SUBCMDPARSER_SUBCMD_AND_OPTIONS={subcommand} {options}
INFO_SUBCMDPARSER_SUBCMD_HELP_HEADING=To get the list of subcommands use:
INFO_SUBCMDPARSER_SUBCMD_HEADING=Available subcommands:
ERR_ARG_SUBCOMMAND_INVALID=Invalid subcommand
INFO_SUBCMDPARSER_GLOBAL_HEADING=The global options are:
#
# Extension messages
#
#
# Tools messages
#
ERR_CANNOT_INITIALIZE_ARGS=An unexpected error occurred while \
 attempting to initialize the command-line arguments:  %s
ERR_ERROR_PARSING_ARGS=An error occurred while parsing the \
 command-line arguments: %s
INFO_PROCESSING_OPERATION=Processing %s request for %s
INFO_OPERATION_FAILED=%s operation failed
INFO_OPERATION_SUCCESSFUL=%s operation successful for DN %s
INFO_PROCESSING_COMPARE_OPERATION=Comparing type %s with value %s in \
 entry %s
INFO_COMPARE_OPERATION_RESULT_FALSE=Compare operation returned false for \
 entry %s
INFO_COMPARE_OPERATION_RESULT_TRUE=Compare operation returned true for \
 entry %s
INFO_DESCRIPTION_TRUSTALL=Trust all server SSL certificates
INFO_DESCRIPTION_BINDDN=DN to use to bind to the server
INFO_DESCRIPTION_BINDPASSWORD=Password to use to bind to \
 the server. Use -w - to ensure that the command prompts for the password, \
 rather than entering the password as a command argument
INFO_DESCRIPTION_BINDPASSWORDFILE=Bind password file
INFO_DESCRIPTION_ENCODING=Use the specified character set for \
 command-line input
INFO_DESCRIPTION_VERBOSE=Use verbose mode
INFO_DESCRIPTION_KEYSTOREPATH=Certificate key store path
INFO_DESCRIPTION_TRUSTSTOREPATH=Certificate trust store path
INFO_DESCRIPTION_KEYSTOREPASSWORD=Certificate key store PIN
INFO_DESCRIPTION_HOST=Directory server hostname or IP address
INFO_DESCRIPTION_PORT=Directory server port number
INFO_DESCRIPTION_SHOWUSAGE=Display this usage information
INFO_DESCRIPTION_CONTROLS=Use a request control with the provided \
 information
INFO_DESCRIPTION_CONTINUE_ON_ERROR=Continue processing even if there are \
 errors
INFO_DESCRIPTION_USE_SSL=Use SSL for secure communication with the server
INFO_DESCRIPTION_START_TLS=Use StartTLS to secure communication with the \
 server
INFO_DESCRIPTION_PROXYAUTHZID=Use the proxied authorization \
 control with the given authorization ID
INFO_DESCRIPTION_RESTART=Attempt to automatically restart the \
 server once it has stopped
INFO_DESCRIPTION_STOP_REASON=Reason the server is being stopped or \
 restarted
INFO_CHECK_STOPPABILITY=Used to determine whether the server can \
 be stopped or not and the mode to be used to stop it
INFO_DESCRIPTION_WINDOWS_NET_STOP=Used by the window service code \
 to inform that stop-ds is being called from the window services after a call \
 to net stop
INFO_DESCRIPTION_STOP_TIME=Indicates the date/time at which the \
 shutdown operation will begin as a server task expressed in format \
 YYYYMMDDhhmmssZ for UTC time or YYYYMMDDhhmmss for local time.  A value of \
 '0' will cause the shutdown to be scheduled for \
 immediate execution.  When this option is specified the operation will be \
 scheduled to start at the specified time after which this utility will exit \
 immediately
INFO_DESCRIPTION_BACKUP_ALL=Back up all backends in the server
INFO_MODIFY_DESCRIPTION_DEFAULT_ADD=Treat records with no changetype as \
 add operations
INFO_SEARCH_DESCRIPTION_BASEDN=Search base DN
INFO_SEARCH_DESCRIPTION_SIZE_LIMIT=Maximum number of entries to return \
 from the search
INFO_SEARCH_DESCRIPTION_TIME_LIMIT=Maximum length of time in seconds to \
 allow for the search
INFO_SEARCH_DESCRIPTION_SEARCH_SCOPE=Search scope ('base', 'one', 'sub', \
 or 'subordinate')
INFO_SEARCH_DESCRIPTION_DEREFERENCE_POLICY=Alias dereference policy \
 ('never', 'always', 'search', or 'find')
ERR_LDAPAUTH_UNSUPPORTED_SASL_MECHANISM=The requested SASL mechanism \
 "%s" is not supported by this client
ERR_LDAPAUTH_SASL_AUTHID_REQUIRED=The "authid" SASL property is \
 required for use with the %s mechanism
INFO_DESCRIPTION_VERSION=LDAP protocol version number
ERR_DESCRIPTION_INVALID_VERSION=Invalid LDAP version number '%s'. \
 Allowed values are 2 and 3
ERR_SEARCH_NO_FILTERS=No filters specified for the search request
INFO_DESCRIPTION_DONT_WRAP=Do not wrap long lines
INFO_DESCRIPTION_NOOP=Show what would be done but do not perform any \
 operation
INFO_DESCRIPTION_TYPES_ONLY=Only retrieve attribute names but not their \
 values
INFO_DESCRIPTION_ASSERTION_FILTER=Use the LDAP assertion control with the \
 provided filter
ERR_LDAP_ASSERTION_INVALID_FILTER=The search filter provided for the \
 LDAP assertion control was invalid:  %s
INFO_DESCRIPTION_PREREAD_ATTRS=Use the LDAP ReadEntry pre-read control
INFO_DESCRIPTION_POSTREAD_ATTRS=Use the LDAP ReadEntry post-read control
INFO_LDAPMODIFY_PREREAD_ENTRY=Target entry before the operation:
INFO_LDAPMODIFY_POSTREAD_ENTRY=Target entry after the operation:
INFO_DESCRIPTION_PROXY_AUTHZID=Use the proxied authorization control with \
 the given authorization ID
INFO_DESCRIPTION_PSEARCH_INFO=Use the persistent search control
ERR_PSEARCH_MISSING_DESCRIPTOR=The request to use the persistent \
 search control did not include a descriptor that indicates the options to use \
 with that control
ERR_PSEARCH_DOESNT_START_WITH_PS=The persistent search descriptor %s \
 did not start with the required 'ps' string
ERR_PSEARCH_INVALID_CHANGE_TYPE=The provided change type value %s is \
 invalid.  The recognized change types are add, delete, modify, modifydn, and \
 any
ERR_PSEARCH_INVALID_CHANGESONLY=The provided changesOnly value %s is \
 invalid.  Allowed values are 1 to only return matching entries that have \
 changed since the beginning of the search, or 0 to also include existing \
 entries that match the search criteria
ERR_PSEARCH_INVALID_RETURN_ECS=The provided returnECs value %s is \
 invalid.  Allowed values are 1 to request that the entry change notification \
