OpenDJ software implements the following RFCs, Internet-Drafts, and standards. RFC 1274: The COSINE and Internet X.500 Schema Supported standards RFC 1274 X.500 Directory Schema, or Naming Architecture, for use in the COSINE and Internet X.500 pilots. RFC 1321: The MD5 Message-Digest Algorithm Supported standards RFC 1321 MD5 message-digest algorithm that takes as input a message of arbitrary length and produces as output a 128-bit "fingerprint" or "message digest" of the input. RFC 1777: Lightweight Directory Access Protocol (LDAPv2) Supported standards RFC 1777 Provide access to the X.500 Directory while not incurring the resource requirements of the Directory Access Protocol. Classified as an Historic document. RFC 1778: The String Representation of Standard Attribute Syntaxes Supported standards RFC 1778 Defines the requirements that must be satisfied by encoding rules used to render X.500 Directory attribute syntaxes into a form suitable for use in the LDAP, then defines the encoding rules for the standard set of attribute syntaxes. Classified as an Historic document. RFC 1779: A String Representation of Distinguished Names Supported standards RFC 1779 Defines a string format for representing names, which is designed to give a clean representation of commonly used names, whilst being able to represent any distinguished name. Classified as an Historic document. RFC 2079: Definition of an X.500 Attribute Type and an Object Class to Hold Uniform Resource Identifiers (URIs) Supported standards RFC 2079 Defines a new attribute type and an auxiliary object class to allow URIs, including URLs, to be stored in directory entries in a standard way. RFC 2222: Simple Authentication and Security Layer (SASL) Supported standards RFC 2222 Describes a method for adding authentication support to connection-based protocols. RFC 2246: The TLS Protocol Version 1.0 Supported standards RFC 2246 Specifies Version 1.0 of the Transport Layer Security protocol. RFC 2247: Using Domains in LDAP/X.500 Distinguished Names Supported standards RFC 2247 Defines an algorithm by which a name registered with the Internet Domain Name Service can be represented as an LDAP distinguished name. RFC 2251: Lightweight Directory Access Protocol (v3) Supported standards RFC 2251 Describes a directory access protocol designed to provide access to directories supporting the X.500 models, while not incurring the resource requirements of the X.500 Directory Access Protocol. RFC 2252: Lightweight Directory Access Protocol (v3): Attribute Syntax Definitions Supported standards RFC 2252 Defines a set of syntaxes for LDAPv3, and the rules by which attribute values of these syntaxes are represented as octet strings for transmission in the LDAP protocol. RFC 2253: Lightweight Directory Access Protocol (v3): UTF-8 String Representation of Distinguished Names Supported standards RFC 2253 Defines a common UTF-8 format to represent distinguished names unambiguously. RFC 2254: The String Representation of LDAP Search Filters Supported standards RFC 2254 Defines the string format for representing names, which is designed to give a clean representation of commonly used distinguished names, while being able to represent any distinguished name. RFC 2255: The LDAP URL Format Supported standards RFC 2255 Describes a format for an LDAP Uniform Resource Locator. RFC 2256: A Summary of the X.500(96) User Schema for use with LDAPv3 Supported standards RFC 2256 Provides an overview of the attribute types and object classes defined by the ISO and ITU-T committees in the X.500 documents, in particular those intended for use by directory clients. RFC 2307: An Approach for Using LDAP as a Network Information Service Supported standards RFC 2307 Describes an experimental mechanism for mapping entities related to TCP/IP and the UNIX system into X.500 entries so that they may be resolved with the Lightweight Directory Access Protocol. RFC 2377: Naming Plan for Internet Directory-Enabled Applications Supported standards RFC 2377 Proposes a new directory naming plan that leverages the strengths of the most popular and successful Internet naming schemes for naming objects in a hierarchical directory. RFC 2696: LDAP Control Extension for Simple Paged Results Manipulation Supported standards RFC 2696 Allows a client to control the rate at which an LDAP server returns the results of an LDAP search operation. RFC 2713: Schema for Representing Java(tm) Objects in an LDAP Directory Supported standards RFC 2713 Defines a common way for applications to store and retrieve Java objects from the directory. RFC 2714: Schema for Representing CORBA Object References in an LDAP Directory Supported standards RFC 2714 Define a common way for applications to store and retrieve CORBA object references from the directory. RFC 2739: Calendar Attributes for vCard and LDAP Supported standards RFC 2739 Defines a mechanism to locate a user calendar and free/busy time using the LDAP protocol. RFC 2798: Definition of the inetOrgPerson LDAP Object Class Supported standards RFC 2798 Define an object class called inetOrgPerson for use in LDAP and X.500 directory services that extends the X.521 standard organizationalPerson class. RFC 2829: Authentication Methods for LDAP Supported standards RFC 2829 Specifies particular combinations of security mechanisms which are required and recommended in LDAP implementations. RFC 2830: Lightweight Directory Access Protocol (v3): Extension for Transport Layer Security Supported standards RFC 2830 Defines the "Start Transport Layer Security (TLS) Operation" for LDAP. RFC 2849: The LDAP Data Interchange Format (LDIF) - Technical Specification Supported standards RFC 2849 LDIF Specification Describes a file format suitable for describing directory information or modifications made to directory information. RFC 2891: LDAP Control Extension for Server Side Sorting of Search Results Supported standards RFC 2891 Describes two LDAPv3 control extensions for server side sorting of search results. RFC 2926: Conversion of LDAP Schemas to and from SLP Templates Supported standards RFC 2926 Describes a procedure for mapping between Service Location Protocol service advertisements and lightweight directory access protocol descriptions of services. RFC 3045: Storing Vendor Information in the LDAP root DSE Supported standards RFC 3045 Specifies two Lightweight Directory Access Protocol attributes, vendorName and vendorVersion that MAY be included in the root DSA-specific Entry (DSE) to advertise vendor-specific information. RFC 3062: LDAP Password Modify Extended Operation Supported standards RFC 3062 Describes an LDAP extended operation to allow modification of user passwords which is not dependent upon the form of the authentication identity nor the password storage mechanism used. RFC 3112: LDAP Authentication Password Schema Supported standards RFC 3112 Describes schema in support of user/password authentication in a LDAP directory including the authPassword attribute type. This attribute type holds values derived from the user's password(s) (commonly using cryptographic strength one-way hash). RFC 3377: Lightweight Directory Access Protocol (v3): Technical Specification Supported standards RFC 3377 Specifies the set of RFCs comprising the Lightweight Directory Access Protocol Version 3 (LDAPv3), and addresses the "IESG Note" attached to RFCs 2251 through 2256. RFC 3383: Internet Assigned Numbers Authority (IANA) Considerations for the Lightweight Directory Access Protocol (LDAP) Supported standards RFC 3383 Provides procedures for registering extensible elements of the Lightweight Directory Access Protocol (LDAP). RFC 3546: Transport Layer Security (TLS) Extensions Supported standards RFC 3546 Describes extensions that may be used to add functionality to Transport Layer Security. RFC 3671: Collective Attributes in the Lightweight Directory Access Protocol (LDAP) Supported standards RFC 3671 Summarizes the X.500 information model for collective attributes and describes use of collective attributes in LDAP. RFC 3672: Subentries in the Lightweight Directory Access Protocol (LDAP) Supported standards RFC 3672 Adapts X.500 subentries mechanisms for use with the Lightweight Directory Access Protocol (LDAP). RFC 3673: Lightweight Directory Access Protocol version 3 (LDAPv3): All Operational Attributes Supported standards RFC 3673 Describes an LDAP extension which clients may use to request the return of all operational attributes. RFC 3674: Feature Discovery in Lightweight Directory Access Protocol (LDAP) Supported standards RFC 3674 Introduces a general mechanism for discovery of elective features and extensions which cannot be discovered using existing mechanisms. RFC 3771: Lightweight Directory Access Protocol (LDAP) Intermediate Response Message Supported standards