 control be included in updated entries, or 0 to exclude the control from \
 matching entries
INFO_DESCRIPTION_REPORT_AUTHZID=Use the authorization identity control
INFO_BIND_AUTHZID_RETURNED=# Bound with authorization ID %s
INFO_SEARCH_DESCRIPTION_FILENAME=File containing a list of search filter \
 strings
INFO_DESCRIPTION_MATCHED_VALUES_FILTER=Use the LDAP matched values \
 control with the provided filter
ERR_LDAP_MATCHEDVALUES_INVALID_FILTER=The provided matched values \
 filter was invalid:  %s
ERR_LDIF_FILE_CANNOT_OPEN_FOR_READ=An error occurred while \
 attempting to open the LDIF file %s for reading:  %s
ERR_LDIF_FILE_CANNOT_OPEN_FOR_WRITE=An error occurred while \
 attempting to open the LDIF file %s for writing:  %s
ERR_LDIF_FILE_READ_ERROR=An error occurred while attempting to read \
 the contents of LDIF file %s:  %s
INFO_BIND_PASSWORD_EXPIRED=# Your password has expired
INFO_BIND_PASSWORD_EXPIRING=# Your password will expire in %s
INFO_BIND_ACCOUNT_LOCKED=# Your account has been locked
INFO_BIND_MUST_CHANGE_PASSWORD=# You must change your password before any \
 other operations will be allowed
INFO_BIND_GRACE_LOGINS_REMAINING=# You have %d grace logins remaining
INFO_DESCRIPTION_USE_PWP_CONTROL=Use the password policy request control
INFO_LDAPPWMOD_DESCRIPTION_AUTHZID=Authorization ID for the \
 user entry whose password should be changed
INFO_LDAPPWMOD_DESCRIPTION_NEWPW=New password to provide \
 for the target user
INFO_LDAPPWMOD_DESCRIPTION_NEWPWFILE=Path to a file \
 containing the new password to provide for the target user
INFO_LDAPPWMOD_DESCRIPTION_CURRENTPW=Current password for \
 the target user
INFO_LDAPPWMOD_DESCRIPTION_CURRENTPWFILE=Path to a file \
 containing the current password for the target user
ERR_LDAPPWMOD_CONFLICTING_ARGS=The %s and %s arguments may not be \
 provided together
ERR_LDAPPWMOD_FAILED=The LDAP password modify operation failed: \
 %d (%s)
ERR_LDAPPWMOD_FAILURE_ERROR_MESSAGE=Error Message:  %s
ERR_LDAPPWMOD_FAILURE_MATCHED_DN=Matched DN:  %s
INFO_LDAPPWMOD_SUCCESSFUL=The LDAP password modify operation was \
 successful
INFO_LDAPPWMOD_ADDITIONAL_INFO=Additional Info:  %s
INFO_LDAPPWMOD_GENERATED_PASSWORD=Generated Password:  %s
INFO_COMPARE_CANNOT_BASE64_DECODE_ASSERTION_VALUE=The assertion value was \
 indicated to be base64-encoded, but an error occurred while trying to decode \
 the value
INFO_COMPARE_CANNOT_READ_ASSERTION_VALUE_FROM_FILE=Unable to read the \
 assertion value from the specified file:  %s
ERR_LDAPCOMPARE_NO_DNS=No entry DNs provided for the compare \
 operation
INFO_LDAPCOMPARE_TOOL_DESCRIPTION=This utility can be used to perform \
 LDAP compare operations in the Directory Server
INFO_LDAPMODIFY_TOOL_DESCRIPTION=This utility can be used to perform LDAP \
 modify, add, delete, and modify DN operations in the Directory Server
INFO_LDAPPWMOD_TOOL_DESCRIPTION=This utility can be used to perform LDAP \
 password modify operations in the Directory Server
INFO_LDAPSEARCH_TOOL_DESCRIPTION=This utility can be used to perform LDAP \
 search operations in the Directory Server
ERR_TOOL_CONFLICTING_ARGS=You may not provide both the --%s and \
 the --%s arguments
ERR_LDAPCOMPARE_NO_ATTR=No attribute was specified to use as the \
 target for the comparison
ERR_LDAPCOMPARE_INVALID_ATTR_STRING=Invalid attribute string '%s'. \
 The attribute string must be in one of the following forms: \
 'attribute:value', 'attribute::base64value', or 'attribute:<valueFilePath'
ERR_TOOL_INVALID_CONTROL_STRING=Invalid control specification '%s'
ERR_TOOL_SASLEXTERNAL_NEEDS_SSL_OR_TLS=SASL EXTERNAL \
 authentication may only be requested if SSL or StartTLS is used
ERR_TOOL_SASLEXTERNAL_NEEDS_KEYSTORE=SASL EXTERNAL authentication \
 may only be used if a client certificate key store is specified
INFO_LDAPSEARCH_PSEARCH_CHANGE_TYPE=# Persistent search change type:  %s
INFO_LDAPSEARCH_PSEARCH_PREVIOUS_DN=# Persistent search previous entry \
 DN:  %s
INFO_LDAPSEARCH_ACCTUSABLE_HEADER=# Account Usability Response Control
INFO_LDAPSEARCH_ACCTUSABLE_IS_USABLE=#   The account is usable
INFO_LDAPSEARCH_ACCTUSABLE_TIME_UNTIL_EXPIRATION=#   Time until password \
 expiration:  %s
INFO_LDAPSEARCH_ACCTUSABLE_NOT_USABLE=#   The account is not usable
INFO_LDAPSEARCH_ACCTUSABLE_ACCT_INACTIVE=#   The account has been \
 deactivated
INFO_LDAPSEARCH_ACCTUSABLE_PW_RESET=#   The password has been reset
INFO_LDAPSEARCH_ACCTUSABLE_PW_EXPIRED=#   The password has expired
INFO_LDAPSEARCH_ACCTUSABLE_REMAINING_GRACE=#   Number of grace logins \
 remaining:  %d
INFO_LDAPSEARCH_ACCTUSABLE_LOCKED=#   The account is locked
INFO_LDAPSEARCH_ACCTUSABLE_TIME_UNTIL_UNLOCK=#   Time until the account \
 is unlocked:  %s
INFO_DESCRIPTION_KEYSTOREPASSWORD_FILE=Certificate key store PIN file
INFO_DESCRIPTION_TRUSTSTOREPASSWORD=Certificate trust store PIN
INFO_DESCRIPTION_TRUSTSTOREPASSWORD_FILE=Certificate trust store PIN file
INFO_DESCRIPTION_COUNT_ENTRIES=Count the number of entries returned by \
 the server
INFO_LDAPSEARCH_MATCHING_ENTRY_COUNT=# Total number of matching entries: \
 %d
INFO_DESCRIPTION_SIMPLE_PAGE_SIZE=Use the simple paged results control \
 with the given page size
ERR_PAGED_RESULTS_REQUIRES_SINGLE_FILTER=The simple paged results \
 control may only be used with a single search filter
INFO_DESCRIPTION_CERT_NICKNAME=Nickname of certificate for SSL client \
 authentication
ERR_TOOL_RESULT_CODE=Result Code:  %d (%s)
ERR_TOOL_ERROR_MESSAGE=Additional Information:  %s
ERR_TOOL_MATCHED_DN=Matched DN:  %s
INFO_LDAPMODIFY_DESCRIPTION_FILENAME=LDIF file containing \
 the changes to apply
INFO_DESCRIPTION_SORT_ORDER=Sort the results using the provided sort \
 order
ERR_LDAP_SORTCONTROL_INVALID_ORDER=The provided sort order was \
 invalid:  %s
INFO_DESCRIPTION_VLV=Use the virtual list view control to retrieve the \
 specified results page
ERR_LDAPSEARCH_VLV_REQUIRES_SORT=If the --%s argument is provided, \
 then the --%s argument must also be given
ERR_LDAPSEARCH_VLV_INVALID_DESCRIPTOR=The provided virtual list view \
 descriptor was invalid.  It must be a value in the form \
 'beforeCount:afterCount:offset:contentCount' (where offset specifies the \
 index of the target entry and contentCount specifies the estimated total \
 number of results or zero if it is not known), or \
 'beforeCount:afterCount:assertionValue' (where the entry should be the first \
 entry whose primary sort value is greater than or equal to the provided \
 assertionValue).  In either case, beforeCount is the number of entries to \
 return before the target value and afterCount is the number of entries to \
 return after the target value
WARN_LDAPSEARCH_SORT_ERROR=# Server-side sort failed:  %s
INFO_LDAPSEARCH_VLV_TARGET_OFFSET=# VLV Target Offset:  %d
INFO_LDAPSEARCH_VLV_CONTENT_COUNT=# VLV Content Count:  %d
WARN_LDAPSEARCH_VLV_ERROR=# Virtual list view processing failed: \
 %s
INFO_DESCRIPTION_EFFECTIVERIGHTS_USER=Use geteffectiverights control with \
 the provided authzid
INFO_DESCRIPTION_EFFECTIVERIGHTS_ATTR=Specifies geteffectiverights \
 control specific attribute list
ERR_EFFECTIVERIGHTS_INVALID_AUTHZID=The authorization ID "%s" \
 contained in the geteffectiverights control is invalid because it does not \
 start with "dn:" to indicate a user DN
INFO_DESCRIPTION_PRODUCT_VERSION=Display Directory Server version \
 information
INFO_DESCRIPTION_SCRIPT_FRIENDLY=Use script-friendly mode
ERR_LDAP_CONN_CANNOT_INITIALIZE_SSL=ERROR:  Unable to perform SSL \
 initialization:  %s
ERR_LDAP_CONN_CANNOT_PARSE_SASL_OPTION=ERROR:  The provided SASL \
 option string "%s" could not be parsed in the form "name=value"
INFO_LDAP_CONN_DESCRIPTION_SASLOPTIONS=SASL bind options
INFO_DESCRIPTION_PROP_FILE_PATH=Path to the file containing default \
  property values used for command line arguments
INFO_DESCRIPTION_NO_PROP_FILE=No properties file will be \
  used to get default command line argument values
INFO_DESCRIPTION_GENERAL_ARGS=General options:
INFO_DESCRIPTION_IO_ARGS=Utility input/output options:
INFO_DESCRIPTION_LDAP_CONNECTION_ARGS=LDAP connection options:
INFO_FILE_PLACEHOLDER={file}
INFO_KEYSTOREPATH_PLACEHOLDER={keyStorePath}
INFO_TRUSTSTOREPATH_PLACEHOLDER={trustStorePath}
INFO_BINDPWD_FILE_PLACEHOLDER={bindPasswordFile}
INFO_HOST_PLACEHOLDER={host}
INFO_PORT_PLACEHOLDER={port}
INFO_BASEDN_PLACEHOLDER={baseDN}
INFO_BINDDN_PLACEHOLDER={bindDN}
INFO_BINDPWD_PLACEHOLDER={bindPassword}
INFO_KEYSTORE_PWD_PLACEHOLDER={keyStorePassword}
INFO_TRUSTSTORE_PWD_FILE_PLACEHOLDER={path}
INFO_TRUSTSTORE_PWD_PLACEHOLDER={trustStorePassword}
INFO_NICKNAME_PLACEHOLDER={nickname}
INFO_ASSERTION_FILTER_PLACEHOLDER={filter}
INFO_FILTER_PLACEHOLDER={filter}
INFO_PROXYAUTHID_PLACEHOLDER={authzID}
INFO_SASL_OPTION_PLACEHOLDER={name=value}
INFO_PROTOCOL_VERSION_PLACEHOLDER={version}
INFO_PROP_FILE_PATH_PLACEHOLDER={propertiesFilePath}
INFO_ATTRIBUTE_PLACEHOLDER={attribute}
INFO_NUM_ENTRIES_PLACEHOLDER={numEntries}
INFO_LDAP_CONTROL_PLACEHOLDER={controloid[:criticality[:value|::b64value|:<filePath]]}
INFO_ENCODING_PLACEHOLDER={encoding}
INFO_ATTRIBUTE_LIST_PLACEHOLDER={attrList}
INFO_NEW_PASSWORD_PLACEHOLDER={newPassword}
INFO_CURRENT_PASSWORD_PLACEHOLDER={currentPassword}
INFO_SEARCH_SCOPE_PLACEHOLDER={searchScope}
INFO_SORT_ORDER_PLACEHOLDER={sortOrder}
INFO_VLV_PLACEHOLDER={before:after:index:count | before:after:value}
INFO_DEREFERENCE_POLICE_PLACEHOLDER={dereferencePolicy}
INFO_SIZE_LIMIT_PLACEHOLDER={sizeLimit}
INFO_TIME_LIMIT_PLACEHOLDER={timeLimit}
INFO_TARGETDN_PLACEHOLDER={targetDN}
INFO_KEYSTORE_PWD_FILE_PLACEHOLDER={keyStorePasswordFile}
INFO_PATH_PLACEHOLDER={path}
INFO_NAME_PLACEHOLDER={name}
INFO_PROPERTY_PLACEHOLDER={property}
INFO_UNIT_PLACEHOLDER={unit}
INFO_CONFIGCLASS_PLACEHOLDER={configClass}
INFO_CONFIGFILE_PLACEHOLDER={configFile}
INFO_STOP_REASON_PLACEHOLDER={stopReason}
INFO_STOP_TIME_PLACEHOLDER={stopTime}
INFO_BACKENDNAME_PLACEHOLDER={backendName}
INFO_BACKUPID_PLACEHOLDER={backupID}
INFO_BACKUPDIR_PLACEHOLDER={backupDir}
INFO_KEY_MANAGER_PATH_PLACEHOLDER={keyManagerPath}
INFO_KEY_MANAGER_PROVIDER_DN_PLACEHOLDER={keyManagerProviderDN}
INFO_TRUST_MANAGER_PROVIDER_DN_PLACEHOLDER={trustManagerProviderDN}
INFO_SERVER_ROOT_DIR_PLACEHOLDER={serverRootDir}
INFO_SERVICE_NAME_PLACEHOLDER={serviceName}
INFO_VALUE_SET_PLACEHOLDER={PROP:VALUE}
INFO_TYPE_PLACEHOLDER={type}
INFO_CATEGORY_PLACEHOLDER={category}
INFO_PSEARCH_PLACEHOLDER=ps[:changetype[:changesonly[:entrychgcontrols]]]
INFO_ADMINUID_PLACEHOLDER={adminUID}
INFO_NOT_AVAILABLE_LABEL=<not available>
ERR_CANNOT_READ_TRUSTSTORE=Cannot access trust store '%s'.  Verify \
 that the provided trust store exists and that you have read access rights to it
ERR_CANNOT_READ_KEYSTORE=Cannot access key store '%s'.  Verify \
 that the provided key store exists and that you have read access rights to it
INFO_DESCRIPTION_ADMIN_PORT=Directory server administration port number
INFO_DESCRIPTION_ADMIN_BINDDN=Administrator user bind DN
ERR_LDAPCOMPARE_ERROR_READING_FILE=An error occurred reading file \
 '%s'.  Check that the file exists and that you have read access rights to \
 it.  Details: %s
ERR_LDAPCOMPARE_FILENAME_AND_DNS=Both entry DNs and a file name \
 were provided for the compare operation.  These arguments are not compatible
INFO_ERROR_EMPTY_RESPONSE=ERROR: a response must be provided in order to continue
ERR_DECODE_CONTROL_FAILURE=# %s
INFO_SEARCHRATE_TOOL_DESCRIPTION=This utility can be used to measure \
  search throughput and response time of a directory service using \
  user-defined searches.\n\n\
  Example:\n\n\ \ searchrate -p 1389 -D "cn=directory manager" -w password \\\n\
  \ \ \ \ -F -c 4 -t 4 -b "dc=example,dc=com" -g "rand(0,2000)" "(uid=user.%%d)"
INFO_SEARCHRATE_TOOL_DESCRIPTION_BASEDN=Base DN format string.