RFC 3771 Defines and describes the IntermediateResponse message, a general mechanism for defining single-request/multiple-response operations in Lightweight Directory Access Protocol. RFC 3829: Lightweight Directory Access Protocol (LDAP) Authorization Identity Request and Response Controls Supported standards RFC 3829 Extends the Lightweight Directory Access Protocol bind operation with a mechanism for requesting and returning the authorization identity it establishes. RFC 3876: Returning Matched Values with the Lightweight Directory Access Protocol version 3 (LDAPv3) Supported standards RFC 3876 Describes a control for the Lightweight Directory Access Protocol version 3 that is used to return a subset of attribute values from an entry. RFC 3909: Lightweight Directory Access Protocol (LDAP) Cancel Operation Supported standards RFC 3909 Describes a Lightweight Directory Access Protocol extended operation to cancel (or abandon) an outstanding operation, with a response to indicate the outcome of the operation. RFC 4346: The Transport Layer Security (TLS) Protocol Version 1.1 Supported standards RFC 4346 Specifies Version 1.1 of the Transport Layer Security protocol. RFC 4370: Lightweight Directory Access Protocol (LDAP) Proxied Authorization Control Supported standards RFC 4370 Defines the Proxy Authorization Control, that allows a client to request that an operation be processed under a provided authorization identity instead of under the current authorization identity associated with the connection. RFC 4403: Lightweight Directory Access Protocol (LDAP) Schema for Universal Description, Discovery, and Integration version 3 (UDDIv3) Supported standards RFC 4403 Defines the Lightweight Directory Access Protocol schema for representing Universal Description, Discovery, and Integration data types in an LDAP directory. RFC 4422: Simple Authentication and Security Layer (SASL) Supported standards RFC 4422 Describes a framework for providing authentication and data security services in connection-oriented protocols via replaceable mechanisms. RFC 4505: Anonymous Simple Authentication and Security Layer (SASL) Mechanism Supported standards RFC 4505 Describes a new way to provide anonymous login is needed within the context of the Simple Authentication and Security Layer framework. RFC 4510: Lightweight Directory Access Protocol (LDAP): Technical Specification Road Map Supported standards RFC 4510 Provides a road map of the LDAP Technical Specification. RFC 4511: Lightweight Directory Access Protocol (LDAP): The Protocol Supported standards RFC 4511 Describes the protocol elements, along with their semantics and encodings, of the Lightweight Directory Access Protocol. RFC 4512: Lightweight Directory Access Protocol (LDAP): Directory Information Models Supported standards RFC 4512 Describes the X.500 Directory Information Models as used in LDAP. RFC 4513: Lightweight Directory Access Protocol (LDAP): Authentication Methods and Security Mechanisms Supported standards RFC 4513 Describes authentication methods and security mechanisms of the Lightweight Directory Access Protocol. RFC 4514: Lightweight Directory Access Protocol (LDAP): String Representation of Distinguished Names Supported standards RFC 4514 Defines the string representation used in the Lightweight Directory Access Protocol to transfer distinguished names. RFC 4515: Lightweight Directory Access Protocol (LDAP): String Representation of Search Filters Supported standards RFC 4515 Defines a human-readable string representation of LDAP search filters that is appropriate for use in LDAP URLs and in other applications. RFC 4516: Lightweight Directory Access Protocol (LDAP): Uniform Resource Locator Supported standards RFC 4516 Describes a format for a Lightweight Directory Access Protocol Uniform Resource Locator. RFC 4517: Lightweight Directory Access Protocol (LDAP): Syntaxes and Matching Rules Supported standards RFC 4517 Defines a base set of syntaxes and matching rules for use in defining attributes for LDAP directories. RFC 4518: Lightweight Directory Access Protocol (LDAP): Internationalized String Preparation Supported standards RFC 4518 Defines string preparation algorithms for character-based matching rules defined for use in LDAP. RFC 4519: Lightweight Directory Access Protocol (LDAP): Schema for User Applications Supported standards RFC 4519 Provides a technical specification of