INFO_MODRATE_TOOL_DESCRIPTION=This utility can be used to measure \
  modify throughput and response time of a directory service using \
  user-defined modifications.\n\n\
  Example:\n\n\ \ modrate -p 1389 -D "cn=directory manager" -w password \\\n\
  \ \ \ \ -F -c 4 -t 4 -b "uid=user.%%d,ou=people,dc=example,dc=com" \\\n\
  \ \ \ \ -g "rand(0,2000)" -g "randstr(16)" 'description:%%2$s'
INFO_MODRATE_TOOL_DESCRIPTION_TARGETDN=Target entry DN format string
INFO_AUTHRATE_TOOL_DESCRIPTION=This utility can be used to measure \
  bind throughput and response time of a directory service using \
  user-defined bind or search-then-bind operations.\n\nFormat strings may be \
  used in the bind DN option as well as the authid and authzid SASL bind \
  options. A search operation may be used to retrieve the bind DN by \
  specifying the base DN and a filter. The retrieved entry DN will be appended \
  as the last argument in the argument list when evaluating format strings.\n\n\
  Example (bind only):\n\n\ \ authrate -p 1389 -D "uid=user.%%d,ou=people,dc=example,dc=com" \\\n\
  \ \ \ \  -w password -f -c 10 -g "rand(0,2000)"\n\n\
  Example (search then bind):\n\n\ \ authrate -p 1389 -D '%%2$s' -w password -f -c 10 \\\n\
  \ \ \ \ -b "ou=people,dc=example,dc=com" -s one -g "rand(0,2000)" "(uid=user.%%d)"
INFO_OUTPUT_LDIF_FILE_PLACEHOLDER={file}
INFO_LDIFMODIFY_DESCRIPTION_OUTPUT_FILENAME=Write updated entries to %s \
 instead of stdout
INFO_LDIFDIFF_DESCRIPTION_OUTPUT_FILENAME=Write differences to %s \
 instead of stdout
INFO_LDIFSEARCH_DESCRIPTION_OUTPUT_FILENAME=Write search results to %s \
 instead of stdout
ERR_LDIFMODIFY_MULTIPLE_USES_OF_STDIN=Unable to use stdin for both the source \
 LDIF and changes LDIF
ERR_LDIFDIFF_MULTIPLE_USES_OF_STDIN=Unable to use stdin for both the source \
 LDIF and target LDIF
ERR_LDIFMODIFY_PATCH_FAILED=The changes could not be applied for the following \
 reason: %s
ERR_LDIFDIFF_DIFF_FAILED=The differences could not be computed for the following \
 reason: %s
ERR_LDIFSEARCH_FAILED=The search could not be performed for the following \
 reason: %s
INFO_LDIFMODIFY_TOOL_DESCRIPTION=This utility can be used to apply a set of \
 modify, add, and delete operations to entries contained in an LDIF file
INFO_LDIFDIFF_TOOL_DESCRIPTION=This utility can be used to compare two LDIF \
 files and report the differences in LDIF format
INFO_LDIFSEARCH_TOOL_DESCRIPTION=This utility can be used to perform search \
 operations against entries contained in an LDIF file
 #
 # MakeLDIF tool
 #
INFO_MAKELDIF_TOOL_DESCRIPTION=This utility can be used to generate LDIF \
 data based on a definition in a template file
INFO_CONSTANT_PLACEHOLDER={name=value}
INFO_SEED_PLACEHOLDER={seed}
INFO_BATCH_FILE_PATH_PLACEHOLDER={batchFilePath}
INFO_MAKELDIF_DESCRIPTION_CONSTANT=A constant that overrides the value \
 set in the template file
INFO_MAKELDIF_DESCRIPTION_LDIF=The path to the LDIF file to be written
INFO_MAKELDIF_DESCRIPTION_SEED=The seed to use to initialize the random \
 number generator
INFO_MAKELDIF_DESCRIPTION_HELP=Show this usage information
INFO_MAKELDIF_DESCRIPTION_RESOURCE_PATH=Path to look for \
 MakeLDIF resources (e.g., data files)
ERR_MAKELDIF_NO_SUCH_RESOURCE_DIRECTORY=The specified resource \
 directory %s could not be found
INFO_MAKELDIF_PROCESSED_N_ENTRIES=Processed %d entries
INFO_MAKELDIF_PROCESSING_COMPLETE=LDIF processing complete. %d entries \
 written
ERR_MAKELDIF_EXCEPTION_DURING_PARSE=An error occurred while \
 parsing template file :  %s
ERR_MAKELDIF_UNABLE_TO_CREATE_LDIF=An error occurred while \
 attempting to open LDIF file %s for writing:  %s
ERR_MAKELDIF_ERROR_WRITING_LDIF=An error occurred while writing data \
 to LDIF file %s:  %s
ERR_MAKELDIF_EXCEPTION_DURING_PROCESSING=An error occurred while \
 processing :  %s
ERR_CONSTANT_ARG_CANNOT_DECODE=Unable to parse a constant argument, \
 expecting name=value but got %s
INFO_DESCRIPTION_QUIET=Use quiet mode
INFO_DESCRIPTION_NO_PROMPT=Use non-interactive mode.  If data in \
the command is missing, the user is not prompted and the tool will fail
INFO_OPTION_ACCEPT_LICENSE=Automatically accepts the product license \
(if present)
#
# Setup messages
#
INFO_SETUP_TITLE=OPENDJ3 Setup tool
INFO_SETUP_DESCRIPTION=This utility can be used to setup the Directory Server
INFO_ARGUMENT_DESCRIPTION_CLI=Use the command line install. \
 If not specified the graphical interface will be launched.  The rest of the \
 options (excluding help and version) will only be taken into account if this \
 option is specified
INFO_ARGUMENT_DESCRIPTION_BASEDN=Base DN for user \
 information in the Directory Server.  Multiple base DNs may be provided by \
 using this option multiple times
INFO_ARGUMENT_DESCRIPTION_ADDBASE=Indicates whether to create the base \
 entry in the Directory Server database
INFO_ARGUMENT_DESCRIPTION_IMPORTLDIF=Path to an LDIF file \
 containing data that should be added to the Directory Server database. \
 Multiple LDIF files may be provided by using this option multiple times
INFO_LDIFFILE_PLACEHOLDER={ldifFile}
INFO_REJECT_FILE_PLACEHOLDER={rejectFile}
INFO_SKIP_FILE_PLACEHOLDER={skipFile}
INFO_JMXPORT_PLACEHOLDER={jmxPort}