attribute types and object classes intended for use by LDAP directory clients for many directory services, such as White Pages. RFC 4524: COSINE LDAP/X.500 Schema Supported standards RFC 4524 Provides a collection of schema elements for use with the Lightweight Directory Access Protocol from the COSINE and Internet X.500 pilot projects. RFC 4525: Lightweight Directory Access Protocol (LDAP) Modify-Increment Extension Supported standards RFC 4525 Describes an extension to the Lightweight Directory Access Protocol Modify operation to support an increment capability. RFC 4526: Lightweight Directory Access Protocol (LDAP) Absolute True and False Filters Supported standards RFC 4526 Extends the Lightweight Directory Access Protocol to support absolute True and False filters based upon similar capabilities found in X.500 directory systems. RFC 4527: Lightweight Directory Access Protocol (LDAP) Read Entry Controls Supported standards RFC 4527 Specifies an extension to the Lightweight Directory Access Protocol to allow the client to read the target entry of an update operation. RFC 4528: Lightweight Directory Access Protocol (LDAP) Assertion Control Supported standards RFC 4528 Defines the Lightweight Directory Access Protocol Assertion Control, which allows a client to specify that a directory operation should only be processed if an assertion applied to the target entry of the operation is true. RFC 4529: Requesting Attributes by Object Class in the Lightweight Directory Access Protocol (LDAP) Supported standards RFC 4529 Extends LDAP to support a mechanism that LDAP clients may use to request the return of all attributes of an object class. RFC 4530: Lightweight Directory Access Protocol (LDAP) entryUUID Operational Attribute Supported standards RFC 4530 Describes the LDAP/X.500 'entryUUID' operational attribute and associated matching rules and syntax. RFC 4532: Lightweight Directory Access Protocol (LDAP) "Who am I?" Operation Supported standards RFC 4532 Provides a mechanism for Lightweight Directory Access Protocol clients to obtain the authorization identity the server has associated with the user or application entity. RFC 4616: The PLAIN Simple Authentication and Security Layer (SASL) Mechanism Supported standards RFC 4616 Defines a simple clear-text user/password Simple Authentication and Security Layer mechanism called the PLAIN mechanism. RFC 4634: US Secure Hash Algorithms (SHA and HMAC-SHA) Supported standards RFC 4634 Specifies Secure Hash Algorithms, SHA-256, SHA-384, and SHA-512, for computing a condensed representation of a message or a data file. RFC 4752: The Kerberos V5 ("GSSAPI") Simple Authentication and Security Layer (SASL) Mechanism Supported standards RFC 4752 Describes the method for using the Generic Security Service Application Program Interface (GSS-API) Kerberos V5 in the Simple Authentication and Security Layer, called the GSSAPI mechanism. RFC 4876: A Configuration Profile Schema for Lightweight Directory Access Protocol (LDAP)-Based Agents Supported standards RFC 4876 Defines a schema for storing a profile for agents that make use of the Lightweight Directory Access protocol (LDAP). RFC 5020: The Lightweight Directory Access Protocol (LDAP) entryDN Operational Attribute Supported standards RFC 5020 Describes the Lightweight Directory Access Protocol (LDAP) / X.500 'entryDN' operational attribute, that provides a copy of the entry's distinguished name for use in attribute value assertions. FIPS 180-1: Secure Hash Standard (SHA-1) Supported standards FIPS 180-1 Specifies a Secure Hash Algorithm, SHA-1, for computing a condensed representation of a message or a data file. FIPS 180-2: Secure Hash Standard (SHA-1, SHA-256, SHA-384, SHA-512) Supported standards FIPS 180-2 Specifies four Secure Hash Algorithms for computing a condensed representation of electronic data. DSMLv2: Directory Service Markup Language Supported standards DSMLv2 Provides a method for expressing directory queries and updates as XML documents. JavaScript Object Notation Supported standards JSON A data-interchange format that aims to be both "easy for humans to read and write," and also "easy for machines to parse and generate." Simple Cloud Identity Management: Core Schema 1.0 Supported standards SCIM Core Schema 1.0 Platform neutral schema and extension model for representing users and groups in JSON and XML formats. OpenDJ supports the JSON formats.