INFO_ROOT_USER_DN_PLACEHOLDER={rootUserDN}
INFO_ROOT_USER_PWD_PLACEHOLDER={rootUserPassword}
INFO_ROOT_USER_PWD_FILE_PLACEHOLDER={rootUserPasswordFile}
INFO_HOST_PLACEHOLDER={host}
INFO_TIMEOUT_PLACEHOLDER={timeout}
INFO_GENERAL_DESCRIPTION_REJECTED_FILE=Write rejected entries to the \
 specified file
INFO_GENERAL_DESCRIPTION_SKIPPED_FILE=Write skipped entries to the \
 specified file
INFO_SETUP_DESCRIPTION_SAMPLE_DATA=Specifies that the database should \
 be populated with the specified number of sample entries
INFO_ARGUMENT_DESCRIPTION_LDAPPORT=Port on which the \
 Directory Server should listen for LDAP communication
INFO_ARGUMENT_DESCRIPTION_ADMINCONNECTORPORT=Port on which the \
 Administration Connector should listen for communication
INFO_ARGUMENT_DESCRIPTION_JMXPORT=Port on which the \
 Directory Server should listen for JMX communication
INFO_ARGUMENT_DESCRIPTION_SKIPPORT=Skip the check to determine whether \
 the specified ports are usable
INFO_ARGUMENT_DESCRIPTION_ROOTDN=DN for the initial root \
 user for the Directory Server
INFO_ARGUMENT_DESCRIPTION_ROOTPW=Password for the initial \
 root user for the Directory Server
INFO_ARGUMENT_DESCRIPTION_ROOTPWFILE=Path to a file \
 containing the password for the initial root user for the Directory Server
 INFO_ARGUMENT_DESCRIPTION_ENABLE_WINDOWS_SERVICE=Enable the server to run \
 as a Windows Service
INFO_ARGUMENT_DESCRIPTION_LDAPSPORT=Port on which the \
 Directory Server should listen for LDAPS communication.  The LDAPS port will \
 be configured and SSL will be enabled only if this argument is explicitly \
 specified
INFO_ARGUMENT_DESCRIPTION_HOST_NAME=The fully-qualified directory server \
 host name that will be used when generating self-signed \
 certificates for LDAP SSL/StartTLS, the administration connector, and \
 replication
INFO_ARGUMENT_DESCRIPTION_USE_SELF_SIGNED_CERTIFICATE=Generate a \
 self-signed certificate that the server should use when accepting SSL-based \
 connections or performing StartTLS negotiation
INFO_ARGUMENT_DESCRIPTION_USE_PKCS11=Use a certificate in a \
 PKCS#11 token that the server should use when accepting SSL-based \
 connections or performing StartTLS negotiation
INFO_ARGUMENT_DESCRIPTION_USE_JAVAKEYSTORE=Path of a Java \
 Key Store (JKS) containing a certificate to be used as the server certificate
INFO_ARGUMENT_DESCRIPTION_USE_JCEKS=Path of a JCEKS containing a \
 certificate to be used as the server certificate
INFO_ARGUMENT_DESCRIPTION_USE_PKCS12=Path of a PKCS#12 key \
 store containing the certificate that the server should use when accepting \
 SSL-based connections or performing StartTLS negotiation
INFO_ARGUMENT_CERT_OPTION_JCEKS=Use an existing certificate located on a \
 JCEKS key store
INFO_ARGUMENT_DESCRIPTION_CERT_NICKNAME=Nickname of the \
 certificate that the server should use when accepting SSL-based \
 connections or performing StartTLS negotiation
INFO_ARGUMENT_DESCRIPTION_KEYSTOREPASSWORD=Certificate key store PIN.  \
 A PIN is required when you specify to use an existing certificate \
 as server certificate
INFO_ARGUMENT_DESCRIPTION_KEYSTOREPASSWORD_FILE=Certificate key store \
 PIN file.  A PIN is required when you specify to use an existing certificate \
 as server certificate
INFO_SETUP_DESCRIPTION_DO_NOT_START=Do not start the server when the \
 configuration is completed
INFO_SETUP_DESCRIPTION_ENABLE_STARTTLS=Enable StartTLS to allow \
 secure communication with the server using the LDAP port
#
# SubCommandes messages
#
ERR_ARG_SUBCOMMAND_DUPLICATE_SUBCOMMAND=The argument parser already \
 has a %s subcommand
ERR_ARG_SUBCOMMAND_DUPLICATE_ARGUMENT_NAME=There are multiple \
 arguments for subcommand %s with name %s
ERR_ARG_SUBCOMMAND_ARGUMENT_GLOBAL_CONFLICT=Argument %s for \
 subcommand %s conflicts with a global argument with the same name
ERR_ARG_SUBCOMMAND_DUPLICATE_SHORT_ID=Argument %s for subcommand %s \
 has a short identifier -%s that conflicts with that of argument %s
ERR_ARG_SUBCOMMAND_ARGUMENT_SHORT_ID_GLOBAL_CONFLICT=Argument %s \
 for subcommand %s has a short ID -%s that conflicts with that of global \
 argument %s
ERR_ARG_SUBCOMMAND_DUPLICATE_LONG_ID=Argument %s for subcommand %s \
 has a long identifier --%s that conflicts with that of argument %s
ERR_ARG_SUBCOMMAND_ARGUMENT_LONG_ID_GLOBAL_CONFLICT=Argument %s for \
 subcommand %s has a long ID --%s that conflicts with that of global argument \
 %s
ERR_SUBCMDPARSER_DUPLICATE_GLOBAL_ARG_NAME=There is already another \
 global argument named "%s"
ERR_SUBCMDPARSER_GLOBAL_ARG_NAME_SUBCMD_CONFLICT=The argument name \
 %s conflicts with the name of another argument associated with the %s \
 subcommand
ERR_SUBCMDPARSER_DUPLICATE_GLOBAL_ARG_SHORT_ID=Short ID -%s for \
 global argument %s conflicts with the short ID of another global argument %s
ERR_SUBCMDPARSER_GLOBAL_ARG_SHORT_ID_CONFLICT=Short ID -%s for \
 global argument %s conflicts with the short ID for the %s argument associated \
 with subcommand %s
ERR_SUBCMDPARSER_DUPLICATE_GLOBAL_ARG_LONG_ID=Long ID --%s for \
 global argument %s conflicts with the long ID of another global argument %s
ERR_SUBCMDPARSER_GLOBAL_ARG_LONG_ID_CONFLICT=Long ID --%s for \
 global argument %s conflicts with the long ID for the %s argument associated \
 with subcommand %s
ERR_SUBCMDPARSER_CANNOT_READ_PROPERTIES_FILE=An error occurred \
 while attempting to read the contents of the argument properties file %s:  %s
ERR_SUBCMDPARSER_LONG_ARG_WITHOUT_NAME=The provided command-line \
 argument %s does not contain an argument name
ERR_SUBCMDPARSER_NO_GLOBAL_ARGUMENT_FOR_LONG_ID=The provided \
 argument --%s is not a valid global argument identifier
ERR_SUBCMDPARSER_NO_ARGUMENT_FOR_LONG_ID=The provided argument --%s \
 is not a valid global or subcommand argument identifier
ERR_SUBCMDPARSER_NO_VALUE_FOR_ARGUMENT_WITH_LONG_ID=Command-line \
 argument --%s requires a value but none was given
ERR_SUBCMDPARSER_VALUE_UNACCEPTABLE_FOR_LONG_ID=The provided value \
 "%s" for argument --%s is not acceptable:  %s
ERR_SUBCMDPARSER_NOT_MULTIVALUED_FOR_LONG_ID=The argument --%s was \
 included multiple times in the provided set of arguments but it does not \
 allow multiple values
ERR_SUBCMDPARSER_ARG_FOR_LONG_ID_DOESNT_TAKE_VALUE=A value was \
 provided for argument --%s but that argument does not take a value
ERR_SUBCMDPARSER_INVALID_DASH_AS_ARGUMENT=The dash character by \
 itself is invalid for use as an argument name
ERR_SUBCMDPARSER_NO_GLOBAL_ARGUMENT_FOR_SHORT_ID=The provided \
 argument -%s is not a valid global argument identifier
ERR_SUBCMDPARSER_NO_ARGUMENT_FOR_SHORT_ID=The provided argument \
 -%s is not a valid global or subcommand argument identifier
ERR_SUBCMDPARSER_NO_VALUE_FOR_ARGUMENT_WITH_SHORT_ID=Argument -%s \
 requires a value but none was provided
ERR_SUBCMDPARSER_VALUE_UNACCEPTABLE_FOR_SHORT_ID=The provided \
 value "%s" for argument -%s is not acceptable:  %s
ERR_SUBCMDPARSER_NOT_MULTIVALUED_FOR_SHORT_ID=The argument -%s was \
 included multiple times in the provided set of arguments but it does not \
 allow multiple values
ERR_SUBCMDPARSER_CANT_MIX_ARGS_WITH_VALUES=The provided argument \
 block '-%s%s' is illegal because the '%s' argument requires a value but is in \
 the same block as at least one other argument that does not require a value
ERR_SUBCMDPARSER_INVALID_ARGUMENT=The provided argument "%s" is \
 not recognized
ERR_SUBCMDPARSER_NO_VALUE_FOR_REQUIRED_ARG=The argument %s is \
 required to have a value but none was provided in the argument list and no \
 default value is available
ERR_ARGUMENT_NO_BASE_DN_SPECIFIED=You have specified \
 not to create a base DN.  If no base DN is to be created you cannot specify \
 argument '%s'
ERR_PORT_ALREADY_SPECIFIED=ERROR:  You have specified \
 the value %s for different ports
ERR_SEVERAL_CERTIFICATE_TYPE_SPECIFIED=You have \
 specified several certificate types to be used.  Only one certificate type \
 is allowed
ERR_CERTIFICATE_REQUIRED_FOR_SSL_OR_STARTTLS=You have \
 chosen to enable SSL or StartTLS.  You must specify which type of certificate \
 you want the server to use
ERR_TWO_CONFLICTING_ARGUMENTS=ERROR:  You may not \
 provide both the %s and the %s arguments at the same time
ERR_NO_KEYSTORE_PASSWORD=You must provide the PIN of the \
 keystore to retrieve the certificate to be used by the server.  You can use \
 {%s} or {%s}
ERR_SSL_OR_STARTTLS_REQUIRED=You have specified to use a \
 certificate as server certificate.  You must enable SSL (using option {%s}) \
 or Start TLS (using option %s)
ERR_NO_ROOT_PASSWORD=ERROR:  No password was provided \
 for the initial root user.  When performing a non-interactive installation, \
 this must be provided using either the %s or the %s argument
INFO_BACKUPDB_DESCRIPTION_BACKEND_ID=Backend ID for the backend to \
 archive
INFO_BACKUPDB_DESCRIPTION_BACKUP_ALL=Back up all backends in the server
INFO_SETUP_SUBCOMMAND_CREATE_DIRECTORY_SERVER=Can be used with global arguments \
to setup a directory server
INFO_SETUP_SUBCOMMAND_CREATE_PROXY=Can be used with global arguments \
to setup a proxy
ERR_INCOMPATIBLE_JAVA_VERSION=The minimum Java version required is %s.%n%n\
 The detected version is %s.%nThe binary detected is %s%n%nPlease set \
 OPENDJ_JAVA_HOME to the root of a compatible Java installation or edit the \
 java.properties file and then run the dsjavaproperties script to specify the \
 java version to be used.
INFO_INSTANCE_DIRECTORY=Instance Directory:      %s
INFO_INSTALLATION_DIRECTORY=Installation Directory:      %s
ERR_INVALID_LOG_FILE=Invalid log file %s
INFO_DESCRIPTION_CONNECTION_TIMEOUT=Maximum length of time (in \
 milliseconds) that can be taken to establish a connection.  Use '0' to \
 specify no time out
ERR_MENU_BAD_CHOICE_MULTI=Invalid response. Please enter one or \
more valid menu options
ERR_MENU_BAD_CHOICE_SINGLE=Invalid response. Please enter a valid \
menu option
ERR_MENU_BAD_CHOICE_MULTI_DUPE=The option "%s" was specified \
more than once. Please enter one or more valid menu options
INFO_MENU_PROMPT_MULTI_DEFAULT=Enter one or more choices separated by commas [%s]:
INFO_MENU_PROMPT_MULTI=Enter one or more choices separated by commas:
INFO_MENU_PROMPT_SINGLE_DEFAULT=Enter choice [%s]:
INFO_MENU_PROMPT_SINGLE=Enter choice:
INFO_MENU_PROMPT_CONFIRM=%s (%s / %s) [%s]:
INFO_MENU_OPTION_HELP=help
INFO_MENU_OPTION_HELP_KEY=?
INFO_MENU_OPTION_CANCEL=cancel
INFO_MENU_OPTION_CANCEL_KEY=c
INFO_MENU_OPTION_QUIT=quit
INFO_MENU_OPTION_QUIT_KEY=q
INFO_MENU_NUMERIC_OPTION=%d)
INFO_MENU_CHAR_OPTION=%c)
INFO_MENU_OPTION_BACK=back
INFO_MENU_OPTION_BACK_KEY=b
INFO_GENERAL_NO=no
INFO_GENERAL_YES=yes
ERR_CONSOLE_APP_CONFIRM=Invalid response. Please enter \
 "%s" or "%s"
ERR_TRIES_LIMIT_REACHED=Input tries limit reached (%d)
ERR_BAD_PORT_NUMBER=Invalid port number "%s". Please \
  enter a valid port number between 1 and 65535
INFO_OPERATION_START_TIME_MESSAGE=Operation date: %s
INFO_ERROR_READING_CONFIG_LDAP_CERTIFICATE_SERVER=Error reading data from \
 server %s.  There is an error with the certificate presented by the \
 server.\nDetails: %s
INFO_CANNOT_CONNECT_TO_REMOTE_AUTHENTICATION=The provided credentials are not \
 valid in server %s.  Details: %s
INFO_CANNOT_CONNECT_TO_REMOTE_PERMISSIONS=You do not have enough access \
 rights to read the configuration in %s. %nProvide credentials with enough \
 rights.  Details: %s
ERR_CANNOT_CONNECT_TO_REMOTE_COMMUNICATION=Could not connect to \
 %s. Check that the server is running and that it is accessible \
 from the local machine.  Details: %s
INFO_CANNOT_CONNECT_TO_REMOTE_GENERIC=Could not connect to %s.  Check that the \
 server is running and that the provided credentials are valid.%nError \
 details:%n%s
ERR_CONFIRMATION_TRIES_LIMIT_REACHED=Confirmation tries limit reached (%d)
INFO_ADMINISTRATOR_UID_PROMPT=Global Administrator User ID
INFO_ADMINISTRATOR_PWD_PROMPT=Global Administrator Password:
INFO_ADMINISTRATOR_PWD_CONFIRM_PROMPT=Confirm Password:
ERR_ADMINISTRATOR_PWD_DO_NOT_MATCH=The provided passwords do not match.
ERR_BAD_INTEGER=Invalid integer number "%s". Please enter a valid integer
INFO_DESCRIPTION_BATCH=Reads from standard input a set of commands to be executed
INFO_DESCRIPTION_BATCH_FILE_PATH=Path to a batch file containing \
a set of commands to be executed
INFO_DESCRIPTION_DISPLAY_EQUIVALENT=Display the equivalent \
 non-interactive argument in the standard output when this command is run in \
 interactive mode
INFO_DESCRIPTION_ADVANCED=Allows the configuration of advanced \
 components and properties
INFO_DESCRIPTION_REMOTE=Connect to a remote server
INFO_DESCRIPTION_CONFIG_CLASS=The fully-qualified name of the Java class \
 to use as the Directory Server configuration handler.  If this is not \
 provided, then a default of org.opends.server.extensions.ConfigFileHandler \
 will be used
INFO_DESCRIPTION_CONFIG_FILE=Path to the Directory Server \
 configuration file
INFO_DESCRIPTION_BACKUP_ID=Use the provided identifier for the \
 backup
INFO_DESCRIPTION_BACKUP_DIR=Path to the target directory for the \
 backup file(s)
INFO_DESCRIPTION_KEYMANAGER_PROVIDER_DN=DN of the \
 key manager provider to use for SSL and/or StartTLS
INFO_DESCRIPTION_TRUSTMANAGER_PROVIDER_DN=DN of \
 the trust manager provider to use for SSL and/or StartTLS
INFO_DESCRIPTION_KEYMANAGER_PATH=Path of the \
 key store to be used by the key manager provider
INFO_CONFIGURE_WINDOWS_SERVICE_DESCRIPTION_DISABLE=Disables the server as \
 a Windows service and stops the server
INFO_CONFIGURE_WINDOWS_SERVICE_DESCRIPTION_STATE=Provides information \
 about the state of the server as a Windows service
INFO_CONFIGURE_WINDOWS_SERVICE_DESCRIPTION_CLEANUP=Allows to disable the \
 server service and to clean up the windows registry information associated \
 with the provided service name
INFO_COMPARE_DESCRIPTION_FILENAME=File containing the DNs of the entries \
 to compare
INFO_DESCRIPTION_USE_SASL_EXTERNAL=Use the SASL EXTERNAL authentication \
 mechanism
INFO_DELETE_DESCRIPTION_FILENAME=File containing the DNs of the entries \
 to delete
INFO_DESCRIPTION_TIME_LIMIT=Maximum length of \
 time (in seconds) to spend processing
INFO_DESCRIPTION_IMPORTLDIF=Path to an LDIF file \
 containing data that should be added to the Directory Server database. \
 Multiple LDIF files may be provided by using this option multiple times
INFO_LDAPAUTH_PASSWORD_PROMPT=Password for user '%s':
INFO_DESCRIPTION_ADMIN_UID=User ID of the Global Administrator \
 to use to bind to the server
#
# Uninstall messages
#
INFO_UNINSTALLDS_DESCRIPTION_REMOVE_ALL=Remove all components of \
 the server (this option is not compatible with the rest of remove options)
INFO_UNINSTALLDS_DESCRIPTION_REMOVE_SERVER_LIBRARIES=Remove Server Libraries \
 and Administrative Tools
INFO_UNINSTALLDS_DESCRIPTION_REMOVE_DATABASES=Remove database contents
INFO_UNINSTALLDS_DESCRIPTION_REMOVE_LOG_FILES=Remove log files
INFO_UNINSTALLDS_DESCRIPTION_REMOVE_CONFIGURATION_FILES=Remove configuration \
 files
INFO_UNINSTALLDS_DESCRIPTION_REMOVE_BACKUP_FILES=Remove backup files
INFO_UNINSTALLDS_DESCRIPTION_REMOVE_LDIF_FILES=Remove LDIF files
INFO_DESCRIPTION_REFERENCED_HOST=The name of this host (or IP address) as \
 it is referenced in remote servers for replication
INFO_UNINSTALLDS_DESCRIPTION_FORCE=Specifies whether the uninstall should \
 continue if there is an error updating references to this server in remote \
 server instances or not.  This option can only be used with the %s no \
 prompt option.
#
# Connection messages
#
ERR_FAILED_TO_CONNECT=Unable to connect to the server at "%s" on port %s
ERR_SIMPLE_BIND_NOT_SUPPORTED=Unable to authenticate using simple \
authentication
ERR_FAILED_TO_CONNECT_WRONG_PORT=Unable to connect to the \
 server at %s on port %s. Check this port is an administration port
ERR_CANNOT_BIND_TO_PRIVILEGED_PORT=ERROR:  Unable to \
 bind to port %d.  This port may already be in use, or you may not have \
 permission to bind to it.  On UNIX-based operating systems, non-root users \
 may not be allowed to bind to ports 1 through 1024
ERR_CANNOT_BIND_TO_PORT=ERROR:  Unable to bind to port \
 %d.  This port may already be in use, or you may not have permission to bind \
 to it
ERR_FAILED_TO_CONNECT_NOT_TRUSTED=Unable to connect to the \
 server at %s on port %s. In non-interactive mode, if the trustStore related parameters are not used, \
 you must use the '--trustAll' option for remote connections
INFO_EXCEPTION_OUT_OF_MEMORY_DETAILS=Not enough memory to perform the \
 operation.  Details: %s
INFO_EXCEPTION_DETAILS=Details: %s
INFO_LDAP_CONN_PROMPT_SECURITY_LDAP=LDAP
INFO_LDAP_CONN_PROMPT_SECURITY_USE_SSL=LDAP with SSL
INFO_LDAP_CONN_PROMPT_SECURITY_USE_START_TLS=LDAP with StartTLS
INFO_LDAP_CONN_PROMPT_SECURITY_USE_TRUST_ALL=Automatically \
  trust
INFO_LDAP_CONN_PROMPT_SECURITY_TRUSTSTORE_PATH=Truststore path:
INFO_LDAP_CONN_PROMPT_SECURITY_TRUSTSTORE_PASSWORD=Password for \
  truststore '%s':
INFO_LDAP_CONN_PROMPT_SECURITY_KEYSTORE_PATH=Keystore path:
INFO_LDAP_CONN_PROMPT_SECURITY_KEYSTORE_PASSWORD=Password for keystore \
  '%s':
INFO_LDAP_CONN_HEADING_CONNECTION_PARAMETERS=>>>> Specify OpenDJ LDAP \
  connection parameters
ERR_LDAP_CONN_BAD_HOST_NAME=The hostname "%s" could not be \
  resolved. Please check you have provided the correct address
ERR_LDAP_CONN_BAD_PORT_NUMBER=Invalid port number "%s". Please \
  enter a valid port number between 1 and 65535
INFO_LDAP_CONN_PROMPT_HOST_NAME=Directory server hostname or IP address \
  [%s]:
INFO_LDAP_CONN_PROMPT_SECURITY_USE_SECURE_CTX=How do you want to connect?
INFO_LDAP_CONN_PROMPT_SECURITY_PROTOCOL_DEFAULT_CHOICE=%d
ERR_LDAP_CONN_PROMPT_SECURITY_INVALID_FILE_PATH=The provided path \
  is not valid
INFO_LDAP_CONN_PROMPT_SECURITY_TRUST_METHOD=How do you want to trust the server certificate?
INFO_LDAP_CONN_PROMPT_SECURITY_TRUSTSTORE=Use a truststore
INFO_LDAP_CONN_PROMPT_SECURITY_MANUAL_CHECK=Manually validate
INFO_LDAP_CONN_PROMPT_SECURITY_SERVER_CERTIFICATE=Server Certificate:
INFO_LDAP_CONN_SECURITY_SERVER_CERTIFICATE=%s
INFO_LDAP_CONN_PROMPT_SECURITY_TRUST_OPTION=Do you trust this server certificate?
INFO_LDAP_CONN_PROMPT_SECURITY_TRUST_OPTION_NO=No
INFO_LDAP_CONN_PROMPT_SECURITY_TRUST_OPTION_SESSION=Yes, for this session only
INFO_LDAP_CONN_PROMPT_SECURITY_TRUST_OPTION_ALWAYS=Yes, also add it to a truststore
INFO_LDAP_CONN_PROMPT_SECURITY_CERTIFICATE_DETAILS=View certificate details
INFO_LDAP_CONN_SECURITY_SERVER_CERTIFICATE_USER_DN=User DN  : %s
INFO_LDAP_CONN_SECURITY_SERVER_CERTIFICATE_VALIDITY=Validity : From '%s'%n             To '%s'
INFO_LDAP_CONN_SECURITY_SERVER_CERTIFICATE_ISSUER=Issuer   : %s
INFO_LDAP_CONN_PROMPT_SECURITY_CERTIFICATE_ALIASES=Which certificate do you want to use?
INFO_LDAP_CONN_PROMPT_SECURITY_CERTIFICATE_ALIAS=%s (%s)
INFO_LDAP_CONN_PROMPT_ADMINISTRATOR_UID=Global Administrator User ID [%s]:
INFO_LDAP_CONN_GLOBAL_ADMINISTRATOR_OR_BINDDN_PROMPT=Global Administrator \
 User ID, or bind DN if no Global Administrator is defined [%s]:
INFO_LDAP_CONN_PROMPT_PORT_NUMBER=Directory server port number [%d]:
INFO_LDAP_CONN_PROMPT_BIND_DN=Administrator user bind DN [%s]:
INFO_ADMIN_CONN_PROMPT_PORT_NUMBER=Directory server administration port number [%d]:
INFO_ERROR_CONNECTING_TO_LOCAL=An error occurred connecting to the server
INFO_CERTIFICATE_NOT_TRUSTED_TEXT_CLI=The Certificate presented by the server \
 %s:%s could not be trusted.\nPossible reasons for this error:\n\
 -The Certificate Authority that issued the certificate is not recognized (this \
 is the case of the self-signed certificates).\n-The server's certificate is \
 incomplete due to a misconfiguration.\n-The server's certificate has \
 expired.\n-There is a time difference between the server machine clock and \
 the local machine clock.\nBefore accepting this certificate, you should \
 examine the server's certificate carefully.
INFO_CERTIFICATE_NAME_MISMATCH_TEXT_CLI=The Certificate presented by the server \
 %s:%s could not be trusted.\nThere is a name mismatch between the name of \
 the server (%s) and the subject DN of the certificate.  This could be caused \
 because you are connected to a server pretending to be %s:%s.\n\
 Before accepting this certificate, you should examine the server's \
 certificate carefully.
ERR_ERROR_CANNOT_READ_CONNECTION_PARAMETERS=The connection \
 parameters could not be read due to the following error: %s
ERR_ERROR_NO_ADMIN_PASSWORD=No password was specified for \
 administrator "%s"
ERR_ERROR_BIND_PASSWORD_NONINTERACTIVE=The LDAP bind \
 password was not specified and cannot be read interactively
ERR_ERROR_INCOMPATIBLE_PROPERTY_MOD=The property \
 modification "%s" is incompatible with another modification to the same \
 property
INFO_LDAP_CONN_HEADING_CONNECTION_PARAMETERS=>>>> Specify OpenDJ LDAP \
  connection parameters
ERR_ERROR_CANNOT_READ_PASSWORD=Unable to read password
ERR_ERROR_CANNOT_READ_BIND_NAME=Unable to read bind name
ERR_ERROR_CANNOT_READ_HOST_NAME=Cannot read the host name

# Strings for generated reference documentation.
REF_TITLE_DESCRIPTION=Description
REF_TITLE_OPTIONS=Options
REF_INTRO_OPTIONS=The <command>%s</command> command takes the following options:
REF_DEFAULT=Default: %s
REF_TITLE_SUBCOMMANDS=Subcommands
REF_INTRO_SUBCOMMANDS=The <command>%s</command> command supports the following subcommands:
REF_PART_TITLE_SUBCOMMANDS=%s Subcommands Reference
REF_PART_INTRO_SUBCOMMANDS=This section covers <command>%s</command> subcommands.
REF_SHORT_DESC_UNINSTALL=remove OpenDJ directory server software

# Supplements to descriptions for generated reference documentation.
SUPPLEMENT_DESCRIPTION_CONTROLS=<xinclude:include href="variablelist-ldap-controls.xml" />